IC Plus IP1000 Family Gigabit Ethernet Adapter
Windows NDIS driver
Contents:
---------
1. File Description
2. Driver Installation for Windows XP
3. Parameters Description
1. File Description
-------------------
Filename Description
================= =====================================================
README.TXT Presents a summary of the contents for Windows NDIS
driver installation.
NETIPGD.INF Windows installation INFormation file for install
IPGDND51.SYS Windows XP NDIS 5.1 driver
2. Driver Installation for Windows XP
------------------------------------------------
The Windows installation floppy or CD is needed to complete this
installation.
Adapter Installation Procedure
--------------------------------------------
a. Make sure your computer is power-off.
b. Plug the adapter into one PCI 33MHz slot of your computer.
c. Turn on the power.
Install and/or Update driver from diskette
------------------------------------------
The following steps can help you install or update the driver to
the one in the Adapter Drivers Diskette/CD-ROM.
a. Open Control Panel, double click "System" icon to open System
Properties.
b. In the "Hardware" sheet, you can see the "Device Manager" button.
Click to open Device Manager.
c. Use the tool bar to make sure you "View" "Devices by type".
Then you will able to find
Ethernet Controller
in "Network Adapters" group. Double click it to open its property.
d. In the "Driver" sheet of the adapter's properties, there is a button
named "Update Driver". Click it, the Upgrade Device Driver Wizard
will show up to help updating the driver.
The following steps will lead you through the wizard ...
a. The first page is the welcome messages, click "Next" to continue.
b. Select "Display a list of the known drivers of this device so that
I can choose a specific driver.", and click "Next".
c. Click "Have Disk".
d. Specify the path.
(A:\ , assume A: is floppy drive)
(D:\ , assume D: is CD drive)
e. Choose the driver.
IC Plus IP1000 Family Gigabit Ethernet Adapter
Click "Next" to continue.
f. The wizard will be warning you as the driver without digital
signatured if its cat file not present. Click "Continue" to
continue.
g. The wizard will copy and load the driver, then you will see "Finish"
button. Click it and it's done.
3. Parameter Description
------------------------
- Open 'Device Manager' in "My Computer" -> "Control Pannel" ->
"System" Select "Hardware" and click "Device Manager".
Double click "IC Plus IP1000 Family Gigabit Ethernet Adapter", Select
"Advanced" item.
802.1Q/1P VLAN You can enable it for VLAN group.
tagging Default: Disabled
VLAN ID This value will active after 802.1Q/1P VLAN
tagging is enabled.
Default : 2
Connection Type Specify the connection type for the adapter.
Default: Auto-Sense
Flow Control Enabled/Disabled for Transmit/Receive Flow Control.
Default : Enabled
Network Address Set the Ethernet address for your adapter.
It is not recommended to use this.
Default: read address from adapter ROM.
Receive Buffers Set the number of Receive Buffers Descriptors
Default : 128
Transmit BUffers Set the number of Transmit Buffers Descriptors
Default : 128
Checksum Set enable to perform TCP/IP/UDP Checksum Offloading.
Offloading Default : Enabled
Jumbo Frame You can enable this for Jumbo frame support.
Support Default: Disabled
If enaled, jumbo frame length ranges from 1515 to 4087.
(The device or link partner should also support
Jumbo frame for this function to take effect.)
Wake On LAN Enabled/Disabled Wake up from Lan.
LinkSpeed Default : 10MBits
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.