LTMOH App release notes for version 1.7.9.0
-------------------------------------------
Modified version numbering scheme to a 4 number scheme
Embedded a manifest into ltmoh.exe for the OEM Ready program
LTMOH App release notes for version 1.77
----------------------------------------
Fixed MR53733 where the LTMOH application was not functioning under Vista unless it was "Run as Administrator".
LTMOH App release notes for version 1.76A
----------------------------------------
Fixed MR 40877 where the application was crashing after 10 calls. This was an issue reported by system test and
Toshiba Japan
LTMOH App release notes for version 1.76
----------------------------------------
Some modifications to the User Interface so that the Dialog Box buttons "OK" and "Cancel" will
be displayed in different languages.
Added support for SV92PP( Pinball) and U2.
LTMOH App release notes for version 1.75
----------------------------------------
Fixed MRI 18082 where there were junk characters being displayed in the task bar menu
options for non-English language menus.
Added support for Soft modems on 64-bit systems ( AMD64 and X86 64).
Fixed MRI 20085: Added support for HDA modems
Fixed MRI 18682: The reconnect of the data call was not working after a "Place Outgoing Call"
in Ireland ( and probably all other countries that require a HookFlash+Digit to switch calls).
This has been fixed.
LTMOH App release notes for version 1.73
----------------------------------------
Fixed MRI 9210 where there was a truncated string in Japanese MoH settings window.
Fixed MRI 9358: Portuguese MoH call history windows Cancel button is blank.
LTMOH App release notes for version 1.72
----------------------------------------
Fixed MR 7316 where installation of the MOH Application was causing two instances of
agrsm.vxd to be loaded in Win95/Win98. This was causing intermittent crashes and port
open failures. This fix is for SoftModem only
Fixed a bug where the MOH progress dialog box was being incorrectly displayed if an
application moved the toolbar or its own application bar to the top of the screen.
The progress dialog box would get displayed in a higher position of the screen and
would creep up with successive displays and finally go off the screen. This was
noticed while using NetZero
LTMOH App release notes for version 1.71
----------------------------------------
Bug Fixes/Enhancements
Additional options in ltmoh.ini
StealthMode=Y
This setting is for softmodem only. This will cause the MOH application to run
in silent mode ( will not be seen in the system tray) when the Modem is not in
a connected state. It will be seen in the system tray when the Modem is
connected. The MOH application will also be seen in the system tray if
it is executed again and will go back to silent mode on the next disconnect.
AudibleAlert=Y
This setting will cause a default system sound (ding.wav) to be played when
there is an incoming call
Debug=Y
This setting will cause the application to output debug messages. These
messages can be viewed by using a debugger or a debug message viewer
[DIAL_STRINGS]
Ireland=2,1
Italy=2
France=2
Added a new section for default "Dial digit after hookflash strings". This is
to be used to set the default digits based on the TAPI country setting. This
is applicable in some European countries like Ireland,France and Italy where
the setting is universal. The default setting is set only if there is no
previous setting and will not change if the country is changed. This feature
is designed for our soft PCI users in Europe.
Added support so that the MOH application will function if the "Switch User"
option in WinXP is used. This support is for Mars/Soft only.
Fixed some softmodem hookflash timing issues in MOHAPI.DLL for Ireland/France
and Italy.
LTMOH App release notes for version 1.70
----------------------------------------
Bug Fixes/Enhancements
Added support for new sub-languages
Chinese - HongKong, same as Chinese - Taiwan
Chinese - Singapore, same as Chinese - PRC
French - Canada, same as French - France
Portuguese - Brazil, same as Portuguese - Portugal
Fixed a bug in mohapi.dll where the dll would crash if the dial after hookflash digit
string was more than 12 characters.
Added code in mohapi.dll for softmodem so that the softmodem driver is notified
when the application exits, MR 5940
LTMOH App release notes for version 1.69
----------------------------------------
Bug Fix/Enhancements:
Added a new option ProgramEntryPath in LTMOH.INI
ProgramEntryPath- will allow the creation of a user specified entry under start->programs. Only one level of nesting is supported. This flag will be used only if the CreateProgramEntry flag is defined. For example, ProgramEntryPath=Agere Modem will create the MOH program entry under the start->programs->Agere Modem.
