The modules in the 'common' directory 'source\common'
Are device specific and can be used to create new
applications other than the example applications
provided in 'source\apps'.
Contents:
atod26.c - functions to read the voltage of the
DS2438
atod26.h - include file for humidity sensor
(DS2438)
atod20.c - module to do scale set up, conversion,
read, and write for channels A,B,C,D
of the DS2450 1-Wire Quad A/D Converter
atod20.h - header file for the DS2450 functions.
cnt1d.c - module to read the DS2423 1-kbit/4-kbit
1-Wire RAM with Counter associated
to the memory page
cnt1d.h - header file for the DS2423 functions.
crcutil.c - keeps track of the CRC for 8 and 16
bit operations
findtype.c - finds all of the devices of the same type
(family code) on a 1-Wire Net
findtype.h - header file.
humutil.c - DS1923 humidity logger utility functions
for setting missions and reading current missions.
humutil.h - include file for the DS1923 utility functions.
ibsha33o.c - functions to do operations on the DS2432.
ibsha33.h - include file for the sha functions on the
DS2432.
ioutil.c - I/O utility functions
mbappreg.c - memory bank functions for the application register
iButtons
mbappreg.h - header file
mbee.c - memory bank functions for the electically erasable
programmable read only memory
mbee.h - header file
mbee77.c - memory bank functions for the DS1923 and DS1977.
mbee77.h - header file
mbeprom.c - memory bank functions for the electrically
programmable read only memory
mbeprom.h - header file
mbnv.c - memory bank functions for the read/write nonvolatile
memory
mbnv.h - header file
mbnvcrc.c - memory bank functions for the read/write nonvolatile
memory with crc
mbnvcrc.h - header file
mbscr.c - memory bank functions for the scratchpad
mbscr.h - header file
mbscrcrc.c - memory bank functions for the scratchpad with crc
mbscrcrc.h - header file
mbscree.c - memory bank functions for the scratchpad ee
mbscree.h - header file
mbscrex.c - memory bank functions for the scratchpad ex
mbscrex.h - header file
mbscrx77.c - memory bank functions for the scratchpad of the
DS1923 and DS1977.
mbscrx77.h - header file
mbsha.c - memory bank functions for the sha parts
mbsha.h - header file
mbshaee.c - memory bank functions for the shaee parts
mbshaee.h - header file
owcache.c - cache functions for file I/O
owerr.c - Error handling routines. Provides exception
stack and printError functions.
owfile.c - rudimentary level functions for reading
and writing TMEX files on NVRAM iButton
using the packet level functions
owfile.h - header file
ownet.h - include file for 1-Wire Net library
owpgrw.c - page read/write functions for file I/O
owprgm.c - the program job functions for the file I/O
using EPROM
ps02.c - Functions for communicating to the DS1991
ps02.h - Header file.
pw77.c - Password functions for the DS1923 and DS1977.
pw77.h - Header file.
rawmem.c - the utility that sorts memory bank functions
rawmem.h - header file
screenio.c - for different platform screen input and output
sha18.c - Low-level memory and SHA functions for the
DS1963S.
sha33.c - Low-level memory and SHA functions for the
DS1961S.
shadbtvm.c - Transaction-level functions for SHA Debits
without a hardware coprocessor. Also, this
file contains some Protocol-level functions
to replace their 'hardware-only' couterparts.
shadebit.c - Transaction-level functions for SHA Debits
with hardware.
shaib.c - Protocol-level functions as well as useful
utility functions for sha applications.
shaib.h - Header file.
sprintf.c - remake of I/O for Visor and Palm apps.
swt05.c - turns the DS2405 Addressable Switch on
and off and reads the on/off status of
the device
swt05.h - Header file.
swt12.c - performs operations on a DS2407 Dual
Addressable Switch and tests the different
channels
swt12.h - include this file to test the DS2407 Dual
Addressable Switch
sw1f.c - tests the DS2409 commands and searches for
the DS2409 and the devices on the branch of
the DS2409, also reports the activity latches
swt1f.h - Header file.
temp10.c - Module to read the temperature measurement
for the DS1920/DS1820/DS18S20 1-Wire
thermometer.
temp10.h - Header file.
thermo21.c - Thermocron iButton utility functions
thermo21.h - include this file for Thermocron demo
time04.c - 1-Wire Clock device functions for (DS2404,
DS1994, DS1427).
time04.h - Header file.
weather.c - to find the type of weather station, modules to
find the direction of the weather station,
and read/write output files
weather.h - Include this file for the Weather Station struct
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.