1. sle0v190.exe Driver
2. platform.ini File Contents

platform.ini Driver File Contents (sle0v190.exe)

;The file is Insydeflash utility configuration file

[Version]
Version=00
;Insydeflash utility will display the value at top 

[FDFile]
FileName=
BackupName=

;FileName    -> Utility always load this file.
;BackupName  -> Utility will backup current BIOS to the file.

[UpdateBlock]
PatchFv=0
FileName=intel.fv
FileOffset=0
FlashSize=0
PhysicalAddress=FFF00000
FvID=945PL-A
IDErrorAction=1

;If user set PatchFv to 1, utility will go update mode.
;If user only need to update some blocks in file, please enter file offset and size
;in here. If flash size is 0, utility will update all binary in file.
;If flag in Platform_Check section is 1, utility will compare FvID with current
;platform ID. When ID comparison failed, user choose result by IDErrorAction.
;1 mean show error message box, 2 mean close utility and reboot/shutdown. 


[Platform_Check]
flag=1
;This flag is the switch of comparing bios project id with rom file project id.
;When flag is 1, utility will check project id.If id doesn't match, utility will 
;close the application. When flag is 0, utility won't check project id.  

[AC_Adapter]
flag=1
BatteryCheck=0
BatteryBound=20
;This flag is the switch of checking AC. When flag is 1, utility will check AC. If no AC
;plug in, utility will display warnning message. When flag is 0, utility won't check AC. 

[Bios_Version_Check]
flag=1

;This flag is the switch of checking Bios Version. When flag is 1, utility will 
;check Bios Version. If rom file Version is older than Bios, utility will display warnning 
;message and close application. When flag is 0, utility won't check rom file version. 

[ForceFlash]
ALL=0
BB_PEI=0
CPU_Microcode=0
Variable=1
DXE=0
EC=0
Password=0
OEM_NVS=0
Logo=0
Type#09=0
Type#08=0

[FlashComplete]
Action=2
Dialog=0
Counter=15

;Action  0 -> Do nothing, 1 -> Shut down, 2 -> Reboot
;Dialog  0 -> Do not display dialog, 1 -> Display dialog,
;        2 -> Display dialog and wait several seconds.
;If user need to reboot or shut down automaticlly in several seconds,
;user can set counter be a integer.

[UI]
Confirm=0
Silent=0
DisplayID=0
InsydeInfo=1
VersionInfo=1
GroupInfo=1
ConfirmInfo=0

;Confirm 1 - > Display confirm dialog, 0 -> Do not display confirm dialog
;Silent 1 -> Silent mode, hide main dialog, 0 -> Normal mode
;DisplayID 1 -> Display BIOS ID, 0 -> Do not display BIOS ID
;InsydeInfo 1 -> Display Insyde copyright information and URL, 0 -> Do not display it
;VersionInfo 1 -> Display BIOS version, 0 -> Do not display BIOS version
;GroupInfo 1 -> Display group box, Do not display group box
;ConfirmInfo 1-> Display version and date information in confirm dialog

[Logo]
PatchLogo=0
FileName=
GUID=

[Others]
ClearCMOS=0
FlashDevice=0
DisableCompare=0
ErrorRetry=3
;FlashDevice 0 -> default, 1 -> SPI flash part, 2 -> Non-SPI flash part.
;DisableCompare 0 -> Compare binary, 1 -> Do not compare binary, flash directly in write ROM mode.
;ErrorRetry 0-> Do not retry if found flash error. 1 -> Try to flash again if write or verify error.

[Option]
Flag=0

;Flag 0-> Auto-flash mode.
;Flag 1-> User option mode, including option, start, exit buttons.
;Flag 2-> User flash mode, including start, exit buttons.

[ApplicatonFlash]
Flag=0
Model=

;Some specific platforms need to flash by application. Only support 32bit Windows.
;Flag 1-> Flash by application
;Flag 0-> Flash by BIOS
;Model is the name of the platform.