**************************************************************************
HEL80/HEL81 BIOS Change Notification 06/29/2006
SYS BIOS : EL80105B.ROM
*EL80105B.ROM Checksum: B682h
*EL80105B.WPH Checksum: F1DEh
Change notification:
1. Default combines 105A EC
2. One new Intel Master Barnd Logo for All combination.
Issue Fixed:
1. Fix Wireless issue after use DMI.exe to update EEPROM.
2. Fix MBID can not display after use DMI.exe to update EEPROM.
3. Fix incorrect ROM size reported in DMI type0.
Function Modified:
1. Add IGD DVMT option in BIOS menu on HGL31 for different customer.
2. Copy 20h byte from OEM String to COMPAT segment for SLP(F000:FF90)
3. Add B154EW01 V6 panel ECID#14h support in HEL8081.
4. Base on Intel OSB SPEC 3.51 to remove all OSB logo except
Intel Master Brand
Other Notices
None
**************************************************************************
HEL80/HEL81 BIOS Change Notification 06/22/2006
SYS BIOS : EL80104B.ROM
*EL80104B.ROM Checksum: 6C20h
*EL80104B.WPH Checksum: A872h
Change notification:
1. Update uCode to support new CPUs(MeRoms and T2700)
Other Notices
None
**************************************************************************
HEL80/HEL81 BIOS Change Notification 06/09/2006
SYS BIOS : EL80103B.ROM
*EL80103B.ROM Checksum: 3CAFh
*EL80103B.WPH Checksum: 7823h
Change notification:
1. Remove 'SystemBeep' option in setup menu.
2. Support Modem ring resume from S4.
3. Support biosedit utility to change LOGO screen.
Other Notices
None
**************************************************************************
HEL80/HEL81 BIOS Change Notification 05/24/2006
SYS BIOS : EL80102B.ROM
*EL80102B.ROM Checksum: 2C92h
*EL80102B.WPH Checksum: 6806h
Change notification:
1. Disable ASPM to fix system hang during POST issue after first build
mother board and power on the 2nd time whose Lan EEPROM is empty.
2. Updated NV's VGA BIOS to Support VGA internal Thermal Sensor.
Other Notices
None
**************************************************************************
HEL80/HEL81 BIOS Change Notification 05/05/2006
SYS BIOS : EL80101B.ROM
For C build units:
*EL80100B.ROM Checksum: 3FA5h
*EL80100B.WPH Checksum: 7B19h
Change notification:
1. Fix Fn+F3 can't switch display back to LCD when unplug CRT cable issue.
2. Reenable memory test, otherwise it may cause RAM error issue.
3. Program Card reader PCI ID and update some PCI IDs table to correct values.
4. Fix system auto-enter S4 after resume from S4 issue.
5. Fix show 'Unknown Project ID' on screen during POST issue.
Other Notices
None
**************************************************************************
HEL80/HEL81 BIOS Change Notification 04/26/2006
SYS BIOS : EL80100B.ROM
For C build units:
*EL80100B.ROM Checksum: 6EB8h
*EL80100B.WPH Checksum: AA2Ch
Change notification:
1. Fix DTS related issues.
2. Hide Build-in LAN option in setup and set always enabled.
3. Remove USB wake capability for HCT.
4. Fix system need power on twice after J1 clear CMOS RAM issue.
Other Notices
None
**************************************************************************
HEL80/HEL81 BIOS Change Notification 04/18/2006
SYS BIOS : EL80025B.ROM
For C build units:
*EL80025B.ROM Checksum: 06D5h
*EL80025B.WPH Checksum: 428Bh
Change notification:
1. Fix HDD password failed issue on PATA platforms.
2. Remove TPM initialize failed message during POST after abnormal power
off when in standby.
