oemsetup.inf Driver File Contents (drlnk64_pci_drv_v41.exe)

;---------------------------------------------------------------------------
; OEMSETUP file for Adaptec DuraLAN Fast Ethernet NIC Driver
;
; Copyright 1994-1998, Adaptec, Inc.
;
; Supported Windows NT versions:
;   3.51 or later
;
; Supported Adaptec PCI adapters:
;   AIC6915 based boards - ANA6X0XX, ANA62011/TX, ANA62022,
;                          ANA62044, ANA69011/TX
;
;
; Usage:
;
;     This file is the installation/configuration/deinstallation
;     procedure of the Adaptec ADPTSF miniport driver for Windows NT.
;     It can be called from Windows Setup directly, or via the Windows
;     NT Networks Control Program Applet (NCPA) from inside the Windows
;     Control Panel.
;
;---------------------------------------------------------------------------
[Identification]
    OptionType = NetAdapter

[PlatformsSupported]
    PCI

[Options]
ANA6XXXX		; Any Adaptec Adptsf-based PCI Fast Ethernet Adapter
ANA62011TX		; Single 10/100 Mb/s UTP Port
ANA62022		; 2 each 10/100 Mb/s UTP Port
ANA62044		; 4 each 10/100 Mb/s UTP Port
ANA69011TX		; Single 10/100 Mb/s UTP Port

; Any Adaptec Adptsf-based PCI Fast Ethernet Adapter
[ConnectionChoicesANA6XXXX]
    Connect_0 = "Autodetect Default Connection",8
    Connect_5 = "10 Mbps UTP/Half Duplex", 3
    Connect_6 = "10 Mbps UTP/Full Duplex", 259
    Connect_7 = "100 Mbps TX/Half Duplex", 15
    Connect_8 = "100 Mbps TX/Full Duplex", 271

; Single 10/100 Mb/s UTP Port
[ConnectionChoicesANA62011TX]
    Connect_0 = "Autodetect Default Connection",8
    Connect_5 = "10 Mbps UTP/Half Duplex", 3
    Connect_6 = "10 Mbps UTP/Full Duplex", 259
    Connect_7 = "100 Mbps TX/Half Duplex", 15
    Connect_8 = "100 Mbps TX/Full Duplex", 271

; 2 each 10/100 Mb/s UTP Port
[ConnectionChoicesANA62022]
    Connect_0 = "Autodetect Default Connection",8
    Connect_5 = "10 Mbps UTP/Half Duplex", 3
    Connect_6 = "10 Mbps UTP/Full Duplex", 259
    Connect_7 = "100 Mbps TX/Half Duplex", 15
    Connect_8 = "100 Mbps TX/Full Duplex", 271

; 4 each 10/100 Mb/s UTP Port
[ConnectionChoicesANA62044]
    Connect_0 = "Autodetect Default Connection",8
    Connect_5 = "10 Mbps UTP/Half Duplex", 3
    Connect_6 = "10 Mbps UTP/Full Duplex", 259
    Connect_7 = "100 Mbps TX/Half Duplex", 15
    Connect_8 = "100 Mbps TX/Full Duplex", 271

; Single 10/100 Mb/s UTP Port
[ConnectionChoicesANA69011TX]
    Connect_0 = "Autodetect Default Connection",8
    Connect_5 = "10 Mbps UTP/Half Duplex", 3
    Connect_6 = "10 Mbps UTP/Full Duplex", 259
    Connect_7 = "100 Mbps TX/Half Duplex", 15
    Connect_8 = "100 Mbps TX/Full Duplex", 271

[CFIDS]
AIC6915CFID = 1763020804        ;; 0x69159004

[FileConstants]
;---General--- 
DRIVERNAME	= ""				; use correct ndis driver SS
PATH            = "Windows\i386\"
UtilityInf      = "UTILITY.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer    = "Adaptec"
ProductMajorVersion     = "4"
ProductMinorVersion     = "1"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)
VendorID = 36868  ;; 9004
OptionHelpFile = "ADPTSFSA.hlp"

