PCI Fast Ethernet Adapter Installation for DECnet PATHWORK v4.0 Getting Started --------------- DECnet PathWork provides a NETSET.EXE program for installing NDIS drivers. For information on the usage of this program, please refer to the DECnet installation manual. - Install DECnet PathWork selecting 3Com's Etherlink II card. - Modify your CONFIG.SYS file to include the following lines: device = c:\decnet\ELNKII.SYS to device = c:\decnet\FETPCI.DOS - Modify the following lines in your PROTOCOL.INI file: [ELNKMACII] drivername = ELNKII$ ioaddress = 0x300 interrupt = 3 xmitbufs = 2 [IPX4MAC] : bindings = ELNKMACII : [DATALINK] : bindings = ELNKMACII : to [FETPCI] drivername = FETPCI$ [IPX4MAC] : bindings = FETPCI : [DATALINK] : bindings = FETPCI :Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.