[Tooltips] 1=Switch to the Advanced Scan Mode. 2=Auto Scan: Flatbed Reflective, Color Photo %s1 dpi, Grayscale %s2 dpi, Text %s3 dpi 3=Auto Scan: Positive Film, Color Photo %s1 dpi, Grayscale %s2 dpi, Text %s3 dpi 4=Auto Scan: Negative Film, Color Photo %s1 dpi, Grayscale %s2 dpi, Text %s3 dpi 5=Scanner Information 6=Help 7=Open the Auto Scan Control Panel. 8=Save Settings &&& Exit 9=Scan Source: Flatbed Reflective 10=Scan Source: Positive Film 11=Scan Source: Negative Film 12=Select the color photo scanning resolution. 13=Select the grayscale scanning resolution. 14=Select the text scanning resolution. 15=Select the color photo scanning resolution. 16=Select the grayscale scanning resolution. 17=Select the text scanning resolution. 18=Select the color photo scanning resolution. 19=Select the grayscale scanning resolution. 20=Select the text scanning resolution. 21=Undo 22=Close 23=Web Link 24=Panel Selection 25=Scan Template in Use 26=Select the scan template. 27=Control Panel for User-defined Scan Templates 28=Sound Settings 29=Turn Inverse Off 30=Turn Auto Density Off 31=Detailed Preview 32=Preview 33=Scan 34=Switch to the Auto Scan Mode. 35=Exit 36=Select the panel. 37=Cancel Speedy Scan 38=Currently-selected Panel 39=Select the panel. 40=Save 41=Save as ... 42=Rename ... 43=Delete 44=Cancel Batch Scan 45=Save as a new scan template by using current settings. 46=New scan template name 47=OK 48=Cancel 49=Rename the selected scan template. 50=Original Name 51=New Name 52=OK 53=Calibrate 54=Browse ... 55=Browse ... 56=Trial Play 57=Trial Play 58=Start playing the selected sound file. 59=Start playing the selected sound file. 60=Stop playing the selected sound file. 61=Stop playing the selected sound file. 62=Select the sound file. 63=Select the sound file. 65=Basic Image Settings 66=Scan Source: Flatbed Reflective 67=Scan Source: ADF (Automatic Document Feeder) 68=Scan Source: Positive Film 69=Scan Source: Negative Film 70=Scan Frame Size 71=Scan Mode 72=Resolution 73=Brightness 74=Contrast 75=Open the Sizing Control Panel. 76=Sheet Feeder 77=Select the scan frame size. 78=Select the scan frame size. 79=Select the scan mode. 80=Select the scan mode. 81=Select the scanning resolution. 82=Select the scanning resolution. 83=Add darkness to all colors in your image. 84=Add lightness to all colors in your image. 85=Lower the differences between light and dark colors in your image. 86=Raise the differences between light and dark colors in your image. 87=Image Output Scale 88=Proportionally enlarge the image. 89=Proportionally shrink the image. 90=Image Crop Size 91=Close this Sizing Control Panel. 92=Advanced Image Settings 93=Zoom out 94=Current Zoom Scale 95=Zoom in 96=All Color Channels 97=Red Channel 98=Green Channel 99=Blue Channel 100=Advanced Image Settings: Gamma 101=Default 102=Advanced Image Settings: Tone Map 104=Advanced Image Settings: Color Correction 105=Hue 106=Saturation 107=Lightness 109=Advanced Image Settings: Histogram 110=Highlight 111=Midtone 112=Shadow 113=Highlight 114=Midtone 115=Shadow 117=Advanced Image Settings: Dither &&& Threshold 118=Zoom out 119=Current Scale 120=Zoom in 121=Decrease the threshold value. 122=Increase the threshold value. 123=Automatic Threshold Setting 125=Preference Settings 126=Decrease the RGB value. 127=Increase the RGB value. 128=Magnifying Glass 129=Hand Tool 130=Rotate &&& Mirror 131=Auto Dust Removal 132=Turn Inverse On 133=Turn Auto Crop On 134=Turn Auto Crop Off 135=Turn Auto Density On 136=Activate Speedy Scan 137=Activate Batch Scan 138=Batch Scan Control Panel 139=Unit: Inch 140=Unit: cm 141=Unit: Pixel 142=Unit: Point 143=Display Image Adjustment Tools 144=Hide Image Adjustment Tools 145=Rotate 90° Counter-clockwise 146=Rotate 90° Clockwise 147=No Rotation/Flipping 148=Flip Horizontally 149=Flip Vertically 151=No Image Filter 152=An image filter is applied. 153=Select the image filter 154=Select the image filter. 155=Select the image filter. 157=No Descreen Filter 158=A descreen filter is applied. 159=No Descreen Filter 160=Descreen Filter: Newspaper 161=Descreen Filter: Magazine 162=Descreen Filter: Art Magazine 163=Custom 164=Specify the descreen resolution. 166=Delete this image. 168=Cancel 170=Red Channel 171=Green Channel 172=Blue Channel 173=Automatic Optimal Channel Selection 174=Retry 175=Scan Job 1 176=Scan Job 2 177=Scan Job 3 178=Scan Job 4 179=Scan Job 5 180=Scan Job 6 181=Scan Job 7 182=Scan Job 8 183=Scan Job 9 184=Scan Job 10 185=Scan Job 11 186=Scan Job 12 187=Scan Job 13 188=Scan Job 14 189=Scan Job 15 190=Scan Job 16 191=Scan Job 17 192=Scan Job 18 193=Scan Job 19 194=Scan Job 20 195=Scan Job 21 196=Scan Job 22 197=Scan Job 23 198=Scan Job 24 199=Scan Job 25 200=Scan Job 26 201=Scan Job 27 202=Scan Job 28 203=Scan Job 29 204=Scan Job 30 205=Scan Job 31 206=Scan Job 32 207=Scan Job 33 208=Scan Job 34 209=Scan Job 35 210=Scan Job 36 [Other] 1=Program was unable to use the scanner because it is being used by another application. Please re-scan after the other application has finished. 