[Version] Signature="$CHICAGO$" Provider=%DC% ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318} Class=Printer DriverVer=02/14/2007,2.1.5.0 [UpdateRegEngineMagna] HKLM,"System\CurrentControlSet\Control\Print\Printers","DCG_EngineType",1,C HKLM,"System\CurrentControlSet\Control\Print\Printers","DriverClass",1,6 ; ; Manufacturer Sections ; ; This section lists all of the manufacturers that we will ; display in the Dialog box. ; [Manufacturer] "Datacard" [ControlFlags] ;CP40 PLUS ExcludeFromSelect=USBPRINT\Datacard_CP40_Plus9607 ExcludeFromSelect.NTX86=USBPRINT\Datacard_GroupCP40225E ;CP60 PLUS ExcludeFromSelect=USBPRINT\Datacard_CP60_Plus5624 ExcludeFromSelect.NTX86=USBPRINT\Datacard_CP60_Plus5624 ;CP80 PLUS ExcludeFromSelect=USBPRINT\Datacard_CP80_Plus96CB ExcludeFromSelect.NTX86=USBPRINT\Datacard_CP80_Plus96CB ;MISC ExcludeFromSelect.NTMIPS=* ExcludeFromSelect.NTPPC=* ExcludeFromSelect.NTALPHA=* ;;ExcludeFromSelect=UPGRADE_ID ;;ExcludeFromSelect=POOL_ID ; ; Model Sections ; ; These sections correspond with an entry listed in the ; [Manufacturer] section above. The models will be displayed in the order ; that they appear here. ; [Datacard] ;CP40 PLUS "CP Printer" = MagnaPrint,USBPRINT\Datacard_CP40_Plus9607 ;CP60 PLUS "CP Printer" = MagnaPrint,USBPRINT\Datacard_CP60_Plus5624 ;CP80 PLUS "CP Printer" = MagnaPrint,USBPRINT\Datacard_CP80_Plus96CB "CP Printer" = MagnaPrint "CP UniDir" = DCUNI "CP Printer Pool" = DCPOOL "CP Printer" = MagnaPrint,UPGRADE_ID ; ; Installer Sections ; ; These sections control file installation, and reference all files that ; need to be copied. The section name will be assumed to be the driver data ; file, unless there is an explicit DataFile section listed. ; [MagnaPrint] DriverFile=You_must_use_the_supplied_setup_program_to_install_this_printer! CopyFiles=DriverFiles Device=%device% VendorInstaller=CRDpnp.dll,dcinstall_launchsetup [DCPOOL] DriverFile=This_feature_is_not_supported_on_this_operating_system! CopyFiles=DriverFiles Device=%device% VendorInstaller=CRDpnp.dll,dcinstall_launchsetup [DCUNI] DriverFile=This_feature_is_not_supported_on_this_operating_system! CopyFiles=DriverFiles Device=%device% VendorInstaller=CRDpnp.dll,dcinstall_launchsetup [DriverFiles] crdpnp.dll [MagnaPrint.NTX86] CopyFiles=@CRD.PPD,DCPRINT_NT,API_NT,WDRVR_NT,PP_NT DataFile=CRD.PPD DataSection=DCPRINT_DATA_NT LanguageMonitor=%DC_MONITOR% PrintProcessor=%DC_PROCESSOR% DefaultDataType=RAW AddReg=UpdateRegEngineMagna NoTestPage=1 [DCPOOL.NTX86] CopyFiles=@CRD.PPD,DCPRINT_NT,API_NT,POOL_NT DataFile=CRD.PPD DataSection=DCPOOL_DATA_NT PrintProcessor=%DC_POOL_PROCESSOR% DefaultDataType=RAW