Fixes MR5045
Added a new option CheckDisabledFlag=Y in LTMOH.INI
CheckDisabledFlag=Y Setting for softmodem only. This will cause the MOH application to run in silent mode ( will not be seen in the taskbar) if the current modem country does not support MOH (determined by the S599 settings for that country ). This option
requires the version 2.1.22 and above version of the softmodem driver.
Fixes MR 5485
Fixed a bug where the resume from Place Call did not work in some scenarios. This fixes MR 5690.
LTMOH App release notes for version 1.68
----------------------------------------
Bug Fix:
Fixed a bug in Win98 where the application was causing a fatal exception in the
softmodem code when the QuickConnect UI was enabled
LTMOH App release notes for version 1.67
----------------------------------------
Enhancements:
Added a new ModemType=4 in ltmoh.ini. This type is for Mars or Soft. The application will first try to
check for a Mars modem and then try to check for a softmodem. This can be used by OEMs
who support both Mars and Soft and want just one version of the MOH application.
Added FastConnect help for all languages.
Changed the application ICON from the Lucent ring to Agere.
LTMOH App release notes for version 1.66
----------------------------------------
Enhancements:
Added an option in the ltmoh.ini file to control QuickConnect in MARS/SoftModem
QuickConnect=Y ;will display the QC User interface in the MOH property page
QuickConnect=N ;will not display the QC User interface in the MOH property page
The default QC setting for MARS is QC disabled
The default QC setting for Soft is QC enabled
Added an option in ltmoh.ini to create an entry in the StartMenu for the application
CreateProgramEntry=Y ; will create an entry in the StartMenu for the application.
Added support for Venus PCI and fixed some device resource related issues with Venus PCMCIA.
Fixed a bug where the MOH popup window was being hidden by some "Always on Top" programs.
The MOH popup will always be on top.
Incorporated Resource string modifications and help file modifications based on OEM
feedback.
LTMOH App release notes for version 1.65
----------------------------------------
Bug Fixes:
Fixed a bug where if an outgoing call resulted in a MOH denied then the call was
displayed as an incoming call.MR 4272.
Fixed a bug where the MOH application could be run again if it was already running
automatically at startup.MR 4477.
LTMOH App release notes for version 1.64
----------------------------------------
Bug Fixes:
Fixed bug with Japan CallerID display for MARS. MR 2830
Fixed bug with Japan CallerID history display for all modems. MR 4244
Fixed bug where a failure to "Place an outgoing call" was resulting in subsequent
incoming calls were incorrectly labeled as outgoing calls.
New Features:
Added an option in the ltmoh.ini to control QuickConnect in MARS
QuickConnect=Y ;will enable QC
QuickConnect=N ;will disable QC
LTMOH App release notes for version 1.63
----------------------------------------
Bug Fixes:
Fixed bug with Japan CallerID display for SoftModem
Fixed bug with CallerID display in Texas/North Carolina for all modems
Fixed bugs reported by Actiontec for Venus
Modified the Venus filter driver (for NT4/W2K/WXP) to attach to the WDM driver stack.
The driver now uses Read IRPS to access CallerID data and does not access the UART
directly. This fixed issues where CID information was not getting displayed in Venus.
LTMOH App release notes for version 1.62
----------------------------------------
New features:
Support for a logging feature. This feature can be turned on by a flag in the ltmoh.ini file
Logging=Y will turn on logging. This creates a log file called ltmoh.log in the directory from which
ltmoh.exe is executed. The log file contains configuration details and activity details. The log file
will be reset whenever the application is run. The log file is turned off by default.
LTMOH App release notes for version 1.61
----------------------------------------
New features:
Support for PCMCIA Mars and Venus.
The application provides the user with an option to disconnect the data call and answer
the incoming voice call if the modem is connected to a V90 server or if the V92 server
denies a MOH request.
Online help is provided to the user. The help is multi-language and is in HTML format. The
help file is MOHHELP.CHM. This is a compiled HTML file and needs to be in the same
directory as the ltmoh.exe file. This file is automatically copied over when the application
is installed by setup.
Additional language support:
Czech
Danish
Dutch (Netherlands)
Finnish
Greek
Norwegian (Bokmal)
Polish
Portuguese (Portugal)
Russian
Swedish
Turkish
LTMOH App release notes for version 1.60
----------------------------------------
Unified Application for Mars/Venus and SoftModem.