2=Program was unable to perform the scan because the port your scanner is connected to is in use by other device. 3=Program was unable to allocate enough memory to perform this action. Close other programs and windows and try again. 4=Program was unable to find your scanner. Please disconnect both the scanner cable and power adapter and then reconnect them. Ensure that you have made all the proper connections as instructed in the Quick Guide and User's Guide. If you still experience problems, please consult the troubleshooting section of the User's Guide located on the CD-ROM. 5=Cannot find a document. Please put the document or image in your scanner to begin the scan process. 6=Program was unable to load TWAIN to connect with the application. 7=Text 8=Grayscale 9=Color Photo 10=Optimal 256 Colors 11=Web Photo 12=16-bit Grayscale 13=48-bit Color Photo 14=None 15=Halftone 16=Error Diffusion 17=Remove the Background 18=Threshold 19=X: 20=Y: 21=W: 22=H: 23=Image Size: 24=Resolution: 25=Scan Mode: 26=Custom 27=None 28=Advanced Scan(%1) 29=Auto Scan Control Panel 34=Do not show this message again. 35=(%1 - %2 lpi) 36=Auto Preview at Startup 37=Save Preview Image 38=Color sRGB 39=Always on Top 40=Fast Preview 41=Fast Scan 42=Monitor Calibration 43=In: %1 Out: %2 44=Play music during scanning. 45=Play sound when scanning is completed. 46=The user interface will be switched to the Manual Scan Mode allowing you to tailor your scans by manually making any desired adjustments. Click the [OK] button to continue or the [Cancel] button to abort. 47=Please wait while the scanner module is returning to its home position. 48=Cannot find any image crop! Please re-place the document or image. 49=Bring Crop to Top 50=Push Crop to Bottom 51=Delete This Crop 52=X: %1 Y: %2 W: %3 H: %4 Output Scale: %5\nImage Size: %6 Resolution: %7 53=Scanner Information 54=Scanner Model: 55=TWAIN: 56=F/W Version: 57=Driver Version: 58=Copyright: 59=Please wait while the scanner warms up. 60=Click the [Cancel] button to abort. 61=Please wait while the scanner is being calibrated. 62=Previewing is in progress. Please wait. 63=Click the [Cancel] button to abort. 64=Scanning is in progress. Please wait. (Page %1/%2) 65=Click the [Cancel] button to abort. 66=Scanning is in progress. Please wait. (Page %1) 67=Transferring image data. Please wait. (Page %1/%2) 68=Click the [Cancel] button to abort. 69=Transferring image data. Please wait. (Page %1) 70=This effect appears in the final scanned image only. The preview image is not affected. 71=This effect appears in the final scanned image only. The preview image is not affected. 72=This effect appears in the final scanned image only. The preview image is not affected. 73=Program was unable to find some components of the software. Please re-install your scanner's software. 74=Program was unable to save the scanned image into the target file, probably due to a lack of disk space. 75=The program is not compatible with the current scanner driver. Please contact your dealer to upgrade your driver. 76=TWAIN is already running. 77=Scan Failed! 78=Disk I/O error or Disk full. 79=The application you are using can not accept 48-bit color images. Please choose another scan mode. 80=The application you are using can not accept 16-bit gray images. Please choose another scan mode. 81=Note: To take advantage of an image scanned at 48-bit color, your application must support 48-bit color images. If 48-bit is not supported by your application, the application will display an error message or the 48-bit color image will be displayed using 24 bits, resulting in a bad image. If this happens, it is recommended that you scan the image with the 48-bit color mode disabled. 82=Note: To take advantage of an image scanned at 16-bit grayscale, your application must support 16-bit grayscale images. If 16-bit is not supported by your application, the application will display an error message or the 16-bit grayscale image will be displayed using 8 bits, resulting in a bad image. If this happens, it is recommended that you scan the image with the 16-bit grayscale mode disabled. 83=The Image Output Scale you have changed on this control panel will not be saved after you close this control panel. \n\nAre you sure you want to close this control panel? 