3. Fix 1394 EEPROM can't be programmed issue on first SMT mother board.
4. Add Intel work around for NVidia G73M.
5. Update UMA VBIOS.
Other Notices
None
**************************************************************************
HEL80/HEL81 BIOS Change Notification 04/14/2006
SYS BIOS : EL80024B.ROM
For C build units:
*EL80024B.ROM Checksum: 32B7h
*EL80024B.WPH Checksum: 6ED0h
Change notification:
1. Fix Battery only mode can't power up issue.
Other Notices
None
**************************************************************************
HEL80/HEL81 BIOS Change Notification 04/11/2006
SYS BIOS : EL80023B.ROM
For C build units:
*EL80023B.ROM Checksum: 19B3h
*EL80023B.WPH Checksum: 55CCh
Change notification:
1. Fix Battery manufacturer incorrect issue.
2. Remove setup options: Wake up on Lan
3. Remove dvice disable function in boot menu of Setup
4. Do not reboot system after flash BIOS, direct shutdown system like in
51 team.
5. Fix system hang up when transfer files via Lan.
Other Notices
None
**************************************************************************
HEL80/HEL81 BIOS Change Notification 03/30/2006
SYS BIOS : EL80022B.ROM
For C build units:
*EL80022B.ROM Checksum: DA7Dh
*EL80022B.WPH Checksum: 17D1h
Change notification:
1. Update new NVidia VBIOS to reduce POST time for about 12-13 seconds.
2. Add Phoenix logo screen.
3. Update Audio Codec SSID/SSVID
4. Update DTS common codes.
5. Detect USB devices for PE device checking.
6. Write Audio verb table completely
Other Notices
None
**************************************************************************
HEL80/HEL81 BIOS Change Notification 03/16/2006
SYS BIOS : EL80020A.ROM
For C build units:
*EL80020A.ROM Checksum: 739Ch
*EL80020A.WPH Checksum: B0CFh
Change notification:
1. Based on 019B BIOS and combine 020A EC BIOS to support new WLAN/BT H/W
control method.
2. Updated Intel VGA BIOS from 1256 to 1284.
3. Add Intel's workaround for Power Saving Feature Erratum (BUS1.03)
Issues Fixed: (Compared to 014A)
1. Fix LAN can't be shown in boot menu issue
2. Change DMI information 'HEL80' -> 'HEL8X'
3. Update VBIOS to enable adaptive clocking.
4. Fix press F12 during POST miss LAN item in boot device list issue
5. Fix S3 hang up when connect LAN issue. This fix need to update LAN
Driver together.
Other Notices
To support boot on Lan without first boot to PXE LOM, we need to update LAN
EEPROM to use int 18h.
**************************************************************************
HEL80/HEL81 BIOS Change Notification 03/16/2006
SYS BIOS : EL80020B.ROM
For C build units:
*EL80020B.ROM Checksum: 1E01h
*EL80020B.WPH Checksum: 5B34h
Change notification:
1. Based on 019B BIOS and combine 020B EC BIOS to support new WLAN/BT H/W
control method.
2. Updated Intel VGA BIOS from 1256 to 1284.
3. Add Intel's workaround for Power Saving Feature Erratum (BUS1.03)
Issues Fixed:
1. Fix S3 hang up when connect LAN issue. This fix need to update LAN
Driver together.
Other Notices
Since IDE bridge is removed in C build, BIOS will go in two types:
- 0XXA - for units built in B-test and before
- 0XXB - for C-test units
**************************************************************************
HEL80/HEL81 BIOS Change Notification 03/14/2006
SYS BIOS : EL80019B.ROM
For C build units:
*EL80019B.ROM Checksum: C7E1h
*EL80019B.WPH Checksum: 05B9h
Change notification:
1. Based on 018B BIOS and combine 015A.T04 EC BIOS.
Issues Fixed:
Include EC temp. version (015A.T04) to fix bluetooth control issue.
Other Notices
Since IDE bridge is removed in C build, BIOS will go in two types:
- 0XXA - for units built in B-test and before
- 0XXB - for C-test units
**************************************************************************
HEL80/HEL81 BIOS Change Notification 03/13/2006
*SYS BIOS : EL80018B.ROM
For C build units:
*EL80018B.ROM Checksum: 9E9Dh
*EL80018B.WPH Checksum: DC75h
Change notification:
1. Based on 017B BIOS and combine 015A.T03 EC BIOS.
2. Change DMI information 'HEL80' -> 'HEL8X'
3. Update VBIOS to enable adaptive clocking.
Issues Fixed:
1. Fix press F12 during POST miss LAN item in boot device list issue
Other Notices
To support boot on Lan without first boot to PXE LOM, we need to update LAN
EEPROM to use int 18h.