;---Software---
ProductSoftwareName     = "ADPTSF"
ProductSoftwareTitle    = "Adaptec DuraLAN Fast Ethernet NIC Driver"
NetRuleSoftwareType     = "ADPTSFSys ndisDriver ADPTSFDriver"
NetRuleSoftwareUse      = $(SoftwareType)
NetRuleSoftwareBindForm = """ADPTSFSys"" yes no container"
NetRuleSoftwareClass    = {"ADPTSFDriver basic"}
NetRuleSoftwareSWBindable = {"ADPTSFDriver ADPTSFAdapter non exclusive 100"}


;---Hardware---
ProductHardwareName = "ADPTSF"

;  Any Adaptec Adptsf-based PCI Fast Ethernet Adapter
FunctionANA6XXXXTitle = "Adaptec DuraLAN NIC Configuration"
ProductHardwareANA6XXXXTitle = "Adaptec DuraLAN NIC"
ProductHardwareANA6XXXXDescription = "Adaptec DuraLAN Fast Ethernet NIC"
NetRuleHardwareANA6XXXXType  = "ADPTSF ADPTSFAdapter"
NetRuleHardwareANA6XXXXClass = {"ADPTSFAdapter basic"}
AdapterANA6XXXXType = 5  ;; PCI board
HelpANA6XXXXId = 10

; Single 10.100 Mb/s UTP Port
FunctionANA62011TXTitle = "Adaptec ANA62011/TX Configuration"
ProductHardwareANA62011TXTitle = "Adaptec DuraLAN NIC"
ProductHardwareANA62011TXDescription = "Adaptec DuraLAN Fast Ethernet NIC"
NetRuleHardwareANA62011TXType  = "ADPTSF ADPTSFAdapter"
NetRuleHardwareANA62011TXClass = {"ADPTSFAdapter basic"}
AdapterANA62011TXType = 5  ;; PCI board
HelpANA62011TXId = 10

; 2 each 10/100 Mb/s UTP Port
FunctionANA62022Title = "Adaptec ANA62022 Configuration"
ProductHardwareANA62022Title = "Adaptec DuraLAN NIC"
ProductHardwareANA62022Description = "Adaptec DuraLAN Fast Ethernet NIC"
NetRuleHardwareANA62022Type  = "ADPTSF ADPTSFAdapter"
NetRuleHardwareANA62022Class = {"ADPTSFAdapter basic"}
AdapterANA62022Type = 5  ;; PCI board
HelpANA62022Id = 10

; 4 each 10/100 Mb/s UTP Port
FunctionANA62044Title = "Adaptec ANA62044 Configuration"
ProductHardwareANA62044Title = "Adaptec DuraLAN NIC"
ProductHardwareANA62044Description = "Adaptec DuraLAN Fast Ethernet NIC"
NetRuleHardwareANA62044Type  = "ADPTSF ADPTSFAdapter"
NetRuleHardwareANA62044Class = {"ADPTSFAdapter basic"}
AdapterANA62044Type = 5  ;; PCI board
HelpANA62044Id = 10

; Single 10.100 Mb/s UTP Port
FunctionANA69011TXTitle = "Adaptec ANA69011/TX Configuration"
ProductHardwareANA69011TXTitle = "Adaptec DuraLAN NIC"
ProductHardwareANA69011TXDescription = "Adaptec DuraLAN Fast Ethernet NIC"
NetRuleHardwareANA69011TXType  = "ADPTSF ADPTSFAdapter"
NetRuleHardwareANA69011TXClass = {"ADPTSFAdapter basic"}
AdapterANA69011TXType = 5  ;; PCI board
HelpANA69011TXId = 10

NetRuleHardwareBindForm = " yes yes container"
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"

[GeneralConstants]
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle            = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers

[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
    
[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)
    
[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
        ifstr(i) $($1) == ""
           goto returnoptions
        endif
        set PlatformList = ^(PlatformsSupported, 1)
        Ifcontains(i) $($1) in $(PlatformList)
           goto returnoptions
        else
           set Status = STATUS_NOTSUPPORTED
           goto finish_ReturnOptions
        endif
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_ReturnOptions
    endif
    
returnoptions = +
    Debug-Output "returnoptions ..."
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Debug-Output "finish_ReturnOptions ..."
    Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
; start getting win version  SS 
    set  CurrentVersionValue = ""
;    set !DebugOutputControl = 1
    OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion" $(!REG_KEY_READ) KeyWinNT
    ifstr(i) $(KeyWinNT) != ""
        GetRegValue $(KeyWinNT) "CurrentVersion" CurrentVersionValue
        CloseRegKey $(KeyWinNT)
    endif

