PATHWAY.TXT Driver File Contents (

		  DE305 DIGITAL EtherWORKS ISA Adapter

	 Copyright (C) 1996 by Digital Equipment Corp.
	 All rights reserved.

The drivers named DE305 contained in the NDIS directory
NDIS conform to the Network Driver Interface Specification
(NDIS) defined by Microsoft/3Com.

NDIS Driver Installation on PATHWAY ACCESS
1. Insert your copy of the Pathway Drivers diskette
   into drive A.
2. Install the Pathway Drivers into your PC hard disk
   drive. Type the following, indicating the subdirectory
   where you want to install the program. Then press

	A:\> pwinstal C:

   The pwinstall program automatically installs the driver
   software in a new directory named \PATHWAY in your
   specified drive. Your system will prompt you with
   the following message once the process is complete:

   "The Pathway Drivers have been copied successfully.
    Refer to the documentation to complete driver

3. Insert your Driver Diskette in drive A: and copy the
   NDIS driver to the subdirectory where you want to
   install the Pathway software. Do this by typing
   the following command from DOS:

    A:\> Copy A:\NDIS2\DOS\DE305.DOS C:\PATHWAY

4. Edit the CONFIG.SYS file to contain the
   following command lines:


5. Edit your PROTOCOL.INI file in the C:\PATHWAY
   subdirectory to include the following section:

    DriverName = DE305$

6. Edit your AUTOEXEC.BAT file to include the following
   command lines:

   ndis [-d:#]

   -d	is an optional parameter used for accessing
	a specific module number within the PROTOCOL.INI.
	In your PROTOCOL.INI file, a line enclosed by
	square brackets designates the beginning of a
	new module. Each module is referred to by a
	hexadecimal number. The first module is module
	number one. The second module is module two, and so on.

All trademarks or brand names mentioned are properties of their
respective owners.


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.82