Since IDE bridge is removed in C build, BIOS will go in two types:
- 0XXA - for units built in B-test and before
- 0XXB - for C-test units
**************************************************************************
HEL80/HEL81 BIOS Change Notification 03/11/2006
SYStem BIOS : EL80017B.ROM
For C build units:
*EL80016B.ROM Checksum: 7893h
*EL80016B.WPH Checksum: B66Bh
Notification:
1. Based on 016B BIOS and combine 015A.T03 EC BIOS.
Issues Fixed:
1. Fix can't detect BT/WLAN issue in C build unit.
Other Notices
To support boot on Lan without first boot to PXE LOM, we need to update LAN
EEPROM to use int 18h.
Since IDE bridge is removed in C build, BIOS will go in two types:
- 0XXA - for units built in B-test and before
- 0XXB - for C-test units
**************************************************************************
HEL80/HEL81 BIOS Change Notification 03/11/2006
*SYS BIOS : EL80016B.ROM
For C build units:
*EL80016B.ROM Checksum: 7339h
*EL80016B.WPH Checksum: B111h
Notification:
1. Based on 015B BIOS and combine 015A.T01 EC BIOS.
Issues Fixed:
1. Fix can't detect BT issue in C build unit.
Other Notices
Since IDE bridge is removed in C build, BIOS will go in two types:
- 0XXA - for units built in B-test and before
- 0XXB - for C-test units
**************************************************************************
HEL80/HEL81 BIOS Change Notification 03/11/2006
*SYS BIOS : EL80015B.ROM
For C build units:
*EL80015B.ROM Checksum: C81Ah
*EL80015B.WPH Checksum: 05F2h
Notification:
1. Based on 014B BIOS.
Issues Fixed:
1. Fix LAN can't be shown in boot menu issue
Other Notices
Since IDE bridge is removed in C build, BIOS will go in two types:
- 0XXA - for units built in B-test and before
- 0XXB - for C-test units
**************************************************************************
HEL80/HEL81 BIOS Change Notification 03/10/2006
*SYS BIOS : EL80014A.ROM and EL80014B.ROM
For A,B build units:
EL80014A.ROM Checksum: B7C2h
EL80014A.WPH Checksum: F59Ah
For C build units:
*EL80014B.ROM Checksum: 5113h
*EL80014B.WPH Checksum: 8EEBh
Notification:
1. Based on 013A BIOS.
Issues Fixed:
1. Fix system hang up during POST if connect USB device to left USB port.
2. Fix '! mark in device manager issue. Also the unknown device issue.
Other Notices
Since IDE bridge is removed in C build, BIOS will go in two types:
- 0XXA - for units built in B-test and before
- 0XXB - for C-test units
**************************************************************************
HEL80/HEL81 BIOS Change Notification 03/02/2006
*SYS BIOS : EL80013S.ROM
*EL80013S.ROM Checksum: 1306h
*EL80013S.WPH Checksum: 50BDh
Notification:
1. Based on 012A BIOS.
Issue Fixed:
1. Fix card reader/MMC/MS card can't work issues including the power
management(Sx state) related issues.
2. Fix User password & Superviser password dependency setup issue.
3. Fix 1024x768 mode screen blurred issues. This fix needs to use new
NVidia driver V83.90 in XP.
4. Fix '!' mark appeared in device manager issue.
5. Fix can't power on system in battery only mode issue.
Other Notices
None
**************************************************************************
HEL80/HEL81 BIOS Change Notification 02/24/2006
*SYS BIOS : EL80012S.ROM
*EL80012S.ROM Checksum: 16A1h
*EL80012S.WPH Checksum: 5458h
Notification:
1. Based on 011A(aborted).
Issue Fixed:
1. Support cad reader and new card function.
2. Fix S3 failed issue on HEL80.
3. Fix Audio malfunction.
None
**************************************************************************
HEL80/HEL81 BIOS Change Notification 02/17/2006
*SYS BIOS : EL80011S.ROM
*EL80011S.ROM Checksum: D8AFh
*EL80011S.WPH Checksum: 4FF6h
Notification:
