//------------------------ // CæÊ //------------------------ 00000001=Select a printer, then select the function you want to perform. 00000002=Printer 00000090=Default Printer 00000003=Adjust 00000004=The Paper Feed Adjustment allow you to find the optimum adjustment values. 00000005=Print Current Adjustment Values 00000006=Print the current Paper Feed Adjustment and MicroWeave Adjustment values. 00000007=Initialize Adjustment Values 00000008=Reset the adjustment values to the factory defaults. 00000100=Help 00000009=Select Printer... 00000190=Quit 00000180=Exit 00000200=Select a printer. //------------------------ // ²®æÊ //------------------------ 00010002=Media Type 00010090=Paper Source 00010003=Print Quality 00010004=Paper Feed Adjustment 00010005=Set the Paper Feed Adjustment and make sample prints. 00010092=The Paper Feed Adjustment allow you to find the optimum adjustment values corresponding to the paper source and print quality of the selected genuine EPSON media. Make sample prints and save the optimum values. 00010100=Details... 00010103=Close 00010200=Roll Paper 00010201=Paper Tray 00010202=Manual Feed 00010203=Speed 00010204=Quality 00010280=Normal - 360 x 360 dpi 00010281=Normal - 360 x 720 dpi 00010282=Normal - 720 x 360 dpi 00010283=Fine - 720 x 720 dpi 00010284=SuperFine - 1440 x 720 dpi 00010285=SuperPhoto - 2880 x 1440 dpi 00010286=Draft 00010290=Normal - 360dpi 00010291=Fine - 720dpi 00010292=SuperFine - 1440dpi 00010293=SuperPhoto - 2880dpi 00010206=(A4, Super A3 / B) 00010207=(A2 or wider) //------------------------ // PFÚ×ÝèæÊ //------------------------ 00020400=Paper Feed Adjustment Detail 00020000=Test Range (0.01%) 00020001=min 00020002=max 00020003=Sample Prints Points 00020004=Adjustment Value 00020005=Current Value 00020006=Sample Image 00020009=Sample Prints 00020010=Save 00020091=Page Setup : 00020080=Paper Source : 00020102=Browse... 00020600=Standard Image 00020601=User Defined Image //------------------------ // ÝèlóüæÊ //------------------------ 00040004=Explanation of Adjustments 00040005=A: MicroWeave Adjustment: Normal selected 00040006=B: MicroWeave Adjustment: Fine selected 00040007=C: MicroWeave Adjustment: Quality or Super Fine selected 00040008=D: Paper Feed Adjustment: Roll Paper or Manual Feed selected and Normal selected 00040009=E: Paper Feed Adjustment: Paper Tray selected and Normal selected 00040010=F: Paper Feed Adjustment: Roll Paper or Manual Feed selected and Fine selected 00040011=G: Paper Feed Adjustment: Paper Tray selected and Fine selected 00040012=H: Paper Feed Adjustment: Roll Paper or Manual Feed selected and Quality or Super Fine selected 00040013=I: Paper Feed Adjustment: Paper Tray selected and Quality or Super Fine selected 00040014=E: Paper Feed Adjustment: Roll Paper or Manual Feed selected and Fine selected 00040015=F: Paper Feed Adjustment: Roll Paper or Manual Feed selected and Quality or Super Fine selected 00040016=If the value has been changed, an asterisk "*" will be printed. 00040101=Print //------------------------ // Ýèlú»æÊ //------------------------ 00050100=Initialize //------------------------ // xæÊ //------------------------ 00000300=Close all other applications before adjustment.\nDo not turn the power off during adjustment.\nIf power was turned off during adjustment, perform the adjustment again from the beginning.\nDo not send any print jobs from other computers during adjustment. 00000301=OK 00000302=Are you sure you want to quit? 00000305=The necessary file cannot be found. Install the program again. 00000307=The necessary printer driver cannot be found. Install the printer driver. 00000380=EPSON Status Monitor 3 cannot be found. Install EPSON Status Monitor 3. 00000310=Cannot communicate with the selected printer. 00000312=The printer is not ready. 00000314=There is not enough memory to run the program. 00040300=The print command was sent to the printer. 00020300=The settings have been saved to the printer. 00020302=Do you want to replace this setting? 00020305=The settings could not be saved to the printer. 00050300=Printing all the settings is strongly recommended before initialization. Are you sure you want to initialize the settings? 00050303=Initialization complete. 00020307=The specified file cannot be found. Specify another file or select Standard Image. 00020309=The specified file cannot be used to make sample prints. Specify another file or select Standard Image. 00020311=An error occurred while processing the print job. 00020313=The estimated time and number of sheets required for the sample print are listed below. Do you want to make a sample print? 00020314=Estimated Time: 00020315=Number of Sheets: 00020316=Number of Patterns: 00000318=Failed to obtain the information. 00000320=Cannot find the Help files. 00000322=Required Page Setup options are missing. In Print Center, add all of the Page Setup options to the Printer List. 00000324=Required Page Setup options are missing. In Printer Setup Utility, add all of the Page Setup options to the Printer List. 00000326=The driver is not registered in Print Center. 00000328=The driver is not registered in Printer Setup Utility. 00000330=The printer driver has not been installed or the printer driver's port setting is not supported. 00030300=MicroWeave Adjustment cannot be performed with this combination of Media Type and Print Quality settings. //------------------------ // j [ //------------------------ 00000700=File 00000791=About Paper Feed Adjuster... 00000780=Version Information //------------------------ // pÝèæÊ //------------------------ 00070400=Page Setup 00070000=Auto Cut 00070001=Paper Size 00070101=Cancel 00070600=On 00070601=Off //------------------------ // AoEgæÊ //------------------------ //------------------------ // waitæÊ //------------------------ 00090000=Please wait. //------------------------ // óü\¦æÊ //------------------------ 00100000=Printing samples. //------------------------ // [Uè`æt@CIð_CAOiMacpj //------------------------ 00110400=Browse //------------------------ // Tvóüp //------------------------ 00120000=Paper Feed Adjustment ValueDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.