readme.txt Driver File Contents (qf55v180_w64.exe)

README.TXT                                                    2009-01-23 CDC
Flash BIOS version 1.80 for Qosmio F55
-----------------------------------------------------------------------------

This BIOS is applicable to the following models:

Qosmio F55-Q502
Qosmio F55-Q5021
Qosmio F55-Q503
Qosmio F55-Q504
Qosmio F55-Q5041
Qosmio F55-Q506


For purposes of this document, the term "Qosmio F55"
is used to generically refer to all of the models listed above.


-------------------------------------------
This archive contains the following files:
-------------------------------------------

README.TXT      Installation/usage instructions in ASCII text format
2241d180.exe    Self-extracting diskette image of BIOS install diskette
setup64.exe     Windows-installed BIOS package
LAUNCHER.EXE    BIOS Installation Launcher application. The Launcher
                displays a Windows dialog from which you can choose a BIOS
                installation option appropriate for your system and Windows
                version.  There are various other files in support of the
                BIOS Installation Launcher which are not listed here.
qf55v180_w64.isoISO Image of bootable BIOS Installation CD-ROM
                See instructions below regarding the use of this image


********************** CAUTION! *********************************************
*****************************************************************************

During the upgrading of your computers BIOS, if the computer loses power or
fails to complete the process of upgrading the BIOS, the existing BIOS in
the computer may become damaged.  Toshiba HIGHLY recommends that the computer
is powered via the AC adapter during the entire BIOS update process.

In the event of a power loss during the BIOS update process, the BIOS Key
Installation Method, described below, can sometimes be used to recover from
the failure.  If it does not, you'll need to have your computer serviced by a
Toshiba Authorized Service Provider (ASP).  You can select an ASP in your
area at http://pcrepair.toshiba.com

Toshiba also recommends that you disconnect all peripheral devices from your
computer before you perform the BIOS update.  Peripheral devices include, but
are not limited to, docking devices (Desk Stations, port replicators), PCMCIA
and CardBus cards, USB and IEEE 1394 devices, printers, scanners, digital
cameras, etc.

On some models, it is not unusual to see a CMOS checksum error when you first
reboot the computer after installing the new BIOS.  If you see this message
on your screen, press F1 as instructed.  This displays the "TSETUP" screen.
Press <End> to save the CMOS data.  You won't see the CMOS checksum error
again.

*****************************************************************************


-------------------------------
BIOS INSTALLATION INSTRUCTIONS
-------------------------------

There are two options for installing this BIOS release:

1) From within Windows NT-based operating systems (Vista, XP, 2000) using
   the Windows-based BIOS installer.

2) From the bootable BIOS installation CD-ROM


-----------------------------------------------
1) INSTALLATION FROM WITHIN WINDOWS VISTA/XP/2000
-----------------------------------------------

This release offers the option to install the BIOS directly from within
Windows NT-based operating systems.  To do so, simply select the 'Windows
Installation' option from the Launcher menu, and click 'Ok'.

IMPORTANT INFORMATION REGARDING THIS INSTALLATION METHOD
Please close all programs before executing the Windows NT-based installer.

Due to the somewhat increased risk of errors updating the BIOS from within
Windows (as compared to using the boot diskette method), it is HIGHLY
recommended that the computer be connected to AC power via the AC adapter,
and that the power-save mode is set to 'Full Power' or the equivalent while
installing the BIOS.

The Windows NT-based BIOS installer, setup64.exe, will install the flash
BIOS when run under Windows NT 4.0, Windows 2000, or Windows XP.

The Windows NT-based installer requires Administrator priveleges on the
target system, and, for Windows 2000/XP, requires that the Toshiba Value-
added Logic Device driver (TVALD, or ACPI common modules) be installed and
working.

Windows 95, 98, and Me are not supported.  If executed under Windows 9x/Me,
the Launcher will not offer the option to install from within Windows.

---------------------------------------------------
2) BOOT CD-ROM INSTALLATION METHOD
---------------------------------------------------
If your Toshiba PC is equipped with a bootable CD-ROM device (CD-ROM,
DVD-ROM, DVD-RW, DVD-Multi, etc.), and you have access to a CD writer
(burner, either installed in your Toshiba PC or in another PC), you can create
a bootable BIOS installation CD-ROM using the ISO CD image, qf55v180_w64.iso,
provided in this distribution.

If you have CD burning software on your computer, chances are good it has set
itself up as the default handler for ISO CD-ROM images.  If this is the case,
the option to create the bootable CD-ROM from the BIOS Launcher, will launch
your CD burning software, ready to burn the ISO image to CD.  If your software
hasn't set itself up as the default handler for ISO images, we'll recognize
that fact, and let you know.