1. Based on 008A(qborted).
2. Enable Spread Spectrum of Clock Gen(SLG8LP465)
3. Change Manufacturer name to COMPAL.
4. Update NVidia VBIOS to enable external Spread spectrum and VRAM SSC.
5. Enable PCIE ports 3-4.
Issue Fixed:
None
Other Notices
1. To reflash BIOS to TC2 kernel codes, the BIOS flash utility need to
upgrade to V1.6.1.9. If want to update back to TC1 based BIOS, you can
use old version of phlash16.exe (V1.4 build 59) as usual.
2. The flash utility phlash16.exe used in Crisis diskette also need to be
updated to new version(1.6.1.9).
**************************************************************************
HEL80/HEL81 BIOS Change Notification 02/06/2006
*SYS BIOS : EL80008S.ROM
*EL80008S.ROM Checksum: D8AFh
*EL80008S.WPH Checksum: 21ACh
Notification:
1. Update BIOS to TC2(Trusted Core Version 2) BIOS kernel code
Issue Fixed:
None
Other Notices
1. To reflash BIOS to TC2 kernel codes, the BIOS flash utility need to
upgrade to V1.6.1.9. If want to update back to TC1 based BIOS, you can
use old version of phlash16.exe (V1.4 build 59) as usual.
2. The flash utility phlash16.exe used in Crisis diskette also need to be
updated to new version(1.6.1.9).
3. Since Crisis diskette is the final fail-safe mechanism, I suggest that
after you are sure the BIOS in the mother board can perform correct
function of boot block codes(can boot directly from Crisis Diskette and
do the BIOS reflash process), please do not update the boot block data
any more, i.e. DO NOT add option '/bbl' when running phlash16.exe under
DOS to update the BIOS. Please add option 'bbl' only when you are told
that the boot block codes was updated for fixing bug or any other
purposes.
4. How to flash BIOS:
a. Combine EC and System BIOS by buildrom utility.
b. Flash BIOS by PHLASH16.EXE.
ex. phlash16 all.rom /x =>flash BIOS w/o bootblock.
ex. phlash16 all.rom /x /bbl =>flash BIOS with bootblock.
5. After your Crisis diskette is ready for saving your BIOS, please follow
below steps to activate the boot block code:
a. asume the power is off now.
b. Press Fn and the 'B' key at the sme time and keep pressing them.
c. Connect AC power and keep pressing both keys.
d. You must not relese your hands until you can see the floppy diskette
is reading data for a while.
e. After one to two minutes, you can re-power up again. at this moment,
the BIOS on the mother board should be already updated to the version
on your Crisis diskette.
**************************************************************************
HEL80/HEL81 BIOS Release Notification 01/11/2006
*SYS BIOS : EL80006S.ROM
*EL80006S.ROM Checksum: B475h
*EL80006S.WPH Checksum: DAADh
Notification:
1. Update Boot Block: NO
Issue Fixed:
Modified:
1. Add Low speed showup in BIOS setup menu CPU speed.
Added:
Previous Fixed:
Known Issue:
Notes: 1. How to flash BIOS:
a. Combine EC and System BIOS by buildrom utility.
b. Flash BIOS by PHLASH16.EXE.
ex. phlash16 all.rom /x =>flash BIOS w/o bootblock.
ex. phlash16 all.rom /x /bbl =>flash BIOS with bootblock.
**************************************************************************
HEL80/HEL81 BIOS Release Notification 01/05/2006
*SYS BIOS : EL80005S.ROM
*EL80005S.ROM Checksum: 78D5h
*EL80005S.WPH Checksum: 9F0Dh
Notification:
1. Update Boot Block: NO
Issue Fixed:
Modified:
1. Currect BIOS setup menu CPU speed.
2. BIOS setup menu: Product Name and Serial Number support.
3. Update HDA Verb table for SPDIF function.
4. Roll back VBIOS to 01FE.(offical VBIOS 3D hang-up).
Added:
Previous Fixed:
Known Issue:
Notes: 1. How to flash BIOS:
a. Combine EC and System BIOS by buildrom utility.
b. Flash BIOS by PHLASH16.EXE.
ex. phlash16 all.rom /x =>flash BIOS w/o bootblock.
ex. phlash16 all.rom /x /bbl =>flash BIOS with bootblock.
