IRDASMC.INF Driver File Contents (FIR_SCMC_5.1.3600.7_XPx86.zip)

;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; File:  IRDASMC.INF
;
; INF to install SmcIrda.Sys NDIS 5.0 Miniport for SMC IrCC
; on Windows 2000 and Windows XP
;
; Copyright 1997 - 2004 SMSC.
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; 12/09/04 (TR)
; Updated for V.5.1.3600.7.
;
; Added support for custom property sheet values.
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; 11/11/04 (TR)
; Updated for V.5.1.3600.6.
;
; FIFO size is now detected on startup.
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; 06/03/03 (JG)
; Updated for V.5.1.3600.4.
;
; Added a new reg key StuffFifo for Ali chipset.
;
; From this version, the PnP IDs are defined as below
; SMCF010 Golden HW with AUTO detect transceriver.
; SMCF01x Intel chipset with specific transceivers.
; SMCF02x SiS/VIA chipset with specific transceivers.
; SMCF030 Reserved.
; SMCF04x Ali chipset with specific transceivers.
;    Where x in PnP IDs is suitable for all cases above
;	x = 0 Auto detect;
;       x = 1 HP / Agilent;
;	x = 2 IBM;
;	x = 3 SHARP;
;	x = 4 VISHAY.
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; 12/11/02 (yo)
; INF only update for V.5.1.3600.3.
;
; SMCF010 is golden HW.
; SMCF020 device has SiS/VIA chipset, adds RxForceDrq reg key.
; SMCF030 forces HP transceiver and gives a user no other choice.
; SMCF031 forces IBM transceiver and gives a user no other choice.
; SMCF032 forces SHARP transceiver and gives a user no other choice.
; SMCF033 forces VISHAY transceiver and gives a user no other choice.
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; yo v3600  3/13/2002
; EVB portion was removed.
; NEC PnP installation was added.
;	Note that both SMC & NEC installation shares services section
;	because multiple services can not have the same binary as 
;	ServiceBinary according to ChkInf tool from DDK.
; Win9x directives (DeviceID, MaxInstance) were removed.
; WinXp directive (NCF_HAS_UI) was added.
; Coinstaller directive was deleted.
; DelFiles section was not used and was deleted.
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;

[version]
CatalogFile=irdasmc.cat
;LayoutFile=layout.inf ; should only use this if installing as part of OS
signature="$Windows NT$"
Class       = Infrared
ClassGUID   = {6bdd1fc5-810f-11d0-BEC7-08002BE2092F}
provider=%strSMC%
DriverVer=12/09/2004, 5.1.3600.7

[DestinationDirs]
DefaultDestDir=12                       ; %windir%\system32\drivers
SysCopyFiles=12

[Manufacturer]
%strSMC%=SMC_IRCC
%strNEC%=NEC_IRCC

[ControlFlags]
ExcludeFromSelect=*SMCF010
ExcludeFromSelect=*SMCF011
ExcludeFromSelect=*SMCF012
ExcludeFromSelect=*SMCF013
ExcludeFromSelect=*SMCF014
ExcludeFromSelect=*SMCF020
ExcludeFromSelect=*SMCF021
ExcludeFromSelect=*SMCF022
ExcludeFromSelect=*SMCF023
ExcludeFromSelect=*SMCF024
ExcludeFromSelect=*SMCF030
ExcludeFromSelect=*SMCF040
ExcludeFromSelect=*SMCF041
ExcludeFromSelect=*SMCF042
ExcludeFromSelect=*SMCF043
ExcludeFromSelect=*SMCF044
ExcludeFromSelect=*NEC9151

[SMC_IRCC]
%*SMCF010.DeviceDesc%=*SMCF010.ndi, *SMCF010
%*SMCF011.DeviceDesc%=*SMCF011.ndi, *SMCF011
%*SMCF012.DeviceDesc%=*SMCF012.ndi, *SMCF012
%*SMCF013.DeviceDesc%=*SMCF013.ndi, *SMCF013
%*SMCF014.DeviceDesc%=*SMCF014.ndi, *SMCF014
%*SMCF020.DeviceDesc%=*SMCF020.ndi, *SMCF020
%*SMCF021.DeviceDesc%=*SMCF021.ndi, *SMCF021
%*SMCF022.DeviceDesc%=*SMCF022.ndi, *SMCF022
%*SMCF023.DeviceDesc%=*SMCF023.ndi, *SMCF023
%*SMCF024.DeviceDesc%=*SMCF024.ndi, *SMCF024
%*SMCF030.DeviceDesc%=*SMCF030.ndi, *SMCF030
%*SMCF040.DeviceDesc%=*SMCF040.ndi, *SMCF040
%*SMCF041.DeviceDesc%=*SMCF041.ndi, *SMCF041
%*SMCF042.DeviceDesc%=*SMCF042.ndi, *SMCF042
%*SMCF043.DeviceDesc%=*SMCF043.ndi, *SMCF043
%*SMCF044.DeviceDesc%=*SMCF044.ndi, *SMCF044

