bccfg.inf Driver File Contents (Broadcom_SATA_RAID_v.4.1.1_WinXP_64bit.zip)

;-----------------------------------------------------------------------------
;
; bccfg.inf - Installation for Ciprico RAIDCore(tm) 
;   configuration device driver
;
; Copyright (c) 2002-2008 Ciprico, Inc.  All rights reserved.
;-----------------------------------------------------------------------------

;-----------------------------------------------------------------------------
; - This version supports Windows 2000 and later operating systems.
; - Class and ClassGUID specify the type of driver and must match
;     (see $DDKPATH/inc/api/devguid.h).
; - Driver provided by Ciprico Inc. for RAIDCore(tm) 4.1 software.
;   (2008162.1)
[Version]
Signature = "$Windows NT$"
Class = System
ClassGUID = {4d36e97d-e325-11ce-bfc1-08002be10318}
Provider = %CIPRICO%
CatalogFile = bccfg.cat
DriverVer = 06/11/2008,4.1.8162.1

;-----------------------------------------------------------------------------
; - All supported devices are on enumerable buses (i.e., PCI).
[ControlFlags]
ExcludeFromSelect = *

;-----------------------------------------------------------------------------
[SourceDisksNames]
0 = %bccfg_Desc%

;-----------------------------------------------------------------------------
[SourceDisksFiles]
bccfg.sys = 0

;-----------------------------------------------------------------------------
; - 12 is the magic number for %WinDir%\System32\Drivers
[DestinationDirs]
bccfg.Files = 12

;-----------------------------------------------------------------------------
[Manufacturer]
%CIPRICO% = CIPRICO,ntamd64

;-----------------------------------------------------------------------------
[CIPRICO.ntamd64]
%bccfg_Desc%    = bccfg_Inst, SCSI\ProcessorRAIDCORE
%bccfg_Desc%    = bccfg_Inst, SCSI\ProcessorRAIDCORE___Configuration
%bccfg_Desc%    = bccfg_Inst, RAIDCORE___ConfigurationV
%bccfg_Desc%    = bccfg_Inst, SCSI\RAIDCORE___ConfigurationV
%bccfg_Desc%    = bccfg_Inst, ProcessorRAIDCOREConfiguration___V1.1
%bccfg_Desc%    = bccfg_Inst, SCSI\ProcessorRAIDCOREConfiguration___V1.1
%MultiCardDesc% = bccfg_Inst, ProcessorRAIDCOREMultiCard_______V1.1
%MultiCardDesc% = bccfg_Inst, SCSI\ProcessorRAIDCOREMultiCard_______V1.1
%MultiCardDesc% = bccfg_Inst, ProcessorRAIDCORE_______MultiCardV1.1
%MultiCardDesc% = bccfg_Inst, SCSI\ProcessorRAIDCORE_______MultiCardV1.1

;-----------------------------------------------------------------------------
[bccfg_Inst]
AddReg = bccfg_Inst_AddReg
DelFiles = bccfg.Files
CopyFiles = bccfg.Files

;-----------------------------------------------------------------------------
[bccfg.Files]
bccfg.sys,,,0x00001000

;-----------------------------------------------------------------------------
[bccfg_Inst.Services]
AddService = , %SPSVCINST_ASSOCSERVICE%   ; null service install
;-----------------------------------------------------------------------------

[bccfg_Inst_AddReg]
HKR, "Parameters\raidcore", "level", %REG_DWORD%, 0x00000001
HKLM,System\CurrentControlSet\Services\bccfg,Type,%REG_DWORD%,1
HKLM,System\CurrentControlSet\Services\bccfg,Start,%REG_DWORD%,1
HKLM,System\CurrentControlSet\Services\bccfg,ErrorControl,%REG_DWORD%,1
HKLM,System\CurrentControlSet\Services\bccfg,ImagePath,%REG_EXPAND_SZ%,"system32\DRIVERS\bccfg.sys"


;-----------------------------------------------------------------------------
[Strings]
; - Localizable strings.
CIPRICO = "Ciprico Inc."
bccfg_Desc = "Ciprico RAIDCore(tm) Configuration Device [storport]"
MultiCardDesc     = "Ciprico RAIDCore(tm) MultiCard Device [storport]"
ConfigServiceName = "Ciprico RAIDCore(tm) Configuration Device [storport]"

; - Non-localizable strings (i.e., constants).
SPSVCINST_ASSOCSERVICE = 0x00000002
SERVICE_BOOT_START = 0x0
SERVICE_SYSTEM_START = 0x1
SERVICE_AUTO_START = 0x2
SERVICE_DEMAND_START = 0x3
SERVICE_DISABLED = 0x4
SERVICE_KERNEL_DRIVER = 0x1
SERVICE_ERROR_IGNORE = 0x0
SERVICE_ERROR_NORMAL = 0x1
SERVICE_ERROR_SEVERE = 0x2
SERVICE_ERROR_CRITICAL = 0x3
REG_EXPAND_SZ = 0x00020000
REG_DWORD = 0x00010001

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.81