3Com Corporation EtherDisk Diskette for the EtherLink/MC Adapters System Resources Listed below are commonly used peripherals and their option settings. If any of these peripherals are installed in your computer, check which resources they are using and make sure that the software options on the EtherLink/MC adapters are not set to use the same resources. Other peripherals not mentioned in these lists could also cause conflicts. I/O Base Address Device ---------------- ------ 200 Game I/O adapter 270 LPT2: second parallel port 2F0 COM2: second serial port 320 Fixed disk adapter 370 LPT1: primary parallel port 380 Monochrome display adapter 3C0 Enhanced graphics adapter 3D0 Color graphics adapter Interrupt Level Device --------------- ------ IRQ3 COM2 IRQ4 COM1 IRQ5 LPT2 IRQ7 LPT1 Memory Usage ------------ Address Device C0000-C3FFF EGA BIOS C0000-C8000 Normal VGA area C8000-CBFFF Hard disk adapter BIOS D0000-DFFFF EMS swap area (page frame) (%VER System Resources v3.4a)Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.