[NEC_IRCC]
%*NEC9151.DeviceDesc%=*NEC9151.ndi, *NEC9151


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;       SMCF0xx Block
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

[*SMCF010.ndi]
DelReg=SMC_DelReg
AddReg=*SMCF0xx.ndi.reg,*SMCF0xx.ndi.param,AUTODETECT.ndi.param
BusType=14              ; ISAPNP Bus
Characteristics = 0x84	; NCF_PHYSICAL, NCF_HAS_UI
CopyFiles=SysCopyFiles
DriverVer=12/09/2004, 5.1.3600.7

[*SMCF011.ndi]
DelReg=SMC_DelReg
AddReg=*SMCF0xx.ndi.reg,*SMCF0xx.ndi.param,*SMCF0x1.ndi.param
BusType=14              ; ISAPNP Bus
Characteristics = 0x84	; NCF_PHYSICAL, NCF_HAS_UI
CopyFiles=SysCopyFiles
DriverVer=12/09/2004, 5.1.3600.7

[*SMCF012.ndi]
DelReg=SMC_DelReg
AddReg=*SMCF0xx.ndi.reg,*SMCF0xx.ndi.param,*SMCF0x2.ndi.param
BusType=14              ; ISAPNP Bus
Characteristics = 0x84	; NCF_PHYSICAL, NCF_HAS_UI
CopyFiles=SysCopyFiles
DriverVer=12/09/2004, 5.1.3600.7

[*SMCF013.ndi]
DelReg=SMC_DelReg
AddReg=*SMCF0xx.ndi.reg,*SMCF0xx.ndi.param,*SMCF0x3.ndi.param
BusType=14              ; ISAPNP Bus
Characteristics = 0x84	; NCF_PHYSICAL, NCF_HAS_UI
CopyFiles=SysCopyFiles
DriverVer=12/09/2004, 5.1.3600.7

[*SMCF014.ndi]
DelReg=SMC_DelReg
AddReg=*SMCF0xx.ndi.reg,*SMCF0xx.ndi.param,*SMCF0x4.ndi.param
BusType=14              ; ISAPNP Bus
Characteristics = 0x84	; NCF_PHYSICAL, NCF_HAS_UI
CopyFiles=SysCopyFiles
DriverVer=12/09/2004, 5.1.3600.7

[*SMCF020.ndi]
DelReg=SMC_DelReg
AddReg=*SMCF0xx.ndi.reg,*SMCF0xx.ndi.param,RxForceDrq.ndi.reg,AUTODETECT.ndi.param
BusType=14              ; ISAPNP Bus
Characteristics = 0x84	; NCF_PHYSICAL, NCF_HAS_UI
CopyFiles=SysCopyFiles
DriverVer=12/09/2004, 5.1.3600.7

[*SMCF021.ndi]
DelReg=SMC_DelReg
AddReg=*SMCF0xx.ndi.reg,*SMCF0xx.ndi.param,RxForceDrq.ndi.reg,*SMCF0x1.ndi.param
BusType=14              ; ISAPNP Bus
Characteristics = 0x84	; NCF_PHYSICAL, NCF_HAS_UI
CopyFiles=SysCopyFiles
DriverVer=12/09/2004, 5.1.3600.7

[*SMCF022.ndi]
DelReg=SMC_DelReg
AddReg=*SMCF0xx.ndi.reg,*SMCF0xx.ndi.param,RxForceDrq.ndi.reg,*SMCF0x2.ndi.param
BusType=14              ; ISAPNP Bus
Characteristics = 0x84	; NCF_PHYSICAL, NCF_HAS_UI
CopyFiles=SysCopyFiles
DriverVer=12/09/2004, 5.1.3600.7

