Date Version Note
============+============+=====================================================================================================================
2002.12.09 2.0 1. Modify setup utility and make it more user friendly
2003.01.13 2.02 2. Support 802.1x(EAP-MD5) in windows 98/Me
3. Use icon in system tray to show link state
2003.01.16 2.03 4. Fixed bug only in v2.02
2003.01.20 2.04 5. Fixed registry setting problem in windows 98
2003.01.23 2.05 6. Fixed utility doesn't work after the installation of TI's utility
2003.03.04 2.10 7. Support customization
8. Support TKIP/AES
2003.03.06 2.11 9. Show SSID detail in site survey
2003.03.11 2.12 10.Fix wep key setting error when key contain 'a' to 'f'
2003.03.11 2.13 11.Fix mismatch between "Profile" and default profile after restart utility
2003.03.21 2.14 12.Support full customization
2003.03.26 2.15 13.Fixed memory leakage
2003.03.27 2.16 14.Provide more customization
2003.03.27 2.17 15.Fixed bug in version 2.15 and 2.16
2003.03.28 2.18 16.Add preamble mode selection
2003.04.08 2.19 17.Show signal strength in system tray
2003.04.11 2.20 18.Add reflection of hardware radio off(need update driver)
19.Fix "Advanced Page" open fail in version 2.10~2.19 when use large font
2003.05.16 2.21 20.Fix error occurred during uninstall in some Windows Me system
2003.05.16 2.22 21.Fixed 802.1x client fail in some situation.
2003.05.20 2.23 22.Update library used to v1.70
2003.05.21 2.24 23.Update library used to v1.71
2003.06.09 2.25 24.Update library used to v1.73
25.Fix display error when the length of SSID is 32
26.Remove 802.1x selection
2003.06.10 2.26 27.Support 4 independent WEP key setting
2003.06.11 2.28 28.Fixed page closed when press "ESC" in some situation("Config" and "Advanced Config")
2003.06.17 2.29 29.Update library used to v1.74(Fixed failure in window XP with WPA support)
2003.06.19 2.30 30.Update library used to v1.75(Wait IO request to complete before return)
31.Support ASCII and Passphrase WEP key input
2003.07.04 2.31 32.Fix show wrong error message in ASCII mode
2003.07.04 2.32 32.Show different icon in system tray when key mismatch
2003.07.23 2.33 33.Fixed show wrong icon in system tray after awake from standby or hibernate
2003.07.24 2.34 34.Change icon used in key mismatch
2003.07.30 2.36 35.Remove "Maintenance type" selection during uninstall
2003.08.06 2.37 36.Fixed bluescreen in win9x system when rtl8180 is disabled
2003.09.17 2.38 37.Modified packet driver for 802.1x client(for Win 2k/NT system)
2003.10.15 2.39 38.Fixed: Radio on/off change too fast will cause link failure.
2003.11.03 3.00 39.Rewrite user interface
40.Support multiple card configuration switching
41.Modify profile structure
42.Changeable of channel plan by UI
43.Support software AP mode configuration
44.Disable/enable windows zero config by UI
45.Log driver event(write only)
2003.12.10 3.10 46.Fixed:Blue screen when run HCT with UI installed
47.Disconnect all client in AP mode before turn off radio
48.Fixed:Always show "X" in system tray in AP mode with WEP ON.
2002.12.15 3.12 49.Fixed:Sometimes rtlwake.exe will crash when card is unplugged in win9x.
2003.12.30 3.13 50.Fixed:Show wrong WEP key status in system tray.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.