Once you create the bootable CD-ROM, simply boot your computer from the
resulting CD.  To boot from CD, you can either hold down the "C" key while
you turn your computer on, or you can use HWSetup to change the boot priority
so the CD drive boots before the HDD.

Note 1, if your CD burner supports it, you can use a rewritable CD (CD-RW) disc
to create the bootable BIOS installation CD-ROM.  Be sure to erase the
rewritable disc (if it has data on it) before you proceed.  Once you are
finished updating your system's DMI values, you can erase and re-use the
rewritable disc.

Note 2, The BIOS Launcher dialog offers the option to install the BIOS from a
bootable diskette.  Unfortunately, the BIOS image, and its flash utility are
too big to fit on a diskette.  If you make the bootable diskette, and boot
your PC from it, it will look for the BIOS on your CD/DVD drive.

IMPORTANT: Creating the bootable BIOS installation CD requires a specific
           set of steps that is unique to each CD authoring application.
           You cannot simply copy the ISO image to a blank CD and expect
           to be able to boot from it.

-----------------------------------------------------------------------------
Here are brief instructions for creating a CD from the ISO image using widely
available software.
-----------------------------------------------------------------------------

* Roxio Easy CD Creator:
  Easy CD Creator 5, bundled with some Toshiba PCs, allows you to initiate
  the ISO image to CD burning process by simply double-clicking the .ISO file
  in Windows Explorer. Simply browse to the folder into which you downloaded
  the ISO image file and double-click to launch Easy CD Creator. Then put a
  blank CD-R media in your drive and click on the 'Record' button to begin
  creating the CD.

  Information about Easy CD Creator is available at http://www.roxio.com


* Nero:
  Nero 6 is available for download as a fully-functional demo. Nero can be
  used to create a CD from your ISO image using either of the two following
  techniques:

	o In Nero Burning ROM go to menu option 'Recorder --> Burn Image' and
	  navigate to the drive/folder containing the ISO image you wish to
	  burn to CD.

	o In Nero Express select the option for 'Disc Image or Saved Project'
	  to select the ISO image file and burn to CD.

More information about Nero 6 and a downloadable demo is available at
http://www.nero.com


Drag 'n Drop CD:
The Drag 'n Drop CD application bundled with some Toshiba PC models does not
support creating a CD from an ISO image.  You'll need to use a different CD
burning application. If Roxio Easy CD Creator (see above) is not on your PC,
one application that can be used with Windows XP is Alex Feinman's free "ISO
Recorder Power Toy". This software allows you to right-click on .iso files and
use Windows XP's built-in CD writing wizard to create CDs from ISO image files.

Information about the ISO Recorder Power Toy is available at
http://isorecorder.alexfeinman.com/isorecorder.htm


Note: Information about non-bundled software is provided "for your
      information".  Toshiba neither recommends nor supports software that
      is not bundled with our computers or purchased from toshibadirect.com.


--------------------------------------
CHANGE HISTORY for Qosmio F55
--------------------------------------

Version 1.80  2009-01-13
   o Updated the JMB380 BIOS porting guide to V1.9 for 1394 FIFO.
   o Fixed: Touchpad HWID issue - Synaptics touchpad driver can be installed
     at Windows Update.

Version 1.60  2008-12-08
   o Fixed: There is no backlight when the TV wakes up the system.

Version 1.50  2008-10-31
   o Made a modification to clear CMOS data when CMOS data is lost, as a
     workaround for a BIOS password auto set issue.
   o Enabled: _DDC method for a Japanese (TV, JPN, Samsung LCD) SKU.
   o Implemented PAVP Lite.
   o Added a fan table for Tj85 and Celeron CPUs.
   o Corrected: System will be woken up by an air conditioner remote
     controller. (Change for JPN models)
   o Added: The Wireless LED will be on under certain conditions when Felica
     is in the system. (When Wireless Antenna ON/OFF switch is on, but BT and
     WL is disabled. If UWB and Felica is in the system, Wireless LED should
     be on.)

Version 1.30  2008-08-21
   o Added an EEPROM solution for CIR detection.
   o Made a change so the DVM setting will depend on system memory.
   o Added an HDMI-CEC function for the HDMI connect state.
   o Modified an LED setting after a BIOS Flash.
   o Made a change so the Wireless indicator LED will stay on when the
     Wireless antenna ON/OFF switch is ON.

Version 1.20  2008-07-22
   o Added an algorithm for fixed EDID workaround activation.
   o Updated the NVIDIA VBIOS for a Samsung LCD workaround.
   o Implemented a BIOS function to support CIR device detection.
   o Made a change so the RTC can wake up the system in AC or DC mode when
     the lid is closed.

Version 1.10  2008-07-08
   o First production BIOS release for this model.



 **end**
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 2.27