**************************************************************************
HEL80/HEL81 BIOS Release Notification 12/28/2005
*SYS BIOS : EL80004S.ROM
*EL80004S.ROM
*Checksum: B6F7h
Notification:
1. Update Boot Block: YES
Issue Fixed:
1. Fix system auto-resume after first time wake on LAN.
2. UUID support in setup menu.
Modified:
1. Update nVidia VBIOS to Ver 5.73.22.04.05 offical release.
2. HDA Verb table update from Realtek.
3. Modify steup menu HDD0 & ODD strings.
4. Correct CPU speed on BIOS setup menu.
5. Implement crisis function.
Added:
Previous Fixed:
Known Issue:
Notes: 1. How to flash BIOS:
a. Combine EC and System BIOS by buildrom utility.
b. Flash BIOS by PHLASH16.EXE.
ex. phlash16 all.rom /x =>flash BIOS w/o bootblock.
ex. phlash16 all.rom /x /bbl =>flash BIOS with bootblock.
**************************************************************************
HEL80/HEL81 BIOS Release Notification 12/21/2005
*SYS BIOS : EL80003S.ROM
*EC BIOS : K11Z003A.ROM
*EL80003A.ROM 1MB Checksum: BED7h
*EL80003A.WPH Flash Checksum: E2C1h
Notification:
1. Update Boot Block: YES
Issue Fixed:
SYS:
EC:
1.> Can not power on(Battery only).
Modified:
EC:
1.> Modify battery parameterV0.2.
Added:
EC:
Previous Fixed:
EC:
Known Issue:
Notes: 1. How to flash BIOS:
a. Combine EC and System BIOS by buildrom utility.
b. Flash BIOS by PHLASH16.EXE.
ex. phlash16 all.rom /x =>flash BIOS w/o bootblock.
ex. phlash16 all.rom /x /bbl =>flash BIOS with bootblock.
**************************************************************************
HEL80/HEL81 BIOS Release Notification 12/14/2005
*SYS BIOS : EL80002S.ROM
*EC BIOS : K11Z002A.ROM
*EL80002A.ROM 1MB Checksum: 2918h
*EL80002A.WPH Flash Checksum: 4D02h
Notification:
1. Update Boot Block: YES
Issue Fixed:
SYS:
1. Board ID implement for POST sign-on identify.
2. Implement 3in1 card reader function.
3. Implement New Card hot-plug function.
EC:
1.Can not power on(Change pin defind from DA chanel to GPIO).
Modified:
EC:
1. Modify for bluetooth function(Killswitch and hotkey).
2. Modify Fn+F1 hotkey for S3.
3. Add EC mute function.
4. Add Userbutton control.
5. Internal pull-high for Userbutton and Progbutton.
6. Add read device name function.
7. Add Sku ID function.
8. Change Crisis hotkey to L-Fn + B.
Added:
EC:
Previous Fixed:
EC:
Known Issue:
Notes: 1. How to flash BIOS:
a. Rename EL80001A.WPH to BIOS.WPH
b. Use EL80FLH.BAT and PHLASH16.EXE for DOS flashing.
c. Use WinPhlash for Windows flashing.
**************************************************************************
HEL80/HEL81 BIOS Release Notification 11/18/2005
*SYS BIOS : EL80001S.ROM
*EC BIOS : K11Z001A.T01
*EL80001A.ROM 1MB Checksum: DA3Ch
*EL80001A.WPH Flash Checksum: 173Ch
Notification:
1. Update Boot Block: YES
Issue Fixed:
SYS:
1. HEL80/HEL81 bring up BIOS.
EC:
Modified:
EC:
Added:
EC:
Previous Fixed:
EC:
Known Issue:
Notes: 1. How to flash BIOS:
a. Rename EL80001A.WPH to BIOS.WPH
b. Use EL80FLH.BAT and PHLASH16.EXE for DOS flashing.
c. Use WinPhlash for Windows flashing.
**************************************************************************
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.