[*SMCF023.ndi]
DelReg=SMC_DelReg
AddReg=*SMCF0xx.ndi.reg,*SMCF0xx.ndi.param,RxForceDrq.ndi.reg,*SMCF0x3.ndi.param
BusType=14              ; ISAPNP Bus
Characteristics = 0x84	; NCF_PHYSICAL, NCF_HAS_UI
CopyFiles=SysCopyFiles
DriverVer=12/09/2004, 5.1.3600.7

[*SMCF024.ndi]
DelReg=SMC_DelReg
AddReg=*SMCF0xx.ndi.reg,*SMCF0xx.ndi.param,RxForceDrq.ndi.reg,*SMCF0x4.ndi.param
BusType=14              ; ISAPNP Bus
Characteristics = 0x84	; NCF_PHYSICAL, NCF_HAS_UI
CopyFiles=SysCopyFiles
DriverVer=12/09/2004, 5.1.3600.7

[*SMCF030.ndi]		; Keep compitable with *SMCF041
DelReg=SMC_DelReg
AddReg=*SMCF0xx.ndi.reg,*SMCF0xx.ndi.param,StuffFifo.ndi.reg,*SMCF0x1.ndi.param
BusType=14              ; ISAPNP Bus
Characteristics = 0x84	; NCF_PHYSICAL, NCF_HAS_UI
CopyFiles=SysCopyFiles
DriverVer=12/09/2004, 5.1.3600.7

[*SMCF040.ndi]
DelReg=SMC_DelReg
AddReg=*SMCF0xx.ndi.reg,*SMCF0xx.ndi.param,StuffFifo.ndi.reg,AUTODETECT.ndi.param
BusType=14              ; ISAPNP Bus
Characteristics = 0x84	; NCF_PHYSICAL, NCF_HAS_UI
CopyFiles=SysCopyFiles
DriverVer=12/09/2004, 5.1.3600.7

[*SMCF041.ndi]
DelReg=SMC_DelReg
AddReg=*SMCF0xx.ndi.reg,*SMCF0xx.ndi.param,StuffFifo.ndi.reg,*SMCF0x1.ndi.param
BusType=14              ; ISAPNP Bus
Characteristics = 0x84	; NCF_PHYSICAL, NCF_HAS_UI
CopyFiles=SysCopyFiles
DriverVer=12/09/2004, 5.1.3600.7

[*SMCF042.ndi]
DelReg=SMC_DelReg
AddReg=*SMCF0xx.ndi.reg,*SMCF0xx.ndi.param,StuffFifo.ndi.reg,*SMCF0x2.ndi.param
BusType=14              ; ISAPNP Bus
Characteristics = 0x84	; NCF_PHYSICAL, NCF_HAS_UI
CopyFiles=SysCopyFiles
DriverVer=12/09/2004, 5.1.3600.7

[*SMCF043.ndi]
DelReg=SMC_DelReg
AddReg=*SMCF0xx.ndi.reg,*SMCF0xx.ndi.param,StuffFifo.ndi.reg,*SMCF0x3.ndi.param
BusType=14              ; ISAPNP Bus
Characteristics = 0x84	; NCF_PHYSICAL, NCF_HAS_UI
CopyFiles=SysCopyFiles
DriverVer=12/09/2004, 5.1.3600.7

[*SMCF044.ndi]
DelReg=SMC_DelReg
AddReg=*SMCF0xx.ndi.reg,*SMCF0xx.ndi.param,StuffFifo.ndi.reg,*SMCF0x4.ndi.param
BusType=14              ; ISAPNP Bus
Characteristics = 0x84	; NCF_PHYSICAL, NCF_HAS_UI
CopyFiles=SysCopyFiles
DriverVer=12/09/2004, 5.1.3600.7


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;       Add Registry Section for Install
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;       SMCF0xx	-- common for all PnP ID
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[*SMCF0xx.ndi.reg]
HKR,Ndi,Service,0,"SMCIRDA"
HKR,Ndi\Interfaces,DefUpper,0,"ndisirda"
HKR,Ndi\Interfaces,UpperRange,0,"ndisirda"
HKR,Ndi\Interfaces,DefLower,0,"nolower"
HKR,Ndi\Interfaces,LowerRange,0,"nolower"
HKR,Ndi,BoardType,0,"3"
HKR,Ndi,RequiredAll,0,"MS_IrDA"

;
; This is the text that shows in the display area at the bottom
; of the Network dialog when this Adapter is selected in the
; scrolling window above.
;
HKR,Ndi,HelpText,,%strSmcIrdaHelp%

[SMC_DelReg]
HKR,,EnumPropPages32


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;       Special section for SMCF02x
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[RxForceDrq.ndi.reg]
;
;    SiS & VIA DMAC Options
;
;	RxForceDrq:    Any TRUE value enables Force Drq when RX is enabled.
;
HKR,,RxForceDrq,0,"1"    ; Only for SiS & VIA chipset.

