[pctcp general] domain = newmedia full-name = mister happy host-name = ast425 time-zone = pst time-zone-offset = 300 use-old-init-scheme = no user = mr [pctcp kernel] host-table=c:\PCTCP\host.tbl authentication-key = 2068-8164-8253 bsd-urgent = no interface = ifcust 0 ip-delay = high ip-precedence = routine ip-precedence-matching = lax ip-reliability = low ip-security = none ip-throughput = low ip-ttl = 64 kernel-int = 0x61 large-packets = 5 loadhigh = no low-window = 0 mtu-discovery = yes multicast = no pktdrv-loopback = yes router-discovery = no serial-number = 1990-1024-4505 small-packets = 5 small-packet-size = 160 tcp-connections = 4 udp-connections = 6 use-emm = no window = 2048 [pctcp ifcust 0] broadcast-address = 255.255.255.255 ip-address = 69.69.69.2 subnet-mask = 255.0.0.0 [pctcp screen] video-card = VESA [pctcp lpr] banner = yes [pctcp idprint printer] mine = no number = 1 timer = 30 when = timeout [pctcp ip-security] basic-classification = unclassified matching = lax [pctcp pd-pctcp] default = ipx [pctcp pd-pctcp ipx] protocol = UDP type-port = 0x8137,213 [pctcp netbios] adapter-number = 0 cache-elements = 10 loadhigh = yes names = 16 ncbs = 20 scope = sessions = 10 [pctcp vmail] ask-overwrite = no indent-reply = " " new-mbox = yes post = yes print-nonprintable = no [pctcp pcmail] max-sync-descs = 0 msglimit = 0 net-time-out = 5 repository-port = 158 [pctcp pop2] max-sync-descs = 0 net-time-out = 5 pop2-port = 109 [pctcp pop3] bboard = no default-mbox = default max-sync-descs = 0 net-time-out = 5 pop3-port = 110 rpop = no xmit = no [pctcp nntp] join-max-msgs = 0 max-sync-descs = 0 net-time-out = 5 nntp-port = 119 [pctcp tn] back-arrow-key = del ftpsrv = off kerberos4-auth = on kerberos4-only = off status = on [pctcp 3270] bell = on ftp-sfe-attr = 0x09,0x04,0x05,0x02,0x03,0x0E,0x0F ftp-sfe-rv-attr = 0x10,0x40,0x50,0x20,0x30,0x60,0x70 light-pen = off model-3/4 = 4 mouse = off yale = on [pctcp vt] 8-bit = off allow-vt220-8-bit = on answerback = FTP bell = on def-em-mode = vt220 wrap-line = off [pctcp host] umask = 644 [pctcp wmsg] beep-on-msg = yes protocol = UDP save-protocol = yes [pctcp serial 0] baud = 2400 hardware-flow-control = on io-addr = 0x03f8 irq = 4 port = 1 [pctcp comscrpt example] dialup = c:\pctcp\dialup.scr hangup = c:\pctcp\hangup.scr swint = 0x60 accm = 0x000A0000 addr-ctrl-field-comp = on local-ip-address = 0.0.0.0 mru = 1500 prot-field-comp = on remote-ip-address = 0.0.0.0 [pctcp time] dst-begins = 97 dst-ends = 305 [pctcp install] bindir = C:\PCTCP configure-driver = yes do-kappconf = yes etcdir = C:\PCTCP kernel-name = ETHDRV.EXE major-version = 2 minor-version = 3 patch-level = 0Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.