AddReg=UpdateRegEngineMagna NoTestPage=1 [DCUNI.NTX86] CopyFiles=@CRD.PPD,DCPRINT_NT,API_NT DataFile=CRD.PPD DataSection=DCUNI_DATA_NT DefaultDataType=RAW AddReg=UpdateRegEngineMagna NoTestPage=1 ; Copy Sections ; ; Lists of files that are actually copied. These sections are referenced ; from the installer sections above. Only create a section if it contains ; two or more files (if we only copy a single file, identify it in the ; installer section, using the @filename notation) or if it's a color ; profile (since the DestinationDirs can only handle sections, and not ; individual files). ; [DCPRINT_NT] CRDCIV.DLL CRDPREF.HLP CRDPREF.CNT CRDDIFF.DLL CRDINT.EXE CRDMGPRA.DLL CRDMGPRW.DLL CRDTBL.DLL CRDNMON.DLL CRDPMON.DLL CRD.PPD CRD32ENU.DLL CRD32JPN.DLL CRD32DEU.DLL CRD32CHS.DLL CRD32CHT.DLL CRD32ESP.DLL CRD32FRA.DLL CRD32ITA.DLL CRD32PTB.DLL CRD32KOR.DLL CRD.CC CRD.PRF CRDGHIF.DLL CRDKRN.DLL CRDTIF.DLL CRDGUI.DLL CRDUSR.DLL CRDLMON.DLL CRDPROC.DLL InfoCentral_2_0.ico InfoCentral.chm CRDTOOL.EXE ICE_API.DLL ICE_API.BAK SETACL.EXE CRD_API.DLL CRDUNINSTALL.EXE CRDTB_LAUNCH.EXE ;ICEAPI16.DLL MSVCP60.DLL,,,0x00000010 ; never overwrite ;PAR1284.SYS PRFLIBRF CRDPRAT.EXE PROFLIB.DLL SRGB.PRF ;WHELP32.DLL CRDLandPrintBack.bmp,,,0x00000010 ; never overwrite CRDLandTopcoatBack.bmp,,,0x00000010 ; never overwrite CRDLandTopcoatFront.bmp,,,0x00000010 ; never overwrite CRDLandPrintFront.bmp,,,0x00000010 ; never overwrite CRDPortPrintBack.bmp,,,0x00000010 ; never overwrite CRDPortTopcoatBack.bmp,,,0x00000010 ; never overwrite CRDPortPrintFront.bmp,,,0x00000010 ; never overwrite CRDPortTopcoatFront.bmp,,,0x00000010 ; never overwrite CRDUDErase.bmp,,,0x00000010 ; never overwrite [API_NT] CRDCIV.DLL CRDPREF.HLP CRDPREF.CNT CRDDIFF.DLL CRDINT.EXE CRDMGPRA.DLL CRDMGPRW.DLL CRDTBL.DLL CRDNMON.DLL CRDPMON.DLL CRD.PPD CRD32ENU.DLL CRD32JPN.DLL CRD32DEU.DLL CRD32CHS.DLL CRD32CHT.DLL CRD32ESP.DLL CRD32FRA.DLL CRD32ITA.DLL CRD32PTB.DLL CRD32KOR.DLL CRD.CC CRD.PRF CRDGHIF.DLL CRDKRN.DLL CRDTIF.DLL CRDGUI.DLL CRDUSR.DLL CRDLMON.DLL CRDPROC.DLL InfoCentral.chm InfoCentral_2_0.ico CRDTOOL.EXE ICE_API.DLL ICE_API.BAK SETACL.EXE CRD_API.DLL CRDUNINSTALL.EXE CRDTB_LAUNCH.EXE ;ICEAPI16.DLL MSVCP60.DLL,,,0x00000010 ; never overwrite ;PAR1284.SYS PRFLIBRF CRDPRAT.EXE PROFLIB.DLL SRGB.PRF ;WHELP32.DLL CRDLandPrintBack.bmp,,,0x00000010 ; never overwrite CRDLandTopcoatBack.bmp,,,0x00000010 ; never overwrite CRDLandTopcoatFront.bmp,,,0x00000010 ; never overwrite CRDLandPrintFront.bmp,,,0x00000010 ; never overwrite CRDUDErase.bmp,,,0x00000010 ; never overwrite CRDPortPrintBack.bmp,,,0x00000010 ; never overwrite