1. winx86_drv_celerity_266.exe Driver
2. clrtyfca.inf File Contents

clrtyfca.inf Driver File Contents (winx86_drv_celerity_266.exe)

;
; CLRTYFCA.INF
; ATTO Celerity FC StorPort Driver for Windows Server 2003 x86 Edition (special)
; Copyright 2004-2008 ATTO Technology
;

[version]
signature="$Windows NT$"
Class=SCSIAdapter
ClassGUID={4D36E97B-E325-11CE-BFC1-08002BE10318}
Provider=%ATTO%

; For the third level of revision, 'a' (alpha) = 0, 'b' (beta) = 1, final
; = 2.  The fourth level is just the build number in the series, starting
; at 0.  So version 1.10b3 would be 1.10.1.3.

DriverVer=05/11/2009,2.66.2.0
CatalogFile=ClrtyFCa.cat


[Manufacturer]
%ATTO%=ATTO,NTx86.5.2


[ATTO.NTx86.5.2]
%Celerity.DeviceDesc%        = ClrtyFCa_Inst, ATTO_CelerityFC
%CelerityFC41XA.DeviceDesc%  = ClrtyFCa_Inst, PCI\VEN_15BC&DEV_0105&SUBSYS_0030117C

[ATTO]


[ControlFlags]
ExcludeFromSelect = PCI\VEN_15BC&DEV_0105&SUBSYS_0030117C

[ClrtyFCa_Inst]
CopyFiles = ClrtyFCa.Miniport, ClrtyFCa.AttoFC

[ClrtyFCa.Miniport]
ClrtyFCa.sys

[ClrtyFCa.AttoFC]
AttoFC.dll


[ClrtyFCa_Inst.Services]
AddService = ClrtyFCa, %SPSVCINST_ASSOCSERVICE%, ClrtyFCa_Service_Inst, Miniport_EventLog_Inst


[ClrtyFCa_Service_Inst]
ServiceType    = %SERVICE_KERNEL_DRIVER%
StartType      = %SERVICE_BOOT_START%
ErrorControl   = %SERVICE_ERROR_NORMAL%
ServiceBinary  = %12%\ClrtyFCa.sys
LoadOrderGroup = SCSI Miniport
AddReg         = pnpsafe_pci_addreg
AddReg         = bus_type_fibre
AddReg         = ClrtyFCa_Registry_Update

[ClrtyFCa_Registry_Update]
HKLM,SYSTEM\CurrentControlSet\Services\ClrtyFC\Parameters\Device,MaximumSGList,0x00010001,0xFF
HKLM,SYSTEM\CurrentControlSet\Services\ClrtyFC\Parameters\Device,NumberOfRequests,0x00010001,0xE0
HKLM,SYSTEM\CurrentControlSet\Services\ClrtyFC\Parameters\Device,LargeLuns,0x00010001,0x01
HKLM,SYSTEM\CurrentControlSet\Services\ClrtyFC\Parameters\Device,EventLogMask,0x00010003,0x00000000
HKLM,SYSTEM\CurrentControlSet\Services\ClrtyFC\Parameters\Device,MaxXferSize,0x00010003,0x00000000
HKLM,SYSTEM\CurrentControlSet\Services\ClrtyFC\Parameters\Device,DriverParameters,0x00000000,""
HKLM,SYSTEM\CurrentControlSet\Services\Disk,TimeOutValue,0x00010001,0x0A
HKLM,SOFTWARE\SNIA\HBA\com.attotech.expresfc,LibraryFile,0x00000000,"%11%\AttoFC.dll"


;*************************************************************
;These addreg sections should be used when installing services to indicate
;which interface types are safe for PNP and which aren't.  INTERFACE_TYPE
;is defined in NTDDK.H

[pnpsafe_pci_addreg]
HKR, "Parameters\PnpInterface", "5", 0x00010001, 0x00000001


;*************************************************************
;These addreg sections should be used for non-SCSI miniports 
;to indicate what STORAGE_BUS_TYPE they actually do support.

[bus_type_fibre]
HKR, "Parameters", "BusType", 0x00010001, 0x00000006


;*************************************************************
;The EventLog entries are the same for all SCSI miniports.

[Miniport_EventLog_Inst]
AddReg = Miniport_EventLog_AddReg


[Miniport_EventLog_AddReg]
HKR,,EventMessageFile,%REG_EXPAND_SZ%,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\ClrtyFCa.sys"
HKR,,TypesSupported,%REG_DWORD%,7


[DestinationDirs]
DefaultDestDir = 12 ; DIRID_DRIVERS
ClrtyFCa.Miniport = 12
ClrtyFCa.AttoFC   = 11


[SourceDisksFiles]
ClrtyFCa.sys = 1
AttoFC.dll = 1
;ClrtyFCa.cat = 1


[SourceDisksNames]
1 = %ID1%,,


[Strings]
ATTO = "ATTO Technology, Inc."

Celerity.DeviceDesc       = "ATTO Celerity Fibre Channel Adapter"
CelerityFC41XA.DeviceDesc = "ATTO Celerity FC-41XA Fibre Channel Adapter"

ID1 = "ATTO Celerity FC Driver Install Disk"

;*******************************************
;Handy macro substitutions (non-localizable)
SPSVCINST_ASSOCSERVICE = 0x00000002
SERVICE_KERNEL_DRIVER  = 1
SERVICE_BOOT_START     = 0
SERVICE_ERROR_NORMAL   = 1
REG_EXPAND_SZ          = 0x00020000
REG_DWORD              = 0x00010001