1. os2pcm.zip Driver
2. AUTODRV2.INI File Contents

AUTODRV2.INI Driver File Contents (os2pcm.zip)

; PCMCIA PC Card INI File for IBM Auto Configurator
;
; -----------------------------------------------------------------------------
; Note 1 - Required Resources
;
;            Port1  Port2  IRQ  Memory1  MemSize1  Memory2  MemSize2  Others
; Modem        *      -     *      -        -         -        -      none
; SDLC         -      -     -      -        -         -        -      none
;
; *: A value for a key word marked by "*" should be described here.
; -: A value for a key word marked by "-" should not be described here.
;
; A "SDLC" card has not been supported by the Auto Configurator yet.
;
; -----------------------------------------------------------------------------
; Note 2 - Card ID
;
; When you use the following, please add a card ID in the "CardID" statement.
;
; [Modem]
; CardID=MD24XC         OMRON Fax/Data Modem card
;        116E2          OKI Modem card 2400
;        118C2          OKI Modem card Fax/Data
;        FC2400         Dr.Neuhaus Mikroelektronik GmbH FURY CARD 2400
;        2460MC         ELSA GmbH MicroLink 2460MC
;
; -----------------------------------------------------------------------------
; Note 3 - Card Option
;
; [(All Card Name)]
; Option=Ignore         Not configure the card
;
; "All Card Name" means Modem, SDLC.
;
; -----------------------------------------------------------------------------
; Note 4 - Co-existence with an enabler supplied with a PC card
;
; If an enabler is supplied with a PC card and you want to utilize its
; function, you must specify the DEVICE statement of that enabler after
; the DEVICE statement of AUTODRV2.SYS in CONFIG.SYS.
;
; (Example)
;
;     DEVICE=C:\...\PCMCIA.SYS                       (the Card Services       )
;     DEVICE=C:\...\COM.SYS                          (the COM driver          )
;     DEVICE=C:\...\AUTODRV2.SYS C:\...\AUTODRV2.INI (the Auto Configurator   )
;     DEVICE=C:\...\xxxxxxxx.SYS                     (another enabler         )
;     DEVICE=C:\...\IBM2SS01.SYS                     (the Socket Services     )
;     DEVICE=C:\...\ICRMU01.SYS                      (the Resource Map Utility)
;

[Auto Configurator Option]
Beep=ON

[Modem]
CardID=MODEM,MD24XC,116E2,118C2,FC2400,2460MC

; Port1     :
; IRQ       : Interrupt Level

;* Port1=3F8,2F8,3E8,2E8,3220,3228,4220,4228,5220,5228
;* IRQ=4,3

Port1=3F8,IRQ=4
Port1=2F8,IRQ=3
Port1=3E8,IRQ=3
Port1=2E8,IRQ=3

[SDLC]
CardID=SDLC
Option=Ignore