; Copyright (C) 1998-2003 Promise Technology,Inc [Version] Signature="$Chicago$" Class=SCSIAdapter ClassGuid={4D36E97B-E325-11CE-BFC1-08002BE10318} Provider=%PROMISE% CatalogFile=fttxr52P.cat DriverVer=11/08/2005, 2.06.0.311 [SourceDisksNames] 1 = %DISKNAME1%,,,, 2 = %DISKNAME2%,,,, [SourceDisksFiles] fttxr52P.sys = 1 bb-run.sys = 1 ;;;dontgo.sys = 1 ; ftutil2.dll = 1 [DestinationDirs] DefaultDestDir = 12 CacheDll = 11; ;[DriverFiles_9X] [DriverFiles_NT_2K] fttxr52P.sys,,,0x20 [DriverFiles_XP] fttxr52P.sys,,,0x20 [FilterDriverFiles] bb-run.sys,,,0x20 ;;;dontgo.sys,,,0x20 [CacheDll] ;ftutil2.dll,,,0x20 [Manufacturer] %Promise%=Promise,NTamd64 [Promise.NTamd64] %PCI\VEN_105A&DEV_3571.DeviceDesc% = FasttrakPCI_Oii , PCI\VEN_105A&DEV_3571 %PCI\VEN_105A&DEV_3570.DeviceDesc% = FasttrakPCI_Oii , PCI\VEN_105A&DEV_3570 %Promise_Raid_ControllerDesc%=NODRV,SCSI\ProcessorPromise_RAID_Console____ [NODRV] AddReg=NODRV_AddReg ; [NODRV.Services] ; ; this is blank to just allow the install to succeed ; AddService = , %SPSVCINST_ASSOCSERVICE% ; null service install ;; Win9x install sections ;; ;[FasttrakPCI_Oii] ;; Windows NT4.0 and Windows 2000 install sections ;; [FasttrakPCI_Oii] Copyfiles=DriverFiles_NT_2K, FilterDriverFiles ;;;, CacheDll ;;;AddReg = DontGo.AddReg Reboot [FasttrakPCI_Oii.Services] AddService = fttxr52P, 2, FasttrakPCI_Service_Inst, Miniport_EventLog_Inst AddService = bb-run,,FilterService_Install ;;;AddService = dontgo,,DontGo.Service.Install ;; Windows XP install sections ;; [FasttrakPCI_Oii_XP] Copyfiles=DriverFiles_XP, FilterDriverFiles ;;;, CacheDll ;;;AddReg = DontGo.AddReg Reboot [FasttrakPCI_Oii_XP.Services] AddService = fttxr52P, 2, FasttrakPCI_Service_Inst, Miniport_EventLog_Inst AddService = bb-run,,FilterService_Install ;;;AddService = dontgo,,DontGo.Service.Install [FasttrakPCI_Service_Inst] ServiceType = 1 ; SERVICE_KERNEL_DRIVER StartType = 0 ; SERVICE_BOOT_START ErrorControl = 1 ; SERVICE_ERROR_NORMAL ServiceBinary = %12%\fttxr52P.sys LoadOrderGroup = "SCSI Miniport" AddReg = pnpsafe_pci_addreg, ftsata_Device_addreg ;;;;AddReg = pnpsafe_pci_addreg, ftsata_cache_addreg, ftsata_Device_addreg [FilterService_Install] DisplayName = Promise driver accelerator ServiceType = 1 StartType = 0 ErrorControl = 0 ServiceBinary = %12%\bb-run.sys LoadOrderGroup = "Filter" ;;;[DontGo.Service.Install] ;;;DisplayName = %DontGo_Service_Desc% ;;;ServiceType = 1 ;;;StartType = 0 ;;;ErrorControl = 1 ;;;ServiceBinary = %12%\DontGo.sys ;;;LoadOrderGroup = "PnP Filter" ; supporting P&P on the PCI(5) bus. [pnpsafe_pci_addreg] HKR, "Parameters\PnpInterface", "5", 0x00010001, 0x00000001 ;************************************************************* ;;;;[ftsata_cache_addreg] ;;;;HKR, "Parameters\Cache", "LongBurstDisable",0x00010001, 0x00000000 ;;;;HKR, "Parameters\Cache", "NCQTCQEnable",0x00010001, 0x00000000 [ftsata_Device_addreg] HKR, "Parameters\Device", "NumberOfRequests",0x00010001, 0x00000020 ;;;;HKLM,System\CurrentControlSet\Services\Disk,TimeOutValue,%REG_DWORD%,0x0000003c ;;;[DontGo.AddReg] ;;;HKLM, System\CurrentControlSet\Control\Class\{4d36e967-e325-11ce-bfc1-08002be10318}, UpperFilters, 0x00010008, DontGo ;;;[DontGo.DelReg] ;;;HKLM, System\CurrentControlSet\Control\Class\{4d36e967-e325-11ce-bfc1-08002be10318}, UpperFilters, 0x00018002, DontGo [NODRV_AddReg] ;************************************************************* ;The NT EventLog entries are the same for all SCSI miniports. [Miniport_EventLog_Inst] AddReg = Miniport_EventLog_AddReg [Miniport_EventLog_AddReg] HKR,,EventMessageFile,%REG_EXPAND_SZ%,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\Drivers\fttxr52P.sys" HKR,,TypesSupported,%REG_DWORD%,7 ;[IOS] ;HKR,,DevLoader,,*IOS ;HKR,,DontLoadIfConflict,,"Y" ;[WIN98.REG] ;HKR,,PortDriver,,98DriverName.mpd [strings] DISKNAME1="Promise FastTrak 519/579/719/779 Software Raid5 Driver Diskette" DISKNAME2="Windows system" Promise="Promise Technology" PCI\VEN_105A&DEV_3571.DeviceDesc="Windows Promise FastTrak TX2200 (tm) Controller (x86_64)" PCI\VEN_105A&DEV_3570.DeviceDesc="Windows Promise FastTrak TX2300 (tm) Controller (x86_64)" Promise_Raid_ControllerDesc= "Windows Promise RAID Console SCSI Processor Device" ;;;DontGo_Service_Desc = "Promise Removable Disk Control Driver" REG_EXPAND_SZ=0x00020000 REG_DWORD=0x00010001 SPSVCINST_ASSOCSERVICE = 0x00000002Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.