*******************************
Adaptec Windows CE Driver v2.12
*******************************
The SlimSCSI Windows CE CD-ROM contains the setup and installation software
you need to run SlimSCSI 1460 on a Windows CE 2.0 or higher devices. With the
diver installed you will be able to run programs from external SCSI hard disk
drives, removable drives and CD-ROMs. It also allows you to connect up to two
SCSI drives (one CD-ROM/CD-R drive and one hard disk or removable drive such as
an Iomega Zip or Jaz drive).
This CD-ROM contains the following files and folders:
readme.txt -- this file
Autorun.inf -- this file contains the name of the startup program on the disc.
setup.exe -- the executable file to install the driver on your
handheld PC
Adpcdfs.ini --|
Setup200.ini --|- setup information files
Setup211.ini --|
Lib Folder -- MS MFC Dlls for Windows CE
CabFiles.200 -- CAB files for Windows CE 2.0 & 2.01
CabFiles.211 -- CAB files for Windows CE 2.10 & 2.11
License.txt -- license file
===================
System Requirements
===================
Desktop or notebook computer:
- Windows NT 4.0 with SP3, Windows 95 or Windows 98 operating system
- Microsoft Windows CE Services 2.0 or above
Handheld PC:
- Windows CE 2.0 or above
======================
Installation Procedure
======================
- Install Microsoft Windows CE Services on the desktop/notebook computer
if it has not been installed.
- Connect your H/PC'S to the desktop/notebook computer, make sure the
communication is established.
- Insert the Setup CD-ROM into the CD-ROM drive of your desktop/notebook
computer.
- The setup program runs automatically when the disc is inserted in the CD-ROM drive,
otherwise click Start/Run, input "D:\setup.exe" (If D:\ is CD-ROM drive) in the box
and then click OK.
- When the Application Manager prompts "Install 'Adaptec Win CE driver 2.12' using
the default application install directory?", click Yes.
- Follow the instructions on the screen to complete the installation.
=========================
Un-installation Procedure
=========================
- Remove the SlimSCSI PC card if it is still in PCMCIA slot
- On your handheld PC, tab on Start button.
- Tab on the Settings, and select Control Panel.
- Double tab on the Remove Programs icon.
- Select the Adaptec Win CE driver v2.12, and tab on Remove.
- Tab on Yes to remove it.
====================
How to browse CD-ROM
====================
- Using Win CE 2.0, double click on Adaptecs CD-ROM Explorer icon on your
H/PC'S system.
- For H/PC'S with Win CE 2.11, Storage Card directory will be created for
your CD-ROM. Use this directory to view and run programs from device.
========================
Tips for Troubleshooting
========================
* If error messages are displayed while installing Win CE driver
- Check the connection between H/PC's and desktop/notebook computer, make sure
you can browse files on the H/PC's from your desktop/notebook computer.
- Check if the processor type is included in the list (next section).
To find out the processor type of your H/PC's, go to Control Panel,
and double tap on the System icon.
* If the installation is successful, but the driver does not work
- Please reset the H/PC's with the PC card inserted.
- Make sure the media is in the drive when you insert the PC card
into PCMCIA slot on H/PC's.
* After suspend and resume, files can not be accessed.
- For H/PC's with Win CE 2.0, tap refresh button or directory in Adaptec CD-ROM
Explorer to get CD-ROM Explorer refreshed.
- For H/PC's with Win CE 2.11, plug out the PC card and plug in again.
==================
Compatibility List
==================
- Adaptec’s Windows CE driver are compatible with the following processors:
1. MIPS R3000 series
2. MIPS R4000 series
3. MIPS R4100 series
4. MIPS R4300 series
5. Hitachi SH3
6. Hitachi SH4
7. ARM ArmStrong SA1100
8. ARM Arm720
==================
Contacting Adaptec
==================
Adaptec Inc.
691 S. Milpitas Blvd.
Milpitas, Ca. 95035
Be sure to check our web site at http://www.adaptec.com for product
updates, and other technical support information.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.