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;       Special section for SMCF04x
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[StuffFifo.ndi.reg]
;
;    Ali Chipset
;
;	StuffFifo:    Stuff the FIFO using PIO prior to init the DMA.
;
HKR,,StuffFifo,0,"1"    ; Only for Ali chipset.


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;       Parameters Section -- part of AddReg on Install
;       Key values are adjustable on ADVANCED Property Sheet
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;
;   Infrared Transceiver Selection
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;       Do auto detection and give user choice
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[AUTODETECT.ndi.param]
;   If AUTO [default], then driver will auto-detect at initialization,
;   which will produce a single spurious Tx pulse if Agilent/Sharp.
;   This key can be used to prevent this from happening, if desired.
;
HKR,Ndi\params\RxSel,ParamDesc,,%strRXSEL%
HKR,Ndi\params\RxSel,default,,"0"
HKR,Ndi\params\RxSel,type,,enum
HKR,Ndi\params\RxSel\enum,"0",,%strRXSEL_0%
HKR,Ndi\params\RxSel\enum,"1",,%strRXSEL_1%
HKR,Ndi\params\RxSel\enum,"2",,%strRXSEL_2%
HKR,Ndi\params\RxSel\enum,"3",,%strRXSEL_3%
HKR,Ndi\params\RxSel\enum,"4",,%strRXSEL_4%
HKR,,RxSel,,"0" ; For some reason defaults are not being picked up.


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;       Force Agilent
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[*SMCF0x1.ndi.param]
;
;   For SMCF0x1, just add RxSel reg and select Agilent.
;
HKR,,RxSel,,"2" ; force Agilent.

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;       Force IBM
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[*SMCF0x2.ndi.param]
;
;   Infrared Transceiver Selection
;
;   For SMCF0x2, just add RxSel reg and select IBM.
;
HKR,,RxSel,,"1" ; force IBM.

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;       Force SHARP
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[*SMCF0x3.ndi.param]
;
;   For SMCF0x3, just add RxSel reg and select SHARP.
;
HKR,,RxSel,,"3" ; force SHARP.

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;       Force VISHAY
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[*SMCF0x4.ndi.param]
;
;   For SMCF0x4, just add RxSel reg and select VISHAY.
;
HKR,,RxSel,,"4" ; force VISHAY.


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;       SMCF0xx	-- common for all PnP ID
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[*SMCF0xx.ndi.param]
;
;    IrDA Minimum Turnaround Time (value in microseconds)
;
HKR,Ndi\params\MinTurnTime,ParamDesc,,%strIRDATURNTIME%
HKR,Ndi\params\MinTurnTime,default,,"1000"
HKR,Ndi\params\MinTurnTime,type,,enum
HKR,Ndi\params\MinTurnTime\enum,"500",,%strMinTurnTime_500%
HKR,Ndi\params\MinTurnTime\enum,"1000",,%strMinTurnTime_1000%
HKR,Ndi\params\MinTurnTime\enum,"5000",,%strMinTurnTime_5000%
HKR,Ndi\params\MinTurnTime\enum,"10000",,%strMinTurnTime_10000%
HKR,,MinTurnTime,,"1000" ; For some reason defaults are not being picked up.

;
;       Maximum Speed
;
HKR,Ndi\params\MaxSpeed,ParamDesc,,%strMAXSPEED%
HKR,Ndi\params\MaxSpeed,flag,1,20,00,00,00
HKR,Ndi\params\MaxSpeed,default,,"8"
HKR,Ndi\params\MaxSpeed,type,,enum
HKR,Ndi\params\MaxSpeed\enum,"1",,%strMaxSpeed_1%
HKR,Ndi\params\MaxSpeed\enum,"2",,%strMaxSpeed_2%
HKR,Ndi\params\MaxSpeed\enum,"3",,%strMaxSpeed_3%
HKR,Ndi\params\MaxSpeed\enum,"4",,%strMaxSpeed_4%
HKR,Ndi\params\MaxSpeed\enum,"5",,%strMaxSpeed_5%
HKR,Ndi\params\MaxSpeed\enum,"6",,%strMaxSpeed_6%
HKR,Ndi\params\MaxSpeed\enum,"7",,%strMaxSpeed_7%
HKR,Ndi\params\MaxSpeed\enum,"8",,%strMaxSpeed_8%
HKR,,MaxSpeed,,"8" ; For some reason defaults are not being picked up.

