;**************************************************************** ; PATHWORKS TCP/IP Version 5.0 Init parameters file. * ; File version: X5.0.2 * ;**************************************************************** ; ; TCP/IP local host, applications and database section ; [TCPGLOBAL] UserName=tpollard HostName=ast425 NetFiles=C:\PW\ ; ; Printer setup for LPR ; [LPR] Server = ; The node name of Print server Printer = ; print queue ; ; TCP/IP kernel section. For more advanced TCP/IP kernel parameters, ; please refer to the documentation. ; ; [TCPIP] IPAddress=69.69.69.2 SubnetMask=255.255.255.0 DefaultGW0 = ; first default gateway NetworkType=0 ; 2 = SLIP Snap=NO ; (default = no) TCPMaxSock = 8 ; max tcp connections UDPMaxSock = 5 ; max udp connections TCPWinSize = 3 ; Max receive window in multiple of ; 1024 bytes. WANMaxSegSize = 1448 ; Max Seg Size of TCP/UDP data for WAN BroadcastFlag = 1 ; can be set to 0s or 1s (default = 1s). RtDiscover = no ; yes|no to turn on/off Dynamic Router ; Discovery. Default is off. ; ; The SLIP section. ; [SLIP] CommPort=COM1 Speed=9600 ModemControl = no ; modem hardware flow control ; ; NetBIOS section ; [NETBIOS] NumLocalNames = 16 ; Size of local NetBIOS name table NumRemoteNames = 10 ; Size of remote NetBIOS name table ScopeID = ; Scope ID ; ; Telnet section ; [TELNET] EcmChar = "" ; default to CRTL \ char NSessions = 4 Nretries = 15 ; # of 1 second retry intervals used ; on sending data if send should fail ; due to low resources CommPort = 0 ; determines if low-level BIOS ; reads/writes are supported by ; telnet. (function codes 1 & 2) ; 0 = no low-level support (default) ; 1 = low-level support for COM 1 ; 2 = low-level support for COM 2 ; ; Domain Name Resolver section ; [DNR] Domain=domain ; ljo.dec.com). No default. NameServer0 = ; IP address of first name server to ; query. No default. ; Up to three name server addresses ; can be defined. The last two are ; optional. Heuristics = 0 ; Tells DNR how to look up names. ; Not required. ; 0=Network first, HOSTS. file second. ; 1=HOSTS. first, Network second. ; default is 0. ; ; Simple Network Management section ; [SNMP] SysDescr = ; The full name and version ; ID of the system's hardware type, ; OS type and networking software. ; It can be up to 64 chars. SysContact = ; The contact person for this managed ; node, together with information ; on how to contact this person. ; It can be up to 64 chars. SysName = ; This is the host's fully-qualified ; domain name. It can be up to 64 ; chars. SysLocation = ; The physical location of this host. ; It can be up to 64 chars. SnmpReadCommunity = ; community name for reads (get ; & getnext) SnmpWriteCommunity = ; community name for writes (set)Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.