I. NetWare Driver Installation Instructions ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º NETWARE.31 º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ For : Netware V3.1 This subdirectory contains the NETWARE V3.1 device driver for IDE Cache Controllers: IDENV31.DSK The following steps explains the installation procedures. For Single Card Installation ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ STEP 1 ==> Install the IDE Cache Controller . Remove other add-on cards that may conflict with IDE card's ROM space or interrupt . Select this card as the primary controller . Select the ROM space of the IDE cache card . Enable floppy diskette STEP 2 ==> Plug in other add-on cards if necessary STEP 3 ==> At the NETWARE server prompt: ":" STEP 4 ==> Type: load IDENV31 Setting up Duplexing ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ STEP 1 ==> Follow the instructions in \README\README.IDE - "Installing 2 Tekram Cache Controllers in a System" STEP 2 ==> Plug in other add-on cards if necessary STEP 4 ==> At the NETWARE server prompt: ":" STEP 5 ==> Type: load IDENV31 (for primary) STEP 6 ==> Type: load IDENV31 (for secondary) ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º NETWARE.31X º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ For : Netware V3.11 Netware V3.12 Netware SFT-III This subdirectory contains the NETWARE V3.11, V3.12 and SFT-III device driver for IDE cache controllers: IDENV31X.DSK. The installation procedure is the same as V31, except the driver loaded here is IDENV31X.DSK. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º NETWARE.40X º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ For : Netware V4.00 Netware V4.01 Netware V4.02 Netware V4.1 This subdirectory contains the NETWARE V4.00/V4.01/4.02/4.1 device drivers for IDE cache controllers IDENV40.DSK & IDENV40.DDI. Further installation information can be found in NetWare manual.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.