1. w9x-ntx.zip Driver
2. Readme.txt File Contents

Readme.txt Driver File Contents (w9x-ntx.zip)

README FILE

	For:	Windows 95/98/NT4.0/2000
        Date:   10/05/01

Introduction
------------
This driver is required for Windows 95/98/NT4.0/2000

Included files are:
	MDMCXRAJ.INF	- modem driver file
	README.TXT	- this file

Installation
------------
Use the Windows Modem installation program 
in the "Control Panel" Folder.

	1) If you received this driver on a diskette then
	   insert it in the floppy disk drive.
	2) Using the Windows "Start" Menu, go to settings and
	   open the "Control Panel"
	3) Double click on "Modem" icon in "Control Panel"
	   The "Install Modem" Windows will then appear.
	4) Tick the "Don't detect my modem, I will select it from a list"
	   box, then the "Next" button. It will then show a window that
	   says "Building Driver Information".
	5) Select the "Have a Disk" button then "OK" if you install this driver from a
	   floppy disk, or select "Browse..." to access the folder where you
	   have saved the file you downloaded and decompressed from the
	   CXR BBS server.
	6) Next will appear a window with all CXR SA devices listed.
	   Highlight the device and then press "Next" button.
	7) The configuration wondo will then appear. Select the correct
	   port, speed etc. Then press the "Next" button.
	8) Another window will appear with a "Finish" button. Press it.

	   Installation is completed. The CXR device is now
	   ready to be used by Windows.


IMPORTANT
---------
	WINDOWS 9x MODEM DRIVER AND NON-WINDOWS 9x SOFTWARE.
	----------------------------------------------------
You may still get softwares that have not been converted to
Windows 9x mode. These softwares still require the user to select
his communication device from a dedicated list and can not use
Windows 9x device drivers. You must then install these softwares
and drivers as under Windows 3.xx.

	SUB-ADDRESSING
	--------------
Not all contries provide sub-addressing. Ask your telephone
operator to install this function.

Sub-addressing is an easy way of selecting a communication mode
on CXR ISDN devices. The sub-address is attached to the
telephone number by a star, e.g.
	ATD123456*8
In this case the sub-address 8 would select the V14 mode if
the CXR TA is in factory default setting.
Please refer to chapter 2.4 and 2.5 in the user's manual.

HISTORY
-------

22/02/96: Drivers created and preliminary tests done
11/04/96: Drivers added for 9636 & 9656
23/07/96: Drivers modified for AJ1445/46, AJ2885/90, AJ2423, AJ96xx
            reset string & init string.
20/09/96: Add compression/correction in 6413 modem/PSTN (C.SIMARD)

15/10/96: Rev 0.A0 - Drivers added for AJ 6434, 6413 Modified (B.G.)
08/01/97: Rev 0.B0 - Drivers added for AJ 2840 and 1448 modified (PM).
10/01/97: Rev 0.C0 - 6413 modified.
20/01/97: Rev 0.C0 - correct part of this text. Driver not changed
22/01/97: Rev 0.D0 - AJ2885 modifed (Dialer and Fax).
04/02/97: Rev 0.D1 - 64xx display of V120 mode.
27/05/97: Rev 0.D2 - Add UNIMODEM for AJ 2885-2 SP - FP et FT.
30/05/97: Rev 0.D3 - Drivers added for AJ 6425.
04/06/97: Rev 0.D4 - Drivers added for AJ 6411 Pad B, Pad D.
		   - Add 31.200, 33.600 Bps for AJ 2885-2890.
23/06/97: Rev 0.D5 - Modify UNIMODEM 2885 and 2890.
28/08/97: Rev 0.D6 - Modify init command &F for AJ modems.
		   - Add UNIMODEM AJ2840 Rev 2.2F6		
15/09/97: Rev 0.D7 - Correct UNIMODEM 6411FTS
17/09/97: Rev 0.D8 - Correct UNIMODEM 1445FT, 1445FP
31/05/99: Rev 0.D9 - Add 2885 Lease Line drivers
09/06/99: Rev 0.D10- Add following drivers
		     *   CXR AJ 2885 LS 2w originate
		     *   CXR AJ 2885 LS 2w answer
		     *   CXR AJ 2885 LS 4w originate
		     *   CXR AJ 2885 LS 4w answer
		     *+$ CXR AJ 2885 LS forced
		     *+ù Modem LS 1080+SCP RA1000	
13/08/99: Rev 0.D11- Modification S95=1 (instead of 47) for 2840
		     Result Code CONNECT DCE SPEED.
		     PC Anywhere anomaly
01/09/99: Rev 1.00 - Drivers added for AJ6490, 64xx Responses modified, 64xx DCE speed displayed

22/01/01: Rev 1.10 - S117=5 added in 64xx sections for data modes(V120,PPP...) alowing 
                     to answer on the 2nd or 3rd RING.

30/03/01: Rev 1.11 - S124=0 added n 64xx first Init string to improve AT command response for
                     fast computers (PIII > 800Mhz).
10/05/01: Rev 1.20 - Add following driver
			*	CXR AJ 2885 DCE speed
				( DCE speed display)
12/22/03: Rev 1.30 - Remove "%D5" in the INIT command for WindowsXP compatibility

ADDRESS
-------
	CXR SA					CXR SA
	Sales					R&D and Manufacturing
	70-86 Avenue de la Republique		ZI de l'Ornette
	92325 Chatillon cedex			28410 Abondant
	FRANCE					FRANCE

	Web site	www.cxr.fr