New feature:
Enhancement to Universal MOH. The user can now specify different digits for the call to
be switched from the data to voice and back if required. This feature is used for lines
that requires different DTMF digits to be dialed after the Hookflash to facillitate
switching the call from voice to data and back. The dial strings can be specified as one
string delimited by a comma.
If the user needs to use a sequence of HookFlash + 1 to switch from data to voice and
HookFlash+2 to switch from voice to data, then the dial string will be entered as "1,2".
LTMoh App release notes for version 1.59
----------------------------------------
Added support for additional languages
German
Korean
LTMoh App release notes for version 1.58
----------------------------------------
Note: This version of the application should be used with Mars driver version 8.13 and above.
New features:
Place Voice Call feature. This feature will allow the user to place an outgoing
voice call, while on a V92 connection. This requires the user to have a line with
the three-way calling service. The user selects the "Place Voice Call" option while
connected, there is an option to Place a voice call or to go back to the data call.
On selection of the option to place the voice call, the data call is placed on hold
and the user is prompted to pick up the local phone and to dial the voice call. The
user then switches back to the data call when done with the voice call.
Multi-language support
Languages supported
English
Spanish ( Castillian, Mexican, Modern )
French
Japanese
Chinese ( Simplified, Traditional)
LTMoh App release notes for version 1.57
----------------------------------------
Bug Fixes:
Fixed an issue where the Application was passing a Null buffer to the driver. This could
potentially cause a crash in W2k and NT4
LTMoh App release notes for version 1.55
----------------------------------------
Application:
-----------
New Features:
1. Modifications to the User Interface
Implementation of Universal MOH. This will allow the user to specify digits to be dialed
to enable the call to be switched from the data call to the incoming voice call. These
digits will also be used to switch the call back from voice to data. This feature is
used for lines that requires DTMF digits to be dialed after the Hookflash to
facillitate switching the call from voice to data and back.
Bug Fixes:
Fixed an issue where the "Start Automatically" option was not working as documented.
LTMoh App release notes for version 1.5
----------------------------------------
Application:
-----------
New Features:
1. Modifications to the User Interface
The configuration dialog is one property page.
The configuration fields are:
Enable Call Waiting - Check box
If selected - Call Waiting is enabled
If not selected - Call waiting is disabled and incoming calls are ignored.
Disconnect Call, switch to Voice - Radio button
If enabled - Incoming call is answered and data call is disconnected.
Enable Modem on Hold - Radio Button
If enabled - User is given an option to place the data call on hold and
answer the incoming voice call.
Caller ID - Check box
If selected - Caller ID information for the incoming call is displayed.
Warn before Timeout - Check box
If selected - A warning message is diaplayed before the Modem on Hold
times out
Warning value - Time in seconds, when the warning message is displayed
The Status dialog has been modified
On an incoming call the following information is displayed
The Caller ID information for the call is displayed.
A timer counts down and displays the time the user has to
select his next option.
Options
=======
Answer - The data call is put on hold and the call is switched to the
incoming voice call.
Ignore - The call is ignored and the modem returns to data mode.
On selection of Answer
A timer counts down and displays the time the user has on the voice call.
Options
=======
Resume Data Call - The modem returns to data mode.
2. Configurable detection options
The application can be configured to detect and configure the modem for MOH without
any user interaction. This is done by using an INI file called LTMOH.INI. These are
the options defined in the INI file
SilentEnumeration=Y
SilentEnumeration if selected will cause the app to try and detect the modem and
configure it without any user interaction. The modem detection is done based on
the modem type or modem name.
ModemType=2
ModemType describes the modem that is to be configured. The app will detect and
configure the type of modem as described in the ModemType
1 = Venus; 2 = Mars
ModemName=MicroLink 56K Fun II
ModemName describes the name of the modem that is to be detected and configured.
The app will detect and configure a modem that has the same friendly name as
described in the ModemName field. This field should be used to detect and configure
a modem that does not have our generic modem friendly name,
The application will pop up an modem selection and coniguration box if the INI file
does not exist or if SilentEnumeration=N.
