1. 3005C.exe Driver
2. ereg01.ini File Contents

ereg01.ini Driver File Contents (3005C.exe)

; Generated from source version 2.03.04
; Only localize the Entry Values in the Status Dialog Section.
; For example, do not localize "Title=", do localize "Transmission Status"
[General]
DialogFont=MS Sans Serif
DialogFontSize=14

[Status Dialog]
Title=Transmission Status
Text=Status:
Paragraph=This transmission may take up to a minute
Button=Cancel

[Print Dialog]
Title=Printing...
Button=Cancel

; Only localize the Entry Values in the Error Messages Section.
; For example, do not localize "107=", do localize "Dialing the modem."
; Special Note - Do NOT localize the dollar sign "$" or the letter immedialtely following it.
; For example, on the first message, do not localize "$P" but do localize Can't initialize COM"

[Error Messages]
100 = Can't initialize COM$P.
102 = Can't reset COM$P.
104 = Looking for modem on COM$P at $B baud.
106 = Switching to $B baud.
107 = Dialing the modem.
108 = Found a modem on COM$P
109 = Searching CONNECT string for baudrate.
111 = Dial failed!
114 = LogonID = $I Password = $W
115 = Reading the login information.
117 = Sending login verification.
119 = Passwords don't match!
121 = Logging in.
123 = Can't get login verification!
125 = Waiting for login verification.
127 = We received login verification.
200 = Receiving to $F!
201 = Transmitting the registration.
203 = The ASCII protocol is unsupported at this time.
205 = The ZMODEM protocol is unsupported at this time.
207 = The EXT1 protocol is unsupported at this time.
209 = The EXT2 protocol is unsupported at this time.
211 = Unsupported protocol!
213 = Transmitting with the EREG protocol.
215 = Writing receive buffer.
217 = Waiting for a block.
219 = Timeout reading a block.
221 = File reception complete
222 = $S bytes received ($A ACK) ($N NAK)
223 = Bad buffer received!
224 = Partial file: $S bytes received ($A ACK) ($N NAK)
225 = Transmission successful
227 = Transmission failed
301 = We got NO CARRIER from modem.
303 = Hanging up the phone.
305 = Dropping DTR successfully hung up phone.
307 = Sending +++ to modem.
309 = We got an OK from modem.
311 = Phone is hung up.
313 = ERROR - phone is NOT hung up!
401 = Registration successful!
500 = Error opening $F!
501 = Can't find a modem!
502 = Error writing to $F!
503 = Aborting registration.
505 = User NOT logged in!
507=Registration failed!
509=Maximum file size exceeded!