README.TXT Driver File Contents (BF86510A.86A.0061.P17.IB.exe)

BIOS Upgrade Instructions 
The temporary directory should contain the following four files: 
README {this file} 
If all these files are not present, try extracting the downloaded 
BIOS file again. 
Upgrading to the Latest BIOS 
1.  Enter BIOS SETUP by pressing F2 repeatedly after booting the 
2.  Write down all settings that are unique to the system. These 
       settings will be needed later to reconfigure the system. 
       Additionally you can highlight the exit menu and choose the 
       'Save Custom Defaults' tab.  Choosing 'Yes' will cause  
       the current BIOS settings to be saved as a custom default 
       setting.  When the CMOS memory is cleared during the BIOS 
       Update, BIOS reads the custom defaults.  If the custom 
       defaults are not saved, the BIOS will read the factory 
       defaults.  Press ESC to exit BIOS. 
3.  After booting the operating system, be sure to verify that you 
       have downloaded the correct BIOS. 
4.  Double click the Run.bat program.  Place a blank floppy in drive 
       a: when instructed.  The Run.bat program will automatically 
       format and create a bootable floppy and copy the BIOS files 
       onto the floppy. 
IMPORTANT Microsoft* WINDOWS* 98 SE users.  After creating the diskette 
you will initially not be able to view the contents of the diskette 
through Windows* Explorer or through the A: drive on the desktop.  
To view the contents you will have to eject the diskette and reinsert.  
Only then will the BIOS files be accessible through Windows* Explorer 
or through the A: drive on the desktop. 
5.  Place the bootable floppy containing the new BIOS into drive 
       a: of the system to be upgraded and boot the system. 
6.  During the BIOS update, you will be given one opportunity to 
       cancel the BIOS update without any changes occurring to 
       your system.  To do this, simply press CTRL+Break when prompted. 
       Do not press CTRL+Break or power down your system at any other 
       time during the BIOS update, this could permanently damage 
       your system. 
7.  When prompted that the BIOS Update is complete, remove the 
       floppy and reboot the system. 
8.  Press F2 repeatedly during post to enter BIOS SETUP.  On the first screen 
       within SETUP, check the BIOS version to ensure that it is 
       the new version. 
9.  If you saved the settings as custom defaults, those settings 
       will automatically appear now.  If the system has unique settings that 
       you did not save by choosing 'Save Custom Defaults, re-enter 
       those settings now. Press F10 to save the values and exit  
Note:  If you need to change the language files, press CTRL+Break when 
prompted and then type Iflash. 
*Third-party marks and brands are the property of their 
 respective owners. 
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.67