    Debug-Output "CurrentVersionValue="$(CurrentVersionValue)

    set m_WinNTVersion = *($(CurrentVersionValue),4)

    Debug-Output "m_WinNTVersion = "$(m_WinNTVersion)
; start getting win version  SS

    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    read-syms CFIDS
    
    set NetRuleSoftwareBindable = $($R1)
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
        set Continue = "OK"
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(Function$(Option)Title)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    
    ifcontains(i) $(m_WinNTVersion) in {"3.50", "3.51"}  ; use correct ndis driver SS
	; WinNT 3.5x
	set DRIVERNAME = "ADPTSF30.SYS" 
    else
	; WinNT 4.x
	set DRIVERNAME = "ADPTSF40.SYS"
    endif

    Debug-Output "Exiting Install Options="$(DRIVERNAME)

   ;    Set !DebugOutputControl = 1

    EndWait
Begin = +
    Debug-Output "Begin ..."
    Debug-Output "BeginDriverName="$(DRIVERNAME)

    Ifstr(i) $(!NTN_InstallMode) == deinstall
        set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
        set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
        set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
          Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
               Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
               ifint $($ShellCode) != $(!SHELL_CODE_OK)
                     goto ShellCodeError
               endif
               set Error = $($R0)
               set from = end
               set to = end
               goto nonfatalinfo
          else
               set StartLabel = configureadapter
          endif
   else
        set StartLabel = installadapter
        set OEM_ABANDON_OPTIONS = {}
        set OEM_ABANDON_SOFTWARE = FALSE
        set OEM_ABANDON_ON = TRUE
    endif
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)
installadapter = +
    Debug-Output "installadapter ..."
    Debug-Output "installadapter DriverName="$(DRIVERNAME)

    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        CloseRegKey $(KeyProduct)
        ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
           Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
               $(ProductVersion)
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               goto ShellCodeError
           endif
           goto end
        else
           Shell $(UtilityInf), CardExistedDlg
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
              goto ShellCodeError
           endif
           ifstr(i) $($R1) != "OK"
               set CommonStatus = STATUS_USERCANCEL
               goto end
           endif
           set OldVersionExisted = $(TRUE)
        endif
    Endif
    ifstr(i) $(DoCopy) == "YES"
        Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
        Ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Goto ShellCodeError
        Else-Ifstr(i) $($R0) == STATUS_FAILED
            Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
               goto ShellCodeError
            endif
            set Error = $($R0)
               Goto fatal
        Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
               Goto successful
        Endif
        Set SrcDir = $($R1)
    endif
   goto installproduct
configureadapter = +
   Debug-Output "configureadapter ..."
   Ifstr(i) $(KeyProduct) == $(KeyNull)
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
        Ifstr $(KeyProduct) == $(KeyNull)
            Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
           Goto fatalregistry
        Endif
    Endif
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
        Goto fatalregistry
    endif
    set KeyParameters = $($R2)
    CloseRegKey $($R1)
    Ifstr $(KeyParameters) == $(KeyNull)
        set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
        goto fatalregistry
    endif
    set OldVersionExisted = $(TRUE)
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
    EnumRegValue $(KeyParameters) ValueList
    ForListDo $(ValueList)
        set ValueItem = $($)
        set ValueName = *($(ValueItem),1)
        set ValueData = *($(ValueItem),4)
        Ifstr(i) $(ValueName) == "ConnectionType"
            set ConnectionIndex = $(ValueData)
        endif
    EndForListDo
    set ConnectionValue = *($(ConnectionList), ~($(ConnectionValues),$(ConnectionIndex)))
adapteroptions = +
        Debug-Output "adapteroptions ..."
        set from = adapteroptions

	; Unattended installation
	ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
	    goto SkipGui
	endif

        read-syms FileDependentDlg$(!STF_LANGUAGE)
        SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
        ui start "InputDlg"
        ifstr(i) $(DLGEVENT) == "CONTINUE"
           set ConnectionIndex = $(Combo1Out)
           ui pop 1
        else-ifstr(i) $(DLGEVENT) == "BACK"
           set CommonStatus = STATUS_USERCANCEL
           ui pop 1
           goto end
        else
           ui pop 1
           goto end
        endif
        set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))

