PenMount DMC6000 for RS232 Linux X Window drivers & utilities
Version: 1.0
Files:
Driver/ -- Penmount driver
Utility -- Penmount calibration utility
Penmount right click emulation utility
xorg.conf.sample -- xorg.conf sample
Please check your Fedora version first and download the PenMount driver,
then follow the procedures to install Linux driver and calibration utilities.
A. Driver installation procedures:
1. Login system with "root"
2. Copy penmount driver "penmount_drv.o" into the directory named"/usr/X11R6/lib/modules/input"
EX: #mount /dev/cdrom /mnt/cdrom
#cp /mnt/cdrom/Driver/Linux/Driver/penmount_drv.o /usr/X11R6/lib/modules/input/penmount_drv.o
3. Edit Xorg.conf file to load driver. You can refer to "Xorg.conf.sample"
a. # gedit /etc/X11/Xorg.conf (in Xwindow only, or you can use "vi" text mode editor)
(use copy and paste to modify the following lines)
b. In the Section "ServerLayout", add a statement :
InputDevice "Penmount" "AlwaysCore"
c. Add a Section "InputDevice" :¡]Here we suppose that touch screen controller is connecting to COM1)
Section "InputDevice"
Identifier "PenMount"
Driver "penmount"
Option "Protocol" "Auto"
Option "Device" "/dev/ttyS0" #ttys0=COM1,ttys1=COM2
Option "PMode" "1"
Option "MinX" "10"
Option "MaxX" "1000"
Option "MinY" "10"
Option "MaxY" "1000"
Option "Beep" "1" # 0 = no beep, 1 = beep enabled
Option "PressVol" "100" # volume of beep (press event)
Option "PressPitch" "880" # pitch of beep (press event)
Option "PressDur" "15" # length of beep in 10ms (press event)
Option "ReleaseVol" "0" # volume of beep (release event)
Option "ReleasePitch" "1200" # pitch of beep (release event)
Option "ReleaseDur" "10" # length of beep in 10ms (release event)
Option "BaudRate" "19200" # or "9600" (baud rate of serial port)
EndSection
4. Enable Beep Sound
In Fedora Core3,the PC buzzer is disabled in the default mode,to activate beep sound,please follow the steps below:
a.#cd /etc/rc.d
b.#vi or gedit rc.local file
c.add a statement "modprobe pcspkr"
d.save and exit
e.reboot
5. # startx
6. Do calibration for the first installation.
7. The Penmount can work well.
B. Utilities Installation procedures:
1. Copy the file under utitliy/ into the "/usr/local/pencal" directory.
# mkdir /usr/local/pencal
# cp * /usr/local/pencal
2. Input "startx" to start X window.
EX: # startx
3. In the X window system, open a terminal window and type
EX: # cd /usr/local/pencal
# ./adv-calib [4|9|16]
./adv-calib 4 (=calibration 4 point)
./adv-calib 9 (=calibration 9 point)
./adv-calib 16 (=calibration 16 point)
The display will appear a calibration window, follow up the red points to do calibration,
When calibration window close then Finished!
4. Issue the following command to display the right click button icon:
# ./right-click-emulator
Copyright (c) By Dialogue Technology Corp. All rights reserved.
July 18, 2006
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.