; Windows Installation File for the Bluetooth PCMCIA Driver ; ; Copyright (c) 2000-2003, WIDCOMM Inc. ; [Version] Signature="$CHICAGO$" Class=BTW ClassGUID={95C7A0A0-3094-11D7-A202-00508B9D7D5A} Provider=%V_WIDCOMM% DriverVer=01/05/2006,5.0.1.1400 [ClassInstall] AddReg=BTWClassAddReg [BTWClassAddReg] HKR,,,,%BTWClassName% ;[ControlFlags] ;ExcludeFromSelect=* [Manufacturer] %V_WIDCOMM%=WIDCOMM [WIDCOMM] %IBMPC_Desc% = WBTDev, PCMCIA\IBM-BLUETOOTH_PC_CARD_II-9AC4 %IBMPC_DescF% = FBTDev, PCMCIA\IBM-BLUETOOTH_PC_CARD_II-FAST %IBMPC_Desc% = WBTDev, PCMCIA\IBM-BLUETOOTH_PC_CARD_IIS-5B8D [DestinationDirs] DefaultDestDir=11 InfFiles.Lst =10,INF ; where .inf files go MiscFiles.Lst =11 ; where driver files go on Win9x MiscFiles.Lst.NT =10,System32\Drivers ; where driver files go on Win2K [WBTDev] AddReg = WBTDev.AddReg,WBTDev.Config CopyFiles =MiscFiles.Lst [WBTDev.hw] AddReg = WBTDev.hw.AddReg [FBTDev] AddReg = FBTDev.AddReg,WBTDev.Config CopyFiles =MiscFiles.Lst [FBTDev.hw] AddReg = FBTDev.hw.AddReg [WBTDev.NT] AddReg = WBTDev.AddReg CopyFiles = MiscFiles.Lst.NT [WBTDev.NT.hw] AddReg = WBTDev.hw.AddReg [FBTDev.NT] AddReg = FBTDev.AddReg CopyFiles = MiscFiles.Lst.NT [FBTDev.NT.hw] AddReg = FBTDev.hw.AddReg [WBTDev.NT.LogConfigOverride] LogConfig = cfconfig [WBTDev.AddReg] HKR,,DevLoader,,"*ntkern" HKR,,NTMPDriver,,btpcbcsp.sys [WBTDev.hw.AddReg] HKR,,"BaudDivisor",0x10001,1 HKR,,"Prescaler",0x10001,0x20 HKR,,"SamplesPerBitValue",0x10001,4 ; DataRate parameter is for info only - it's not read by the driver HKR,,"DataRate",0x10001,921600 [FBTDev.AddReg] HKR,,DevLoader,,"*ntkern" HKR,,NTMPDriver,,btpcbcsp.sys [FBTDev.hw.AddReg] HKR,,"BaudDivisor",0x10001,1 HKR,,"Prescaler",0x10001,0x18 HKR,,"SamplesPerBitValue",0x10001,4 ; DataRate parameter is for info only - it's not read by the driver HKR,,"DataRate",0x10001,1228800 [WBTDev.Config] ; ; OVERRIDE ; HKR,Override,0000,1, \ ; ; CONFIGMG_VERSION ; 00,04,00,00, \ ; ; PRIORITY ; 00,30,00,00, \ ; ; ; OVERRIDE ; ; I/O Resource Descriptor 1 ; 24,00,00,00, \ ; Total length of I/O Resource Descriptor 02,00,00,00, \ ; ResType_IO = 0x00000002 01,00, \ ; IOD_Count; 0C,00, \ ; IOD_Type; // IOType_Range = 0x000C 00,00, \ ; IOD_Alloc_Base; 00,00, \ ; IOD_Alloc_End; 00,00, \ ; IOD_DesFlags; 00, \ ; IOD_Alloc_Alias; 00, \ ; IOD_Alloc_Decode; F0,FF, \ ; IOR_Align; // Mask for base alignment E0/F0 10,00, \ ; IOR_nPorts; // Number of ports, pony=10 00,01, \ ; IOR_Min; // Min port address FF,03, \ ; IOR_Max; // Max port address 00,00, \ ; IOR_RangeFlags; // Flags 00, \ ; IOR_Alias; // Alias offset 00, \ ; IOR_Decode; // Address specified 00,00,00,00, \ ; PCCARD flags, 0x40 = 16-bit port ; ; IRQ Resource Descriptor ; 14,00,00,00, \ ; Total length of IRQ Resource Descriptor 04,00,00,00, \ ; ResType_IRQ = 0x00000004 00,00, \ ; IRQD_Flags; 00,00, \ ; IRQD_Alloc_Num; // Allocated IRQ number FF,FF, \ ; IRQD_Req_Mask; // Mask of possible IRQs 00,00, \ ; IRQD_Reserved; 20,00,00,00, \ ; PCCARD flags, 0x20 = Level mode interrupts ; ; REQUEST_CONFIG_PKT Descriptor ; 19,00,00,00, \ ; Total length of REQUEST_CONFIG_PKT Descriptor 7C,89,00,00, \ ; (ResType_Ignored_Bit + PCCARD_DEVICE_ID) = 0x897C 00,00, \ ; Socket; 02,00, \ ; Attributes; 32, \ ; Vcc; 32, \ ; Vpp1; 78 32, \ ; Vpp2; 78 02, \ ; IntType; F8,00,00,00, \ ; ConfigBase; 08, \ ; Status; 00, \ ; Pin; 00, \ ; Copy; 04, \ ; ConfigIndex; 0F, \ ; Present; ; ; TERMINATOR ; 00,00,00,00 [MiscFiles.Lst] btpcbcsp.sys [MiscFiles.Lst.NT] btpcbcsp.sys [InfFiles.Lst] ;btpcibm.inf ;=============== Service Definition =============== ; HKLM\SYSTEM\CurrentControlSet\Control\Services\BTPCCARD [WBTDev.NT.Services] Addservice = BTPCCARD, 0x00000002, WBTDev.AddService [WBTDev.AddService] DisplayName = %WBTDev.SvcDesc% ServiceBinary = %10%\System32\Drivers\BTPCBCSP.SYS ErrorControl = 1 ; SERVICE_ERROR_NORMAL ServiceType = 1 ; SERVICE_KERNEL_DRIVER StartType = 3 ; SERVICE_DEMAND_START AddReg = WBTDev.AddReg [cfconfig] ; This is for CF950 in Win2000 only IOConfig=10@100-3ff%3f0(3ff::) IRQConfig=S:3,4,5,7,9,10,11,12,14,15 PcCardConfig=4 ConfigPriority=DESIRED [SourceDisksNames] 1=%drvDisk%,, [SourceDisksFiles] btpcbcsp.sys=1 [Strings] BTWClassName="Bluetooth Devices" drvDisk ="Bluetooth Install Disk" V_WIDCOMM ="IBM" IBMPC_Desc ="Bluetooth PC Card II from IBM" IBMPC_DescF ="Bluetooth PC Card II from IBM" WBTDev.SvcDesc ="Bluetooth BCSP Transport for Pc Card"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.