CRDPortTopcoatBack.bmp,,,0x00000010 ; never overwrite CRDPortPrintFront.bmp,,,0x00000010 ; never overwrite CRDPortTopcoatFront.bmp,,,0x00000010 ; never overwrite [WDRVR_NT] ;PAR1284.SYS [PP_NT] CRDPROC.DLL [POOL_NT] CRDPOOL.DLL ;[InfoDesktop] ;InfoCentral.chm ;[InfoStartup] ;InfoCentral.chm ; ; Data Sections ; ; These sections contain data that is shared between devices. ; [DCPRINT_DATA_NT] DriverFile=CRDKRN.DLL ConfigFile=CRDGUI.DLL HelpFile=CRDPREF.HLP LanguageMonitor=%DC_MONITOR% PrintProcessor=%DC_PROCESSOR% DefaultDataType=RAW [DCPOOL_DATA_NT] DriverFile=CRDKRN.DLL ConfigFile=CRDGUI.DLL HelpFile=CRDPREF.HLP PrintProcessor=%DC_POOL_PROCESSOR% DefaultDataType=RAW [DCUNI_DATA_NT] DriverFile=CRDKRN.DLL ConfigFile=CRDGUI.DLL HelpFile=CRDPREF.HLP ;PrintProcessor=%DC_PROCESSOR% DefaultDataType=RAW [LanguageMonitorHints] "CRD Language Monitor"="CRD Language Monitor,CRDLMON.DLL" ; ; Call SetupSetDirectoryId with 66000 to set the target directory at runtime ; (depending on which environment drivers are getting installed) ; [DestinationDirs] DefaultDestDir=66000 DCPRINT_NT=66000 API_NT=66002 PP_NT=66001 POOL_NT=66001 WDRVR_NT=66002,drivers ;InfoStartup=16407,"Datacard Card Printers" ;InfoDesktop=16409 ; diskid = description,tagfile,unused,subdir [SourceDisksNames] 1 = %DC%,driver.cab,,"" ; filename_on_source = diskid,subdir,size,checksum,spare,spare extra fields are nt-specific ; bootmediaord,targetdirectory,upgradedisposition,textmodedisposition,targetname [SourceDisksFiles] CRDCIV.DLL=1 CRDPREF.HLP=1 CRDPREF.CNT=1 CRDDIFF.DLL=1 CRDINT.EXE=1 CRDMGPRA.DLL=1 CRDMGPRW.DLL=1 CRDTBL.DLL=1 CRDNMON.DLL=1 CRDPMON.DLL=1 CRD.PPD=1 CRD32ENU.DLL=1 CRD32JPN.DLL=1 CRD32DEU.DLL=1 CRD32CHS.DLL=1 CRD32CHT.DLL=1 CRD32ESP.DLL=1 CRD32FRA.DLL=1 CRD32ITA.DLL=1 CRD32PTB.DLL=1 CRD32KOR.DLL=1 CRD.CC=1 CRD.PRF=1 CRDGHIF.DLL=1 CRDKRN.DLL=1 CRDTIF.DLL=1 CRDGUI.DLL=1 CRDUSR.DLL=1 CRDLMON.DLL=1 CRDPROC.DLL=1 InfoCentral.chm=1 InfoCentral_2_0.ico=1 CRDTOOL.EXE=1 ICE_API.DLL=1 ICE_API.BAK=1 SETACL.EXE=1 CRD_API.DLL=1 CRDUNINSTALL.EXE=1 CRDTB_LAUNCH.EXE=1 ;ICEAPI16.DLL=1 MSVCP60.DLL=1 ;PAR1284.SYS=1 PRFLIBRF=1 CRDPRAT.EXE=1 PROFLIB.DLL=1 SRGB.PRF=1 ;WHELP32.DLL=1 CRDPOOL.DLL=1 CRDLandPrintBack.bmp=1 CRDLandTopcoatBack.bmp=1 CRDLandTopcoatFront.bmp=1 CRDLandPrintFront.bmp=1 CRDPortPrintBack.bmp=1 CRDPortTopcoatBack.bmp=1 CRDPortPrintFront.bmp=1 CRDPortTopcoatFront.bmp=1 CRDUDErase.bmp=1 ; Localizable Strings [Strings] DC="Datacard" CLASSNAME="Printer" DC_MONITOR="CRD Language Monitor,CRDLMON.DLL" DC_PROCESSOR="CRD Print Processor,CRDPROC.DLL" DC_POOL_PROCESSOR="CRD Printer Pool,CRDPOOL.DLL"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.