;************************************************************************ ;* ;* Chapter 1. How to use this patch file? ;* ;* This file (RPL.TXT) contains info. that helps you patch ;* 'RPL.ROM'(v1.00) file into your own Boot ROM driver. ;* ;* To generate your custom driver, please follow the steps ;* described below: ;* ;* a). Follow the instructions to edit the message area in each ;* line. Save this file when you finish editing. ;* ( see CHAPTER 2 for more details ! ) ;* ;* !!! NOTE: DO NOT EDIT THE OFFSET AND LENGTH AREA !!! ;* ;* b). Make sure that you have the following files in your working ;* directory: ;* ;* RTPATCH.EXE -------> The patch execution file ;* ROMCKSUM -------> ROM checksum calculate utilty ;* RPL.ROM -------> ROM image file ;* RPL.TXT -------> ROM patch info. file ;* ;* c). After you decide the name for your RPL ROM, ;* simply type: ;* ;* > RTPATCH RPL.ROM RPL.TXT [your ROM] <Enter> ;* ;* !!! NOTE: DO NOT USE THE SAME DRIVER NAME AS THE ORIGINAL ;* DRIVER!!! ;* ;* d). Then, re-check romsum to your own ROM ;* just type: ;* ;* ROMCKSUM -romsize=12k -cksum=7 [your ROM] <ENTER> ;* ;* ;* e). If no error occurs, you should find your custom driver is ;* generated under your working directory. ;* ;* ;* Chapter 2. How to edit this file ? ;* ;* ;* Each line in this file contains a display message info. of the ;* driver. Each line has the same format: ;* ;* <offset> <length> <message> ;* e.g. ;* 1266 28 'Packet driver for RTL8129',0dh,0ah,'$'; ;* ---- -- ---------------------------------------- ;* ;* Do not edit here! | | EOL ;* Put your own message here! | ;* (HEX) (DEC) delimiter ;* ;* ;* ;* *NOTE: DO NOT EDIT THE <offset> AND <length> AREA !!! ;* ;* *NOTE: Anything after comment character ';' will be ignored! ;* ;* *NOTE: Always add ';'(EOL) at end of each line! ;* ;* *NOTE: If delimiter is needed, keep delimiter intact! In this case, ;* leave the '$' as the last byte. ;* ;* *NOTE: 0H can only be added as delimiter! Message after 0H will be lost! ;* ;* *NOTE: Total length of your message should not exceed <length>. ;* ;* *NOTE: If you must use the comment character (;) in your message, ;* put 3bh instead of ';'. Same for ('). ;* ;* *NOTE: Do not exceed 250 characters in each line. ;* ;************************************************************************ ;************************************************************************ ; Put RPL driver name here ;************************************************************************ 518 2 ech,10h; ;Vendor ID 51a 2 69h,81h; ;Device ID 1b42 1 07h 1b43 9 'RTGBODI',0h 2539 8 'RTGBODI' 78d 20 'Realtek Corporation',0h 7a1 12 'Realtek RPL',0h 17cd 48 'Realtek RTL8169S/RTL8110S Gigabit RPL BootROM',0dh,0ah,0h 1895 33 'Realtek Bootstrap selection menu',0h 1b0e 52 32h,'Realtek RTL8169/8110 Family Gigabit Ethernet ',0h; 249f 142 'Realtek RTL8169/8110 Family Gigabit Ethernet MLID v1.04 (07-18-03) ',0dh,0ah,'(c) Copyright 2003, by Realtek Semiconductor Corp. All rights reserved.',0h;Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.