HPT3XX2K.INF Driver File Contents (ide.zip)

[Version]
signature="$Windows NT$"
Class=SCSIAdapter
ClassGUID={4D36E97B-E325-11CE-BFC1-08002BE10318}
Provider=%HIGHPOINT%
CatalogFile=
DriverVer=06/18/2000,1.0.0.06182000

; Class Install
[ClassInstall32.NT]
Addreg=SCSIReg

[SCSIReg]
HKR,,,,%SCSIClassName%
HKR,,Installer32,,"SysSetup.Dll,ScsiClassInstaller"
HKR,,Icon,,"-10"
HKR,,LegacyInfOption,,"SCSI"

[DestinationDirs]
DefaultDestDir  = 12 ; DIRID_DRIVERS

[ControlFlags]
;
; Exclude the following devices from Select Device list.
; These represent 'combination' driver nodes, for which there are separate items to be
; presented to the user.  These combination nodes are only used when figuring out what
; driver node to associate with a pre-existing service.
;
ExcludeFromSelect = SCSI\ProcessorHPT_____RCM_DEVICE______

[Manufacturer]
%Highpoint%=Highpoint

[NODRV]

;
; The empty service entry is to fool the class installer - without a service
; entry this install section would be rejected as being part of a win9x inf.
; 

[NODRV.Services]
NoDriver=1



[Highpoint]
%PCI\VEN_1103&DEV_0004&REV_03.DeviceDesc%=Hpt3xxPCI,PCI\VEN_1103&DEV_0004&REV_03
%PCI\VEN_1103&DEV_0004&REV_04.DeviceDesc%=Hpt3xxPCI,PCI\VEN_1103&DEV_0004&REV_04
%SCSI\ProcessorHPT_____RCM_DEVICE______.DeviceDesc% = NODRV, SCSI\ProcessorHPT_____RCM_DEVICE______

[Hpt3xxPCI.NT]
CopyFiles=@Hpt3xx2K.sys
Reboot

[Hpt3xxPCI.NT.Services]
AddService = Hpt3xx2K, %SPSVCINST_ASSOCSERVICE%, Hpt3xxPCI_Service_Inst, Miniport_EventLog_Inst

[Hpt3xxPCI_Service_Inst]
ServiceType    = %SERVICE_KERNEL_DRIVER%
StartType      = %SERVICE_BOOT_START%
ErrorControl   = %SERVICE_ERROR_NORMAL%
ServiceBinary  = %12%\Hpt3xx2K.sys
LoadOrderGroup = SCSI Miniport
AddReg         = pnpsafe_pci_addreg
AddReg	       = bus_type_ide

;*************************************************************
;These addreg sections should be used when installins services to indicate
;which interface types are safe for PNP and which aren't.  INTERFACE_TYPE
;is defined in NTDDK.H

[pnpsafe_pci_addreg]
HKR, "Parameters\PnpInterface", "5", 0x00010001, 0x00000001

[pnpsafe_isa_addreg]
HKR, "Parameters\PnpInterface", "1", 0x00010001, 0x00000001

[pnpsafe_eisa_addreg]
HKR, "Parameters\PnpInterface", "2", 0x00010001, 0x00000001

[pnpsafe_mca_addreg]
HKR, "Parameters\PnpInterface", "3", 0x00010001, 0x00000001

[cardbus_interface_type]
HKR, "ScsiPort", "LegacyInterfaceType", 0x00010001, 0x00000005

;*************************************************************
;These addreg sections should be used for non-SCSI miniports 
;to indicate what STORAGE_BUS_TYPE they actually do support.

[bus_type_ide]
HKR, "Parameters", "BusType", 0x00010001, 0x00000003

[bus_type_fibre]
HKR, "Parameters", "BusType", 0x00010001, 0x00000006

[bus_type_raid]
HKR, "Parameters", "BusType", 0x00010001, 0x00000008

;*************************************************************
;The EventLog entries are the same for all SCSI miniports.
[Miniport_EventLog_Inst]
AddReg = Miniport_EventLog_AddReg

[Miniport_EventLog_AddReg]
HKR,,EventMessageFile,%REG_EXPAND_SZ%,"%%SystemRoot%%\System32\IoLogMsg.dll"
HKR,,TypesSupported,%REG_DWORD%,7

[SourceDisksNames]
1 = "HPT370 UDMA/ATA100 RAID Driver Diskette",\disk1,,,
2 = "HPT370 UDMA/ATA100 RAID Driver Diskette",\disk1,,\WIN
3 = "HPT370 UDMA/ATA100 RAID Driver Diskette",\disk1,,\NT
4 = "HPT370 UDMA/ATA100 RAID Driver Diskette",\disk1,,\2K

[SourceDisksFiles]
Hpt3xx2K.inf = 1,,
Hpt3xx2K.sys = 1,,

[strings]
Highpoint="Highpoint"
PCI\VEN_1103&DEV_0004&REV_03.DeviceDesc="HPT370 UDMA/ATA100 RAID Controller"
PCI\VEN_1103&DEV_0004&REV_04.DeviceDesc="HPT370 UDMA/ATA100 RAID Controller"
SCSI\ProcessorHPT_____RCM_DEVICE______.DeviceDesc = "Highpoint RCM Device"

;*******************************************
;Handy macro substitutions (non-localizable)
SPSVCINST_ASSOCSERVICE = 0x00000002
SERVICE_KERNEL_DRIVER  = 1
SERVICE_BOOT_START     = 0
SERVICE_ERROR_NORMAL   = 1
REG_EXPAND_SZ          = 0x00020000
REG_DWORD              = 0x00010001
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 2.00