SkipGui = +	; Unattended installation
        ifstr(i) $(!NTN_InstallMode) == configure
           goto updateparameters
        endif
;        
installproduct =+
    Debug-Output "installproduct ..."
    StartWait
;    
	set ProductSoftwareImagePath = "\SystemRoot\system32\drivers\"$(DRIVERNAME)
    ifint $(OldVersionExisted) == $(FALSE)
        Ifstr(i) $(DoCopy) == "YES"
           Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
           Ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Goto ShellCodeError
           Else-Ifstr(i) $($R0) == STATUS_FAILED
               Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
               ifint $($ShellCode) != $(!SHELL_CODE_OK)
                  goto ShellCodeError
               endif
               set Error = $($R0)
               Goto fatal
           Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
               Goto successful
           Endif
           Set SrcDir = $($R1)
        Endif
        install "Install-Option"
; Installation of below files done here to fix clean install problems- JTJ
        install "Install-Hlp"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
           Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               goto ShellCodeError
           endif
           set Error = $($R0)
           goto fatal
        endif

	Debug-Output "Installproduct DriverName="$(DRIVERNAME)

        Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), +
            $(ProductSoftwareName), +
            $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
            $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
            $(NetEventDLL)
        Set OEM_ABANDON_SOFTWARE = TRUE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            CloseRegKey $($R1)
            CloseRegKey $($R2)
            CloseRegKey $($R3)
            CloseRegKey $($R4)
            CloseRegKey $($R5)
            goto fatalregistry
        endif
        Set SoftProductKey      = $($R1)
        Set SoftNetRuleKey      = $($R2)
        Set SoftServiceKey      = $($R3)
        Set SoftParameterKey    = $($R4)
        Set SoftLinkageKey      = $($R5)
        set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                           {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                           {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                           {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
                           {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
                           {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                           {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
        Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            CloseRegKey $(SoftProductKey)
            CloseRegKey $(SoftNetRuleKey)
            CloseRegKey $(SoftServiceKey)
            CloseRegKey $(SoftParameterKey)
            CloseRegKey $(SoftLinkageKey)
            goto fatalregistry
        endif
        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
                            {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                            {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                            {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                            {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareSWBindable)}, +
                            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
        Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        CloseRegKey $(SoftProductKey)
        CloseRegKey $(SoftNetRuleKey)
        CloseRegKey $(SoftServiceKey)
        CloseRegKey $(SoftParameterKey)
        CloseRegKey $(SoftLinkageKey)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            goto fatalregistry
        endif
    endif
    
;----------------------------------
;search for all CFIDs we support 
;----------------------------------
    set AdapterFound = $(FALSE)

    set CFIDList = ^(CFIDS, 1)          
    ForListDo $(CFIDList)
    
    set CurrCFID = $($)    
    
    Debug-Output "ADPTSF: Current CFID="$(CurrCFID)

    set-div DeviceID = $(CurrCFID) 65536
    Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    
    ifstr(i) $($R0) != {}
        set AdapterList = $($R0)
        set AdapterFound = $(TRUE)
        ;----------------------------------
        ;search for CFID based PCI adapters 
        ;----------------------------------

        ForListDo $(AdapterList)
            set BusNum = *($($),1)
            set DeviceNum = *($($),2)
            set FunctionNum = *($($),3) 
            
            Debug-Output "EMPCI: BusNum="$(BusNum)" DeviceNum="$(DeviceNum) 

            Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
                $(DeviceNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) "YES"
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            ifstr $($R0) != "NO_ERROR"
                set Error = $($R0)
                goto fatal
            endif
            ifstr(i) $($R1) != "YES"
                Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
                ifint $($R4) != -1
                    Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
                endif
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    goto ShellCodeError
                endif
                set RegistryErrorIndex = $($R0)
                Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
                     EndWait
                     CloseRegKey $($R1)
                     CloseRegKey $($R2)
                     CloseRegKey $($R3)
                     goto fatalregistry
                endif

		; Unattended installation
		ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
		    goto SkipAdapterOptions
		endif

                read-syms FileDependentDlg$(!STF_LANGUAGE)
                SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
                ui start "InputDlg"
                ifstr(i) $(DLGEVENT) == "CONTINUE"
                     set ConnectionIndex = $(Combo1Out)
                     ui pop 1
                else-ifstr(i) $(DLGEVENT) == "BACK"
                     set CommonStatus = STATUS_USERCANCEL
                     ui pop 1
                     goto fatal
                else
                     ui pop 1
                     goto end
                endif

