1. nx110v.exe Driver
2. PDIPX.TXT File Contents

PDIPX.TXT Driver File Contents (nx110v.exe)

         PCI Fast Ethernet Adapter Packet Driver
                        Installation for IPX SHELL


 Getting Started
 ---------------
    There are two methods for running the IPX SHELL program. They are
    described below.

    METHOD 1:
    ---------
        - If the FETPCI.SYS program is used, the following statement
          must be included in your CONFIG.SYS file:

                DEVICE = FETPCI.SYS [/option] <packet_int_no>

          <packet_int_no> is the software interrupt vector number used
                          by the packet driver program. This can be from
                          96 to 128.

          /d              Delay Initial - The driver program will not
                                          initialize the network interface
                                          card until the packet driver
                                          program is accessed by its upper
                                          layer program.

          /w              The /w parameter is used only in the Windows
                                          environment.

          Please refer to \PKTDRV\README.TXT for the other parameters


        - Modify the content of AUTOEXEC.BAT to add DPDIPX statement:

                >DPDIPX
                >NETX
                ><change to last driver>
                >LOGIN <username>

    METHOD 2:
    ---------
        - If the FETPCI.COM program is used, follow these steps:

        - Execute FETPCI.COM by typing:

                >FETPCI [/option] <packet_int_no>
                >DPDIPX
                >NETX
                ><change to last driver>
                >LOGIN <username>

          <packet_int_no> is the software interrupt vector number used
                          by the packet driver program. This can be
                          from 96 to 128.

          /d              Delay Initial - The driver program will not
                          initialize the network interface card until
                          the packet driver program is accessed by its
                          upper layer program.

          /w              The -w parameter is used only in the Windows
                          environment.

          Please refer to \PKTDRV\README.TXT for the other parameters

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.