Upgrade procedure ----------------- This contains: 1) LOAD3002.FLA - loader version 3.002 2) 6200_V10xxxx.FLA - Version 100B07 base code (compressed and corruption proof) There is a slight risk when flashing the loader. The risk relates to losing power while flashing or flashing a corrupt file. If either of these events happen, you will have to contact technical support for an RMA replacement. You will need to flash the files using the following steps: 1. Power off the controller. 2. Run a terminal program (such as Hyperterm). Connect it to the serial port. 3. After the terminal program is ready, hold down the space bar. 4. While holding the space bar, power on the controller. 5. Wait for the loader menu to appear 6. Choose the Kermit or XMODEM option (Use Kermit for LOAD3002.FLA!) 7. Instruct the terminal program to transfer the appropriate file. After the transfer, the controller will display progress information during the flash process. Then, the controller will re-boot.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.