Digital Equipment Corporation NetWare Server and Workstation Driver Installation ================================================== Copyright (C) 1996 Digital Equipment Corporation. All rights reserved. Driver Installation for Novell NetWare OS/2 ODI =============================================== Requirements: ------------- Before you start with the installation process make sure you have the following: a. Digital Driver Diskette b. Novell NetWare OS/2 WORKSTATION SERVICES REQUESTER diskette. c. Novell NetWare OS/2 WORKSTATION OS/2 Utility - 1 d. Novell NetWare OS/2 WORKSTATION OS/2 Utility - 2 e. Novell NetWare OS/2 WORKSTATION OS/2 Utility - 3 Installation Procedure ---------------------- You need this file to acquire network service after installing OS/2 Requester and Utilities. DE305.SYS ---- supported by Digital 1. The directory OS2ODI contains only an OS/2 driver,(DE305.SYS). This driver must be used with the OS/2 requester to establish networking operations. 2. Make sure that the workstation on which you want to install the Requester is a 286 or 386 machine that will run OS/2 or Extended Edition OS/2. Please refer to 'Novell NetWare Requester for OS/2' documentation for a detailed Requester and Utilities installation guide. 3. After installation, copy the DE305.SYS file into the NETWARE subdirectory of your hard disk. 4. Add or replace the DE305.SYS file in the CONFIG.SYS file. Make sure the it comes before the IPX.SYS command line. The following shows the corresponding command sequence: DEVICE=C:\NETWARE\LSL.SYS ; OS/2 Requester supported DEVICE=C:\NETWARE\DDAEMON.SYS ; OS/2 Requester supported DEVICE=C:\NETWARE\DE305.SYS ; Digital supported DEVICE=C:\NETWARE\IPX.SYS ; OS/2 Requester supported 5. Reboot your system to get service of network. Installation note: ------------------ You can bind several frame types to the IPX protocol to support various configurations. Include this in the Link Driver DE305 section of the NET.CFG file. A sample is shown below: Link Driver DE305 frame Ethernet_802.3 frame Ethernet_802.2 frame Ethernet_II frame Ethernet_snap protocol IPX 00 Ethernet_802.3 TRADEMARKS ========== All trademarks or brand names mentioned are trademarks of their respective companies. ==End==Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.