;
;    IrDA Speed enables
;
;       bit=1 enables corresponding speed, 1FF is all speeds [default])
;
;       d0 =  2400     d4 =   57600     d8 = 4000000
;       d1 =  9600     d5 =  115200
;       d2 = 19200     d6 =  576000
;       d3 = 38400     d7 = 1152000
;
;       Note:  Miniport will always enable 9600,
;               no matter what this key says
;
HKR,,SpeedEnable,,"1FF" ; For some reason defaults are not being picked up.



;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;       NEC9151 Block
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

[*NEC9151.ndi]
DelReg=NEC_DelReg
AddReg=*NEC9151.ndi.reg,*NEC9151.ndi.param
BusType=14              ; ISAPNP Bus
Characteristics = 0x84	; NCF_PHYSICAL, NCF_HAS_UI
CopyFiles=SysCopyFiles
DriverVer=12/09/2004, 5.1.3600.7	; INF date is newer than binary's


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;       Add Registry Section for Install
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[*NEC9151.ndi.reg]
;HKR,Ndi,Service,0,"NECIRDA"
HKR,Ndi,Service,0,"SMCIRDA"
HKR,Ndi\Interfaces,DefUpper,0,"ndisirda"
HKR,Ndi\Interfaces,UpperRange,0,"ndisirda"
HKR,Ndi\Interfaces,DefLower,0,"nolower"
HKR,Ndi\Interfaces,LowerRange,0,"nolower"
HKR,Ndi,BoardType,0,"3"
HKR,Ndi,RequiredAll,0,"MS_IrDA"

;
; This is the text that shows in the display area at the bottom
; of the Network dialog when this Adapter is selected in the
; scrolling window above.
;
HKR,Ndi,HelpText,,%strNECIrdaHelp%

[NEC_DelReg]
HKR,,EnumPropPages32


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;       Parameters Section -- part of AddReg on Install
;       Key values are adjustable on ADVANCED Property Sheet
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[*NEC9151.ndi.param]
;
;   Infrared Transceiver Selection
;
;   If AUTO [default], then driver will auto-detect at initialization,
;   which will produce a single spurious Tx pulse if Agilent/Sharp.
;   This key can be used to prevent this from happening, if desired.
;
HKR,Ndi\params\RxSel,ParamDesc,,%strRXSEL%
HKR,Ndi\params\RxSel,default,,"0"
HKR,Ndi\params\RxSel,type,,enum
HKR,Ndi\params\RxSel\enum,"0",,%strRXSEL_0%
HKR,Ndi\params\RxSel\enum,"1",,%strRXSEL_1%
HKR,Ndi\params\RxSel\enum,"2",,%strRXSEL_2%
HKR,Ndi\params\RxSel\enum,"3",,%strRXSEL_3%
HKR,Ndi\params\RxSel\enum,"4",,%strRXSEL_4%
HKR,,RxSel,,"0" ; For some reason defaults are not being picked up.

;
;    IrDA Minimum Turnaround Time (value in microseconds)
;
HKR,Ndi\params\MinTurnTime,ParamDesc,,%strIRDATURNTIME%
HKR,Ndi\params\MinTurnTime,default,,"1000"
HKR,Ndi\params\MinTurnTime,type,,enum
HKR,Ndi\params\MinTurnTime\enum,"500",,%strMinTurnTime_500%
HKR,Ndi\params\MinTurnTime\enum,"1000",,%strMinTurnTime_1000%
HKR,Ndi\params\MinTurnTime\enum,"5000",,%strMinTurnTime_5000%
HKR,Ndi\params\MinTurnTime\enum,"10000",,%strMinTurnTime_10000%
HKR,,MinTurnTime,,"1000" ; For some reason defaults are not being picked up.