84=Rotate && Mirror 85=Rename (Scan Template) 86=Scan Template Control 87=Save As (Scan Template) 88=Sound Settings (%1) 89=Batch Scan Control Panel 90=Filter 91=Descreen 92=Panel Selection (%1) 93=Do you want to delete the scan template: %1? 94=Do you want to overwrite the scan template: %1? 95=The template name you wish to use for saving new settings happens to be the same as one of the default template names. The default scan templates are very handy to you for obtaining optimum scans with frequently-used applications, and their settings therefore can not be altered in any way. Please enter another new name. 96=This template name (%1) has already existed!\n\nDo you want to replace anyway? 97=The settings have been successfully saved by the new name: %1. 98=The name you wish to use for renaming an existing template happens to be the same as one of the default template names. The default scan templates are very handy to you for obtaining optimum scans with frequently-used applications, and their settings therefore can not be altered in any way. Please enter another new name. 99=This template name (%1) has already existed!\n\nDo you want to replace anyway? 100=The template has been successfully renamed as: %1. 101=The user interface will be switched to the Auto Scan Mode. Click the OK button to continue or the Cancel button to abort. 102=Audio File (*.wav; *.aiff) 103=MIDI file (*.mid; *.rmi; *.midi) 104=MP3 file (*.mp3) 105=Windows Media Audio file (*.wma) 106=Apply Auto Deskew after Auto Crop 107=The usual screened pattern for fine printed magazine is 200 lpi (line per inch) in terms of natural characteristics of printing press and paper. Therefore, high scanning resolution (>400dpi) does not enhance the image quality of pictures scanned from any printed materials such as magazines; on the contrary, it only dramatically increases the file size, occupies more memory resources and disk space, and slows everything down. \n\nAre you sure you want to use this resolution? 108=The selected sound file can no longer be found in the specified file folder. Please select another sound file or uncheck the option box from the Sound Settings window. 109=Applying the descreen filter. Please wait. (Page %1/%2) 110=Applying the descreen filter. Please wait. (Page %1) 111=Applying the %1 Filter. Please wait. (Page %2/%3) 112=Applying the %1 Filter. Please wait. (Page %2) 113=To achieve image accuracy, please place the same image or document used in this preview and align it at the same position when you conduct the final scan. 114=Auto Scan (%1) 115=%1 is in progress. Please wait. 116=Processing the dust removal. Please wait. 117=Processing the background removal. Please wait. 118=Generic Error 119=Scan failed! Please check the power connection by disconnecting the power adapter from the scanner and then reconnecting it. 120=Paper jam! Please remove the paper and replace it into the scanner's paper input tray. 121=The sound file is not found. Please click the [Browse] button to select an appropriate sound file or uncheck the option box. 122=The Color sRGB mode you have chosen does not support the image enhancement settings available in this Advanced Image Settings tab. 123=The scan mode you have chosen does not support the image enhancement settings available in this Color Correction tab. 124=The scan cannot be proceeded because the required scanner calibration data are not found in your system. Please calibrate this scanner first.\n\nFollow these steps to calibrate the scanner:\n1. Right-click the %1 icon in the task bar (near the clock).\n2. Click [Calibration Wizard] from the pop-up menu to launch the wizard.\n3. Follow the on-screen instructions to complete the calibration. 125=The transparency adapter (%1) is not found. Please consult the quick guide for more details.\n\nYou may click the [Retry] button after placing the %1 on the scanner properly. To scan films later, click the [Cancel] button. 126=Allocating system memory... 127=Processing speed scan settings... 128=Processing auto deskew... 129=Optimizing the image... 130=Processing color matching... 131=Processing image orientation (rotate, flip and/or mirror)... 132=Processing color correction... 133=The image size is too large for the system to handle efficiently, so image orientation (rotate, mirror and/or auto deskew) will not be processed.\n\nYou may use an image editing program to manually rotate the image afterwards. 134=Previewing the image and indexing pallets for Optimal 256 Colors. Please wait.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.