======================================================================
Release notes for the
Intel(R) Embedded Graphics driver package for Microsoft* Windows*
Version 5.0 February 2006
======================================================================
Contents
========
- New Features
- System Requirements
- In This Release
- Installation and De-installation
- Software Errata
- Software Licenses
- Legal / Disclaimers
New Features
============
The IEGD 5.0 release contains the following new features and capabilities:
- Intel® 945G Chipset Support (2D support only)
- Intel® 945GM Chipset Support (2D support only)
- Intel® 852GM Chipset Support
- Dual Digital Transmitter Support on Serial DVO
- Support for Silicon Image* Sil1362 / Sil1364 SDVO transmitters
- Enhanced Clone mode support for use with different sized displays
- Ability to use PCI based graphics as the primary display, and integrated
graphics as secondary
- Ability to configure port names used in the Runtime GUI
- Ability to change resolution/refresh rates for Clone displays in the
Runtime GUI
- Expanded 2D Acceleration in Microsoft Windows CE.NET (4.2 and 5.0)
OS Support Changes:
- Support for SUSE Enterprise Server (SLES) 9
- Windows XP SP2
- No longer supported is Microsoft Windows NT 4.0, Microsoft Windows XP SP1,
and SUSE Linux 8
This release also contains fixes for errata. For details on Windows errata,
including status and priority information, refer to the Errata document included
with this release.
System Requirements
====================
Development system should have one the following Windows operating
systems installed.
Microsoft* Windows XP SP2
Microsoft* Windows XP Professional* SP2
Microsoft* Windows XP Embedded* SP2
Microsoft* Windows 2000* SP4
Microsoft* Windows NT* 4.0 SP6
Target system must contain one of the following Intel Chipsets:
Intel(R) 945G Chipset
Intel(R) 945GM Chipset
Intel(R) 915GM Chipset
Intel(R) 915GV Chipset
Intel(R) 855GME Chipset
Intel(R) 852GM Chipset
Intel(R) 852GME Chipset
Intel(R) 845GV Chipset
Intel(R) 815 Chipset
Intel(R) 815E Chipset
Please check with your system provider to determine Intel Chipset
used in your system.
The drivers provided by this package have been tested using the
following firmware version:
AMI* BIOS version: 08.00.09
AMI* BIOS build date: 05/21/2003
AMI* BIOS ID: 049
The system should contain a minimum of 128MB of RAM.
In This Release (Bill of Materials)
===================================
This package contains the following files:
Documents\RELNOTES.TXT Release Notes
Documents\UsersGuide.pdf IEGD User's Guide
License\display_license.txt License agreement for display driver
Driver\igdmini.sys Display driver
Driver\igddis.dll Hi level Interface Dynamic Link Library
Driver\igd3dalm.dll Direct3D support Dynamic Link Library
Driver\ssigd.inf Install file for Display driver
Driver\ssigd_alm.sld Windows XP* Embedded Component definition
file (other than 815 platforms)
Driver\ssigd_wht.sld Windows XP* Embedded Component definition
file for 815 platforms
Driver\d3dutil.sys Driver supporting Direct3D* capabilities
Driver\ch7009.sys Port driver for Chrontel CH7009/CH7301 encoder
Driver\ch7017.sys Port driver for Chrontel CH7017/CH7305 encoder
Driver\fs454.sys Port driver for Focus 453/454 TVOut encoder
Driver\lvds.sys Port driver for Internal (GMCH) LVDS controller
Driver\ns2501.sys Port driver for National 2501 LVDS controller
Driver\ns387.sys Port driver for National 387R LVDS controller
Driver\th164.sys Port driver for Thine 164 encoder
Driver\sii164.sys Port driver for Silicon Image 164 encoder
Driver\sdvo.sys Port driver for SDVO devices
Utilities\display_license.txt License file for display driver
Utilities\IEGDGUI.dll Library file for display modes GUI
Utilities\IEGDGUI.exe Stand-alone display modes GUI executable
Utilities\pcf2iegd.exe Utility for conversion of PCF files
Utilities\qt-mt332.dll Library required for display modes GUI
Utilities\Setup.exe Install/uninstall utility for driver
Utilities\SetupNT.exe Install/uninstall utility for Windows NT
version of driver
Installation and De-installation
================================
This release contains an installer/uninstaller utility. This utility
however does not configure the driver. Please be sure to update your
ssigd.inf file with appropriate settings for your display configuration
prior to installation. The installation program requires specific file
names, so if you have a different INF file for driver installation, you
must name it ssigd.inf and place it in the Drivers folder prior to
running the installation.
Do not move or alter the directories after unzipping the release
package. The installation utility uses relative path information, and
must be run from the Utilities folder, and also requires the Driver
folder. If the folders are moved or renamed, the installation utility
will not operate properly.
Also, be sure to not install this version of the driver with an
existing installation of a previous version of the driver. The
installation utility will not uninstall previous versions of the Intel
Embedded Graphics Driver, and you must begin from a fresh operating
system installation. Results are unpredictable if you install over a
previous version of the Intel Embedded Graphics Driver.
To run the installation, simply run the Setup.exe program located in
the Utilities folder of the installation. This must run from the
Utilities folder.
If you are running Microsoft Windows NT*, you must instead run
SetupNT.exe.
To uninstall this version of Intel Embedded Graphics Driver, run the
Setup.exe program (or SetupNT.exe for Microsoft Windows NT).
Software Errata
===============
Please see the errata document included with this release for errata
details.
Software Licenses
=================
The Intel(R) Embedded Graphics Display Driver for Windows* is subject
to the terms of the license agreement located in the
License folder in this distribution package.
Legal / Disclaimers
===================
Copyright (C) 2003, 2004, 2005, Intel Corporation. All rights reserved.
Intel Corporation assumes no responsibility for errors or omissions in
this document. Nor does Intel make any commitment to update the
information contained herein.
* Other product and corporate names may be trademarks of other
companies are used only for explanation and to the owners' benefit,
without intent to infringe.
======================================================================
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.