SkipAdapterOptions = +
                set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
                Set HardNetCardKey      = $($R1)
                Set HardNetRuleKey      = $($R2)
                Set HardParameterKey    = $($R3)
                set AdapterNumber       = $($R4)
                set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                                    {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
                                    {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
                                    {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                                    {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                                    {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
                Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                     goto ShellCodeError
                endif
                set BusTypeNum = 5
                set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
                                    {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                                    {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
                                    {AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$(CurrCFID)}}
                Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    goto ShellCodeError
                endif

                set NewValueList = {{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}}
                Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    goto ShellCodeError
                endif

                set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
                set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
                set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
                                    {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                                    {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
                                    {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
                Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    goto ShellCodeError
                endif
                CloseRegKey $(HardNetCardKey)
                CloseRegKey $(HardNetRuleKey)
                set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
                                    {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
                                    {FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)}}
                Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
                CloseRegKey $(HardParameterKey)
            endif       
        EndForListDo    ;$(AdapterList)
    endif           ;ifstr(i) $($R0) != {}
    
    EndForListDo    ;$(CFIDList)
    
    ifint $(AdapterFound) == $(FALSE)
        set Error = $(CANNOT_FIND_ANY_CARD)
        set CommonStatus = STATUS_USERCANCEL
        goto fatal
    endif        
    
    EndWait

    goto successful

updateparameters =+
    Debug-Output "updateparameters ..."
    set HardParameterKey    = $($R3)
    set NewValueList = {{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}}
    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    CloseRegKey $(KeyParameters)
    goto successful
bindingadapter =+
    Debug-Output "bindingadapter ..."
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal

removeadapter = +
    Debug-Output "EMPCI: removeadapter ..."
;
;       Get the reference count for the adapter
;
   OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\"$(Manufacturer)\$(ProductSoftwareName)"\CurrentVersion"  $(!REG_KEY_ALL_ACCESS) RefCountHandle
   ifstr $(RefCountHandle) == $(KeyNull)
       set RegistryErrorIndex = UNABLE_OPEN_MICROSOFT_KEY
       Debug-Output "EMPCI: Cannot open Adaptec Key"
       goto fatalregistry
   endif
   GetRegValue $(RefCountHandle) "RefCount" RefCountData
   ifint $(!RegLastError) == 0
        set RefCount = *($(RefCountData),4)
   else
        Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "NONFATAL" ,"Unable to get Reference count"
   endif

;
;       Get the inffile associated with this adapter
;
   OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\"$(Manufacturer)\$(ProductSoftwareName)"\CurrentVersion\NetRules"  $(!REG_KEY_ALL_ACCESS) InfNameHandle
   ifstr $(InfNameHandle) == $(KeyNull)
       set RegistryErrorIndex = UNABLE_OPEN_MICROSOFT_KEY
       Debug-Output "Cannot open Adaptec Key"
       goto fatalregistry
   endif
   GetRegValue $(InfNameHandle) "InfName" InfNameData
   ifint $(!RegLastError) == 0
        set InfName = *($(InfNameData),4)
        ifint $(RefCount) == 1
                AddFileToDeleteList $(!STF_WINDOWSSYSPATH)\$(InfName)
        endif
   endif    
   CloseRegKey $(InfNameHandle)



    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    else
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $(!NTN_RegBase)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    ifint $(RefCount) == 1
	AddFileToDeleteList $(!STF_WINDOWSSYSPATH)\drivers\$(DRIVERNAME)
	AddFileToDeleteList $(!STF_WINDOWSSYSPATH)\ADPTSFSA.HLP
    endif
    goto end