;
;       Maximum Speed
;
HKR,Ndi\params\MaxSpeed,ParamDesc,,%strMAXSPEED%
HKR,Ndi\params\MaxSpeed,flag,1,20,00,00,00
HKR,Ndi\params\MaxSpeed,default,,"8"
HKR,Ndi\params\MaxSpeed,type,,enum
HKR,Ndi\params\MaxSpeed\enum,"1",,%strMaxSpeed_1%
HKR,Ndi\params\MaxSpeed\enum,"2",,%strMaxSpeed_2%
HKR,Ndi\params\MaxSpeed\enum,"3",,%strMaxSpeed_3%
HKR,Ndi\params\MaxSpeed\enum,"4",,%strMaxSpeed_4%
HKR,Ndi\params\MaxSpeed\enum,"5",,%strMaxSpeed_5%
HKR,Ndi\params\MaxSpeed\enum,"6",,%strMaxSpeed_6%
HKR,Ndi\params\MaxSpeed\enum,"7",,%strMaxSpeed_7%
HKR,Ndi\params\MaxSpeed\enum,"8",,%strMaxSpeed_8%
HKR,,MaxSpeed,,"8" ; For some reason defaults are not being picked up.

;
;    IrDA Speed enables
;
;       bit=1 enables corresponding speed, 1FF is all speeds [default])
;
;       d0 =  2400     d4 =   57600     d8 = 4000000
;       d1 =  9600     d5 =  115200
;       d2 = 19200     d6 =  576000
;       d3 = 38400     d7 = 1152000
;
;       Note:  Miniport will always enable 9600,
;               no matter what this key says
;
HKR,,SpeedEnable,,"1FF" ; For some reason defaults are not being picked up.



;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;       Services Section
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[*SMCF010.ndi.Services]
AddService=SMCIRDA,2,SMCIRDA.AddService, common.EventLog

[*SMCF011.ndi.Services]
AddService=SMCIRDA,2,SMCIRDA.AddService, common.EventLog

[*SMCF012.ndi.Services]
AddService=SMCIRDA,2,SMCIRDA.AddService, common.EventLog

[*SMCF013.ndi.Services]
AddService=SMCIRDA,2,SMCIRDA.AddService, common.EventLog

[*SMCF014.ndi.Services]
AddService=SMCIRDA,2,SMCIRDA.AddService, common.EventLog

[*SMCF020.ndi.Services]
AddService=SMCIRDA,2,SMCIRDA.AddService, common.EventLog

[*SMCF021.ndi.Services]
AddService=SMCIRDA,2,SMCIRDA.AddService, common.EventLog

[*SMCF022.ndi.Services]
AddService=SMCIRDA,2,SMCIRDA.AddService, common.EventLog

[*SMCF023.ndi.Services]
AddService=SMCIRDA,2,SMCIRDA.AddService, common.EventLog

[*SMCF024.ndi.Services]
AddService=SMCIRDA,2,SMCIRDA.AddService, common.EventLog

[*SMCF030.ndi.Services]
AddService=SMCIRDA,2,SMCIRDA.AddService, common.EventLog

[*SMCF040.ndi.Services]
AddService=SMCIRDA,2,SMCIRDA.AddService, common.EventLog

[*SMCF041.ndi.Services]
AddService=SMCIRDA,2,SMCIRDA.AddService, common.EventLog

[*SMCF042.ndi.Services]
AddService=SMCIRDA,2,SMCIRDA.AddService, common.EventLog

[*SMCF043.ndi.Services]
AddService=SMCIRDA,2,SMCIRDA.AddService, common.EventLog

[*SMCF044.ndi.Services]
AddService=SMCIRDA,2,SMCIRDA.AddService, common.EventLog


[*NEC9151.ndi.Services]
AddService=SMCIRDA,2,SMCIRDA.AddService, common.EventLog

[SMCIRDA.AddService]
DisplayName=%*SMCF0xx.ServiceDesc%
ServiceType=1                   ; SERVICE_KERNEL_DRIVER
StartType=3                     ; SERVICE_DEMAND_START
ErrorControl=1                  ; SERVICE_ERROR_NORMAL
ServiceBinary=%12%\smcirda.sys  ; where the driver is
				; Note: the same bin can not be used 
				; in multiple services
LoadOrderGroup=NDIS

[common.EventLog]
AddReg=common.AddEventLog.reg

[common.AddEventLog.reg]
HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\netevent.dll;%%SystemRoot%%\System32\Drivers\SmcIrda.Sys"
HKR,,TypesSupported,0x00010001,7


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;       File/Directory Sections
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[SysCopyFiles]
smcirda.sys,,,2 ; Do not skip file

