README.TXT 2009-01-19 CDC
Flash BIOS version 3.20 for Satellite M300/M305
-----------------------------------------------------------------------------
This BIOS is applicable to the following models:
Satellite M300-ST3401
Satellite M300-ST3402
Satellite M300-ST3403
Satellite M305-S4835
Satellite M305-S4848
Satellite M305-S4860
Satellite M305-S49052
Satellite M305-S4907
Satellite M305-S4910
Satellite M305-S4915
Satellite M305-S4920
Satellite M305-S49201
Satellite M305-SP4901A
Satellite M305-SP4901C
Satellite M305-SP4901R
Satellite U400-ST3301
Satellite U400-ST3302
Satellite U400-ST6301
Satellite U405-S2856
Satellite U405-S2857
Satellite U405-S2878
Satellite U405-S2882
Satellite U405-S2911
Satellite U405-S2915
Satellite U405-S29151
Satellite U405-S2918
Satellite U405-S2920
Satellite U405-ST550W
Satellite Pro U400-SP2804
Satellite Pro U400-SP2804C
Satellite Pro U400-SP2804R
Satellite Pro U400-SP2908A
Satellite Pro U400-SP2908C
Satellite Pro U400-SP2908R
For purposes of this document, the term "Satellite M300/M305"
is used to generically refer to all of the models listed above.
-------------------------------------------
This archive contains the following files:
-------------------------------------------
README.TXT Installation/usage instructions in ASCII text format
2231d320.exe Self-extracting diskette image of BIOS install diskette
smd8v320_w64.exeWindows-installed BIOS package
LAUNCHER.EXE BIOS Installation Launcher application. The Launcher
displays a Windows dialog from which you can choose a BIOS
installation option appropriate for your system and Windows
version. There are various other files in support of the
BIOS Installation Launcher which are not listed here.
smd8v320_64.iso ISO Image of bootable BIOS Installation CD-ROM
See instructions below regarding the use of this image
********************** CAUTION! *********************************************
*****************************************************************************
During the upgrading of your computers BIOS, if the computer loses power or
fails to complete the process of upgrading the BIOS, the existing BIOS in
the computer may become damaged. Toshiba HIGHLY recommends that the computer
is powered via the AC adapter during the entire BIOS update process.
In the event of a power loss during the BIOS update process, the BIOS Key
Installation Method, described below, can sometimes be used to recover from
the failure. If it does not, you'll need to have your computer serviced by a
Toshiba Authorized Service Provider (ASP). You can select an ASP in your
area at http://pcrepair.toshiba.com
Toshiba also recommends that you disconnect all peripheral devices from your
computer before you perform the BIOS update. Peripheral devices include, but
are not limited to, docking devices (Desk Stations, port replicators), PCMCIA
and CardBus cards, USB and IEEE 1394 devices, printers, scanners, digital
cameras, etc.
On some models, it is not unusual to see a CMOS checksum error when you first
reboot the computer after installing the new BIOS. If you see this message
on your screen, press F1 as instructed. This displays the "TSETUP" screen.
Press <End> to save the CMOS data. You won't see the CMOS checksum error
again.
*****************************************************************************
-------------------------------
BIOS INSTALLATION INSTRUCTIONS
-------------------------------
There are two options for installing this BIOS release:
1) From within Windows NT-based operating systems (Vista, XP, 2000) using
the Windows-based BIOS installer.
2) From the bootable BIOS installation CD-ROM
-----------------------------------------------
1) INSTALLATION FROM WITHIN WINDOWS VISTA/XP/2000
-----------------------------------------------
This release offers the option to install the BIOS directly from within
Windows NT-based operating systems. To do so, simply select the 'Windows
Installation' option from the Launcher menu, and click 'Ok'.
IMPORTANT INFORMATION REGARDING THIS INSTALLATION METHOD
Please close all programs before executing the Windows NT-based installer.
Due to the somewhat increased risk of errors updating the BIOS from within
Windows (as compared to using the boot diskette method), it is HIGHLY
recommended that the computer be connected to AC power via the AC adapter,
and that the power-save mode is set to 'Full Power' or the equivalent while
installing the BIOS.
The Windows NT-based BIOS installer, smd8v320_w64.exe, will install the flash
BIOS when run under Windows NT 4.0, Windows 2000, or Windows XP.
The Windows NT-based installer requires Administrator priveleges on the
target system, and, for Windows 2000/XP, requires that the Toshiba Value-
added Logic Device driver (TVALD, or ACPI common modules) be installed and
working.
Windows 95, 98, and Me are not supported. If executed under Windows 9x/Me,
the Launcher will not offer the option to install from within Windows.
---------------------------------------------------
2) BOOT CD-ROM INSTALLATION METHOD
---------------------------------------------------
If your Toshiba PC is equipped with a bootable CD-ROM device (CD-ROM,
DVD-ROM, DVD-RW, DVD-Multi, etc.), and you have access to a CD writer
(burner, either installed in your Toshiba PC or in another PC), you can create
a bootable BIOS installation CD-ROM using the ISO CD image, smd8v320_64.iso,
provided in this distribution.
If you have CD burning software on your computer, chances are good it has set
itself up as the default handler for ISO CD-ROM images. If this is the case,
the option to create the bootable CD-ROM from the BIOS Launcher, will launch
your CD burning software, ready to burn the ISO image to CD. If your software
hasn't set itself up as the default handler for ISO images, we'll recognize
that fact, and let you know.