UpgradeSoftware = +
     Debug-Output "UpgradeSoftware ..."
     OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
     Ifstr $(KeyProduct) != $(KeyNull)
           Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "ShellCode error"
               goto ShellCodeError
           endif
           set !UG_Filename = $($R0)
           install "Install-Update"
           ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
               goto fatal
           endif
           SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
           SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
           CloseRegKey $(KeyProduct)
     else
           goto fatalregistry
     endif
     goto end
successful = +
    Debug-Output "successful ..."
    goto end
abandon = +
    Debug-Output "abandon ..."
    ForListDo $(OEM_ABANDON_OPTIONS)
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $($)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    EndForListDo
    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), FALSE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto end
warning = +
    Debug-Output "warning ..."
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
        goto "end"
    endif
nonfatalinfo = +
    Debug-Output "nonfatalinfo ..."
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Debug-Output "nonfatal ..."
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    Debug-Output "nonfatalmsg ..."
    ifstr(i) $(Error) == ""
        Set Severity = NONFATAL
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif
fatalregistry = +
    Debug-Output "fatalregistry ..."
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fatal = +
    Debug-Output "fatal ..."
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    Debug-Output "ShellCodeError ..."
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    Debug-Output "setfailed ..."
    set CommonStatus = STATUS_FAILED
    Debug-Output "OEM_ABANDON_ON="$(OEM_ABANDON_ON)
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto abandon
    endif
    goto end
end = +
    Debug-Output "end ..."
    goto term
term = +
    Debug-Output "term ..."
    Return $(CommonStatus)
[Install-Option]
    Debug-Output "[Install-Option] ..."
    Debug-Output "SelectedDriver="$(DRIVERNAME)
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
        AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    Exit
[Install-Hlp]
   Debug-Output "[Install-Hlp] ..."
   set STF_VITAL = ""
   AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   Exit
[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
   AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   exit

[Source Media Descriptions]
    1  = "Drivers for Microsoft Operating Systems"
[ProductType]
STF_PRODUCT  = Winnt
;STF_PLATFORM = I386
;STF_PLATFORM = Alpha
;STF_PLATFORM = ppc
;STF_PLATFORM = MIPS

[Files-Inf]
1,oemsetup.inf , SIZE=1000, RENAME=$(!UG_Filename)

[Files-ANA6XXXX]
1,$(PATH)$(DRIVERNAME) , SIZE=999, RENAME=$(DRIVERNAME)

[Files-ANA62011TX]
1,$(PATH)$(DRIVERNAME) , SIZE=999, RENAME=$(DRIVERNAME)

[Files-ANA62022]
1,$(PATH)$(DRIVERNAME) , SIZE=999, RENAME=$(DRIVERNAME)

[Files-ANA62044]
1,$(PATH)$(DRIVERNAME) , SIZE=999, RENAME=$(DRIVERNAME)

[Files-ANA69011TX]
1,$(PATH)$(DRIVERNAME) , SIZE=999, RENAME=$(DRIVERNAME)

[Files-Hlp]
1,$(PATH)ADPTSFSA.HLP , SIZE=999, RENAME=ADPTSFSA.HLP

[LanguagesSupported]
    ENG


[OptionsTextENG]
ANA6XXXX	= "Adaptec  DuraLAN Fast Ethernet NIC"
ANA62011TX	= "Adaptec ANA-62011/TX Fast Ethernet NIC"
ANA62022	= "Adaptec ANA-62022 Fast Ethernet NIC"
ANA62044	= "Adaptec ANA-62044 Fast Ethernet NIC"
ANA69011TX	= "Adaptec ANA-69011/TX Fast Ethernet NIC"

[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

ProductSoftwareDescription = "Adaptec DuraLAN Fast Ethernet NIC Driver"

ConnectionList  = ^(ConnectionChoices$(Option), 1)
ConnectionValues = ^(ConnectionChoices$(Option), 2)
NoList  = ^(NoChoices, 1)
NoValues = ^(NoChoices, 2)
ShellCodeErrorTitle     = "Error: "$(Function$(Option)Title)
ShellCodeErrorText      = "Shell Code Error."
CANNOT_FIND_ANY_CARD    = "Network card is not present in the system"
[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

[FileDependentDlgENG]
DlgText = "Choose the proper connection type for the "+
          "network adapter. Select [Help] for a detailed "+
          "description of the available options."
DlgTemplate = "ADAP_PROTO_COMBO"
DlgType = "Combination"
Caption = $(Function$(Option)Title)
Combo1Label = "&Connection Type:"
Combo1List = $(ConnectionList)
Combo1Out  = $(ConnectionValue)
ComboListItemsIn  = {Combo1List}
ComboListItemsOut = {Combo1Out}
EditTextLim = ""
CBOptionsGreyed = {}
MinHelpId = 10
MaxHelpId = 30
HelpContext = $(Help$(Option)Id)

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 1.89