=======================================================================
Stealth64 Graphics 2001 Series README.TXT
=======================================================================
Release Notes
-------------
This is v1.01 of the Stealth64 Graphics 2001 Series Windows 3.1 and
Windows 95 disk.
Windows 3.1 Installation Notes
------------------------------
1. Setup Windows 3.1 Display for Standard VGA display driver.
2. Run Windows.
3. From Windows Program Manager, Select FILE | RUN. Type
A:\INSTALL" and press ENTER.
4. Press "INSTALL" for first time installation or "UPDATE" if
upgrading the display driver.
5. When the driver is installed, Diamond Setup will prompt you
to select resolution, pixel depth, and monitor refresh.
6. Press OK.
7. Windows will be restarted.
After Stealth64 Graphics Windows 3.1 driver is installed, Stealth64 Group
will be created and Display Setup, DPMS, and Screen Centering Utilities
are copied.
Display Setup allows to select color depth, resolution monitor refresh,
font size, and vitrual desktops.
DPMS utility allows to select Stand-by, Suspend, or Off mode of the display
adapter and monitor. Set DPMS to ON, and set timer by using the scroll bar.
Press OK when finished.
Screen Centering utility allows to move screen to left, right, top, and bottom
as desired. Press OK to save setting. Every time Windows is lauched, the
saved settings will be programmed.
Windows 3.1
-----------
The following Windows 3.1 drivers are included:
Resolution Colors Displayed
---------- ----------------
640x480 256 65k 16m*
800x600 256 65k 16m**
1024x768 256 65k
1280x1024 256**
1600x1200 256**
* 2 Megabytes of on-board memory is required to utililize 32-bit mode
acceleration. In 1 memgabyte memory configuration, a frame buffer
driver is used.
** 2 Megabytes of on-board memory required.
Known Restrictions:
-------------------
Windows95 Installation Notes
------------------------------
1. Select "My Computer / Control Panel / Display / Settings /
Change Display Type / Change / Have Disk".
2. Insert the Stealth64 Graphics 2001 Windows 95 Display Driver
diskette into floppy disk drive A(B) and specify the path
"A(B):\win95", then click "OK".
3. Select Device :
a. PCI - the device will be automatically detected and shown.
b. VLB - select "Show all devices / Stealth64 Graphics 2001 VL".
4. Click "OK" then "Close" and follow Windows 95 instructions.
Note: This driver configures the display adapter's refresh rate
AUTOMATICALLY according to the capabilities of the monitor
to which it is attached and which has been properly configured
using MONITOR TYPE.
Contacting DIAMOND
------------------
Diamond can be reached through a number of ways:
Postal Service : Diamond Multimedia Systems, Inc.
2880 Junction Avenue
San Jose, CA 95134-1922
Voice (Main) : (408) 325-7000
Voice (TechSppt): (408) 325-7100 [M-F 6-7; Sat 8-4 Pacific]
[plus 24hr automated help]
FAX (Main) : (408) 325-7070
FAX (Support) : (408) 325-7171
BBS (to 2400) : (408) 325-7080
BBS (9600+) : (408) 325-7175
CompuServe : GO DMNDONLINE
America Online : GO DIAMOND
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.