# Note: # Settings for a particular touchsceen can be specified under [COMx] section. # For example: "[COM1]". Such sections must be put after the general settings # (that is, the [COMx] sections should be at the bottom of the EloOptions.txt) # #Should be 0 for Click, 1 for Release and 6 for Mouse Emulation MouseEmulationMode,6 # 1 for showing the tooltray and 0 for otherwise ShowToolTray,1 #Enable,frequency,duration BeeponTouch,1,400,150 #Set value DragDelay,500 # Enable,Logtofile,MsgTime,BmCount,bmScanDelay BeamMonitorEntries,0,0,15,2,20,5 # DisableTouch, 1 to disable touch, 0 to enable touch DisableTouch,0 # Enable,RightClick Delay RightClickOnHold,0,1000 # EdgeAcceleration Enable, acceleration,left%, top%, bottom%, right% EdgeAcceleration,1,3,8,8,10,8 # # Example section for specific touchscreen settings #[COM1] #DisableTouch,1 #Untouch Timeout: default is 10 sec. UntouchTimeout,10Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.