3. Additional Information
Required files for MARS
LTMOH.EXE - Executable file
MOHAPI.DLL - MOH DLL
LTMOH.INI - Configuration file
Required files for VENUS
LTMOH.EXE - Executable file
MOHAPI.DLL - MOH DLL
LTMOH.INI - Configuration file
LTHOOK.VXD - VxD for Win9x/WinME - copy to \windows\system directory
LTSERMON.SYS - SYS file for NT4/W2K - copy to \windows\system32 directory
LTMoh App release notes for version 1.4
----------------------------------------
Application:
------------
New Features:
1. The application has been split up into a User Interface piece (LTMOH.EXE) and an API
DLL (MOHAPI.DLL).
2. The Modem Status window pops up only when some user interaction is required.
3. Uses the Modem's Friendly name to select and detect Venus modems.
LtMoh App release notes for Version 1.3
----------------------------------------
Application:
------------
New Features:
1. Support for both Mars and Venus modems for Win NT, Win 2000, and Win Me;
2. Support for MultiTech external modem.
Known issues:
1. The desktop shortcut link is hard coded in this release as follows:
Win 9x -- c:\windows\system\ltmoh.lnk
Win NT -- c:\winnt\system32\ltmoh.lnk
Win 2000 -- c:\winnt\system32\ltmoh.lnk
Win Me -- c:\windows\system\ltmoh.lnk
If the path of windows system directory is different from the above, the desktop shortcut
needs to be manually created for this release.
2. Uninstall is not equipped for Win NT in this release.
Venus LtHook.VxD and LtSerMon.SYS:
----------------------------------
Modifications:
1. Wait for +PMHR:n only after we make the +PMHR request, which bypass
possible garbage containing +PMHRN:n in DUN/CISCO case.
2. Under NT4/W2K, after call waiting happens, wait longer before flash hook.
Known issues:
1. LtSerMon.sys won't exit before Hyperterm quit. User won't see the
difference though.
LtMoh App release notes for Version 1.2
----------------------------------------
Application:
------------
New Features:
1. Call history log showing last ten incoming calls with date, time, number, and caller ID;
2. Enable/Disable call waiting;
3. Enumerate and display all installed Lucent modems for user to select;
4. Option for automatic launch when machine reboots.
Modifications:
1. Adaptation to the new V.250 AT commands.
Venus LtHook.VxD:
-----------------
Modifications:
VxD was modified to go with new Venus control code, which supports latest TIA TR-30.2 spec.
NOTE: The spec. proposed MOH +P commands to be included in V.250
LtMoh App release notes for Version 1.1
----------------------------------------
Application:
------------
New Features:
1. Save MOH settings to registry on exit and restore settings when app is launched again.
The registry key added is "HKEY_LOCAL_MACHINE\SOFTWARE\Lucent\MOH";
2. Single app supports both Venus and Mars.
3. App saves window positioning
4. OS detection for MARS is implemented
5. Mars & Venus is supported on Win 95,98 and Millenium.
Modifications:
1. Timer drop list expanding.
Known issues:
1. Application will not detect modem properly if both mars and venus are installed in the same system
Venus LtHook.VxD:
-----------------
Fixed problems:
1. ltven.inf
Modified ltven.inf to include uninstall, which removes .lnk, exe and vxd when user removes
"Lucent MOH application". To restore "Lucent MOH Application", user needs to remove modem and
reinstall through ltven.inf again;
2. Improved callerID detection and moh notifications with different applications such as procomm, HT etc.,
LtMoh App release notes for Version 1.0
----------------------------------------
1. Additional files copied
LtHook.vxd ->Trapper vxd copied to windows\system directory
LtMoh.exe ->Modem on Hold application copied to windows\system directory
LtMoh.lnk -> shortcut that is copied to desktop during INF installation.
LtMoh.inf -> Modified generic Lucent inf to copy these additional files and some registry keys.
The shorcut assumes Windows is installed in c:\windows directory.
2. Registry Keys added
HKLM,SOFTWARE\Microsoft\Windows\CurrentVersion\Run,"LTMOH",,"LTMOH.EXE"
This key is added to run the LtMoh application automatically on reboot.
3. Known issues
a. The additional files copied and registry key are not removed automatically when the
modem is removed through device manager. Will be supported in the next release via
Add/Remove programs
b. Enables call waiting by default for MoH feature to work. No user interface to disable this.
c. Looks for Zoom or Lucent in ati3 string to detect Lucent modem.
d. Need to run the application manually after the modem installation. It can be run by double clicking the icon
on the desktop or executing from \windows\system\ltmoh.exe.
e. Supports only VxD platforms.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.