P5I430TX TITANIUM I AWARD BIOS V2.4S note. How to use QDIFLASH.EXE utility: 1. Please press F5 to bypass config.sys and autoexec.bat when booting to DOS. 2. Run utility as follow: A:> QDIFLASH T1_v24s.BIN <Enter> 3. On the utility picture, a message "Do you want to save BIOS (Y/N)" will be displayed. If you want to save the BIOS on the motherboard for referance, press 'Y'; then, utility will ask you to give path and filename for backuping ROM BIOS. 4. Furthmore, a message "Are you sure to program (Y/N)" will appear. To upgrade BIOS, press 'Y'. After the utility finishes the upgrading procedure, press RESET button or turn power off and on to reboot system. Warning: Avoid power-off incidently in upgrading procedure, or system would fail to reboot!Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.