EtherWORKS 3 Univel Driver V1.0 README
======================================
The relevant portions of my Makefile are included to illustrate how the
driver is configured into the kernel. Use the "id" tools, i.e., idinstall
and idbuild. The "System" file contains the variable settings for the
hardware, i.e., Port I/O address (0x300), Shared memory address (0xD0000),
and Irq number (5). These settings will have to be edited to reflect the
actual hardware settings. NOTE: For performance reasons the driver changes
the hardware settings from 32K/64K mode to 2K mode. The driver will issue
a warning when it does this however everything will work properly.
There are two system files you'll need to edit prior to configuring
TCP/IP.
Edit /etc/confnet.d/netdrivers and add the following first line:
lmac_0 inet
Edit /etc/confnet.d/inet/interface and add the following as the last line:
lmac:0::/dev/lmac_0:-trailers::
Once this has been done you can configure TCP/IP by running:
/etc/confnet.d/configure -i
These two files are documented in the "TCP/IP Administration" book that I
received with the Unixware TCP/IP kit.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.