; SourceDisksNames not required if installing as part of OS
[SourceDisksNames]
;1=%strDiskName%,%fileTagFile%,
1=%strDiskName%,,,

; Specifies the location of each file referencing the 
; [SourceDisksNames] section
[SourceDisksFiles]
smcirda.sys = 1
; smcirda.inf = 1
; irdasmc.cat=1		; required by WHQL in case of Win9x 
			; not to have, required by ChkInf in case of Win2K or later


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;       Localizable Strings
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[strings]
strSMC="SMSC"
*SMCF010.DeviceDesc="SMSC IrCC - Fast Infrared Port"       ; GOLDEN
*SMCF011.DeviceDesc="SMSC IrCC - Fast Infrared Port (1a)"  ; Intel cs + Agilent IR
*SMCF012.DeviceDesc="SMSC IrCC - Fast Infrared Port (1i)"  ; Intel cs + IBM IR
*SMCF013.DeviceDesc="SMSC IrCC - Fast Infrared Port (1s)"  ; Intel cs + SHARP IR
*SMCF014.DeviceDesc="SMSC IrCC - Fast Infrared Port (1v)"  ; Intel cs + Vishay IR
*SMCF020.DeviceDesc="SMSC IrCC - Fast Infrared Port (20)"  ; SiS/VIA cs Auto detect
*SMCF021.DeviceDesc="SMSC IrCC - Fast Infrared Port (2a)"  ; SiS/VIA cs + Agilent IR
*SMCF022.DeviceDesc="SMSC IrCC - Fast Infrared Port (2i)"  ; SiS/VIA cs + IBM IR
*SMCF023.DeviceDesc="SMSC IrCC - Fast Infrared Port (2s)"  ; SiS/VIA cs + SHARP IR
*SMCF024.DeviceDesc="SMSC IrCC - Fast Infrared Port (2v)"  ; SiS/VIA cs + Vishay IR
*SMCF030.DeviceDesc="SMSC IrCC - Fast Infrared Port (Ta)"  ; Reserved
*SMCF040.DeviceDesc="SMSC IrCC - Fast Infrared Port (40)"  ; ALi cs Auto detect
*SMCF041.DeviceDesc="SMSC IrCC - Fast Infrared Port (4a)"  ; ALi cs + Agilent IR
*SMCF042.DeviceDesc="SMSC IrCC - Fast Infrared Port (4i)"  ; ALi cs + IBM IR
*SMCF043.DeviceDesc="SMSC IrCC - Fast Infrared Port (4s)"  ; ALi cs + SHARP IR
*SMCF044.DeviceDesc="SMSC IrCC - Fast Infrared Port (4v)"  ; ALi cs + Vishay IR
*SMCF0xx.ServiceDesc="SMSC IrCC Miniport Device Driver"
strSmcIrdaHelp="The SMSC IrCC Device permits wireless communication with other devices conforming to IrDA standards using invisible infrared light."

strNEC="NEC"
*NEC9151.DeviceDesc="NEC IrCC - Fast Infrared Port"
; *NEC9151.ServiceDesc="NEC IrCC Miniport Device Driver"
strNECIrdaHelp="The NEC IrCC Device permits wireless communication with other devices conforming to IrDA standards using invisible infrared light."

strDiskName="SMSC IR_NDIS"
fileTagFile="SmcIrda.Tag"	; is this still used?

strRXSEL="Infrared Transceiver Type"
strIRDATURNTIME="Min. Turn-Around Time"
strMAXSPEED="Speed Limit"

strRXSEL_0="AUTO [Default]"
strRXSEL_1="IBM / Infineon / Temic"
strRXSEL_2="HP"
strRXSEL_3="Sharp"
strRXSEL_4="VISHAY Telefunken"

strMinTurnTime_500=" 0.5 mS"
strMinTurnTime_1000=" 1.0 mS [Default]"
strMinTurnTime_5000=" 5.0 mS"
strMinTurnTime_10000="10.0 mS"

strMaxSpeed_1="   9.6 kbps"
strMaxSpeed_2="  19.2 kbps"
strMaxSpeed_3="  38.4 kbps"
strMaxSpeed_4="  57.6 kbps"
strMaxSpeed_5=" 115.2 kbps"
strMaxSpeed_6=" 576   kbps"
strMaxSpeed_7="1.152 Mbps"
strMaxSpeed_8="4 Mbps"

V_CLASSNAME="Infrared Adapters"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.44