Once you create the bootable CD-ROM, simply boot your computer from the
resulting CD. To boot from CD, you can either hold down the "C" key while
you turn your computer on, or you can use HWSetup to change the boot priority
so the CD drive boots before the HDD.
Note 1, if your CD burner supports it, you can use a rewritable CD (CD-RW) disc
to create the bootable BIOS installation CD-ROM. Be sure to erase the
rewritable disc (if it has data on it) before you proceed. Once you are
finished updating your system's DMI values, you can erase and re-use the
rewritable disc.
Note 2, The BIOS Launcher dialog offers the option to install the BIOS from a
bootable diskette. Unfortunately, the BIOS image, and its flash utility are
too big to fit on a diskette. If you make the bootable diskette, and boot
your PC from it, it will look for the BIOS on your CD/DVD drive.
IMPORTANT: Creating the bootable BIOS installation CD requires a specific
set of steps that is unique to each CD authoring application.
You cannot simply copy the ISO image to a blank CD and expect
to be able to boot from it.
-----------------------------------------------------------------------------
Here are brief instructions for creating a CD from the ISO image using widely
available software.
-----------------------------------------------------------------------------
* Roxio Easy CD Creator:
Easy CD Creator 5, bundled with some Toshiba PCs, allows you to initiate
the ISO image to CD burning process by simply double-clicking the .ISO file
in Windows Explorer. Simply browse to the folder into which you downloaded
the ISO image file and double-click to launch Easy CD Creator. Then put a
blank CD-R media in your drive and click on the 'Record' button to begin
creating the CD.
Information about Easy CD Creator is available at http://www.roxio.com
* Nero:
Nero 6 is available for download as a fully-functional demo. Nero can be
used to create a CD from your ISO image using either of the two following
techniques:
o In Nero Burning ROM go to menu option 'Recorder --> Burn Image' and
navigate to the drive/folder containing the ISO image you wish to
burn to CD.
o In Nero Express select the option for 'Disc Image or Saved Project'
to select the ISO image file and burn to CD.
More information about Nero 6 and a downloadable demo is available at
http://www.nero.com
Drag 'n Drop CD:
The Drag 'n Drop CD application bundled with some Toshiba PC models does not
support creating a CD from an ISO image. You'll need to use a different CD
burning application. If Roxio Easy CD Creator (see above) is not on your PC,
one application that can be used with Windows XP is Alex Feinman's free "ISO
Recorder Power Toy". This software allows you to right-click on .iso files and
use Windows XP's built-in CD writing wizard to create CDs from ISO image files.
Information about the ISO Recorder Power Toy is available at
http://isorecorder.alexfeinman.com/isorecorder.htm
Note: Information about non-bundled software is provided "for your
information". Toshiba neither recommends nor supports software that
is not bundled with our computers or purchased from toshibadirect.com.
--------------------------------------
CHANGE HISTORY for Satellite M300/M305
--------------------------------------
Version 3.20 2009-01-13
o Improved: LCD panel flashes one time while booting on PCs that support
LG panels.
o Improved: When the customer sets the BIOS Password in BIOS Setup menu
then shuts down the PC by pressing power button, the BIOS Password is
not set. (BIOS PW should have been set)
o Improved: The BIOS can not be updated by Winflash64.
o Improved: Bluetooth Icon appears when FN+F8 is pressed on PCs that do
not support Bluetooth.
o Improved: The PC hangs when booting while pressing F12 to display the
boot select menu.
o Improved: Pass rate of the Treboot test.
o Updated: Intel Kernel Code r1.100.
o Improved: BIOS Password issue.
o Improved: Windows XP Intel Wireless LAN can not detect Access Points.
o Improved: CRID becomes disabled after a Standby/Resume.
o Improved: Noise can be heard from Fujitsu HDDs after Standby,
Hibernation, or Shut Down.
o Added: Function control for PCs that support WiMax.
o Improved: A CIR device appears in Device manager on computers without
CIR.
o Improved: When the PC is in Standby (Sleep), the computer does not
resume when the battery capacity goes below 5%, and battery capacity
drains to 0%.
o Improved: A modem appears in Device manager on computers without Modems.
o Improved: A TV Device appears when FN+F5 is pressed on computers without
TV-Out (S-Video).
o Updated: Intel Micro Code.
o Improved: Wake On LAN function can not disabled.
o Improved: The computer does not resume from Standby mode when the USB
Mouse or Keyboard is moved even though the USB Wakeup Function is
enabled.
Version 1.40 2008-09-10
o Corrected: Noise that can be heard when a Fujitsu HDD is powered on.
o Changed: Wake-up on LAN/Wireless LAN can be selected in Windows even
though the setting is disabled in BIOS set up, to Wake-up on
LAN/Wireless LAN is set to disabled in Windows when it is disabled in
BIOS set up.
o Corrected: Memory size is incorrect on computers configured with the
Intel 945GM chipset.
o Changed: Internal LCD is fixed/set to be Primary and External CRT is
fixed/set to be Secondary in extended mode, to Internal LCD and External
LCD can be selected as Primary or Secondary.
o Corrected: WLK ((Windows Logo Kit) version 1.2 fails.
o Corrected: The refresh rate on the LCD showed 58MHz, and now shows
60MHz.
o Disabled: Intel Top Swap supported by Intel Chip Set ICH9.
o Updated the HDCP (HD Copy Protection) code.
o Corrected: Western Digital HDD boot issue.
o Changed: BIOS can be updated in battery mode on the previous BIOS, to
BIOS can not be updated on battery mode.
o Corrected: Toshiba Management Console can not be installed.
Version 1.10 2008-07-14
o First production release for these models.
**end**
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.