1. HS416A_LAN_Intel.zip Driver
  2. Oemnxp24.inf File Contents

Oemnxp24.inf Driver File Contents (HS416A_LAN_Intel.zip)

;============================================================================
; Current Version %VER 4.0.0.2
;============================================================================

[Identification]
    OptionType = NetTransport
[Options]
    S24TRANS
[FileConstants]
UtilityInf					= "UTILITY.INF"
subroutineinf				= "SUBROUTN.INF"
SoftwareType				= "transport"
InfName						= "OEMNXP24.inf"
Exit_Code					= 0
NetEventDLL					= "%SystemRoot%\System32\netevent.dll"
Manufacturer				= "Symbol Technologies, Inc."
ProductMajorVersion			= "4"
ProductMinorVersion			= "01"
ProductVersion				= $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName			= "s24trans"
ProductSoftwareImagePath	= "\SystemRoot\System32\drivers\s24trans.sys"

NetRuleSoftwareType			= "s24trans lmNetService ndisTransport"
NetRuleSoftwareClass		= {"rasCapableTransport netBiosTransport"}

NetRuleSoftwareUse			= $(SoftwareType)" yes yes"
NetRuleSoftwareBindForm		= """s24trans"" yes yes simple"

ProductKeyName				= $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName				= $(!NTN_ServiceBase)"\"$(ProductSoftwareName)"\Parameters"
[GeneralConstants]
from						= ""
to							= ""
ExitCodeOk					= 0
ExitCodeCancel				= 1
ExitCodeFatal				= 2
KeyNull						= ""
MAXIMUM_ALLOWED				= 33554432
RegistryErrorIndex			= NO_ERROR
KeyProduct					= ""
KeyParameters				= ""
TRUE						= 1
FALSE						= 0
NoTitle						= 0
ExitState					= "Active"
OldVersionExisted			= $(TRUE)
DriverPath					= $(!STF_NTPATH)\drivers
[date]
Now							= {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
        goto returnoptions
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
    Set !G:DebugOutputControl = 1
    Set !DebugOutputControl = 1
    Set !STF_DISPLAYDEBUGOUTPUT = 1

    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
	set szDLLPath = $($6)

	Debug-Output "OEMNXP24.INF: szDLLPath is: "$(szDLLPath)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
	    Debug-Output "OEMNXP24.INF: STATUS_NOLANGUAGE"$($0)

        Return STATUS_NOLANGUAGE
    endif

	Debug-Output "OEMNXP24.INF: STF_CWDDIR is: "$(!STF_CWDDIR)
    Debug-Output "OEMNXP24.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
        set Continue = $(OK)
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(FunctionTitle)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    Ifstr(i) $(!NTN_InstallMode) == deinstall
        set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
        set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
        set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
        Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "OEMNXP24.INF: ShellCode error: cannot get an error string."
            goto ShellCodeError
        endif
        set Error = $($R0)
        set from = end
        set to = end
        goto nonfatalinfo
    else
        set StartLabel = installadapter
    endif
    set RadioDefault = 2
    set RadioIn = {$(RadioDefault)}
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)
installadapter = +

	Debug-Output "OEMNXP24.INF: installadapter"

    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
		Debug-Output "OEMNXP24.INF: Found an already installed version - exit"
        CloseRegKey $(KeyProduct)
        Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle), $(ProductVersion)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error: cannot get an error string."
            goto ShellCodeError
        endif
        goto end
    endif
    CloseRegKey $(KeyProduct)
    goto installproduct
installproduct = +
	
	Debug-Output "OEMNXP24.INF: installproduct"
    StartWait
    ifint $(OldVersionExisted) == $(FALSE)
        Ifstr(i) $(DoCopy) == "YES"
			Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
			Ifint $($ShellCode) != $(!SHELL_CODE_OK)
				Goto ShellCodeError
			Else-Ifstr(i) $($R0) == STATUS_FAILED
				Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
				ifint $($ShellCode) != $(!SHELL_CODE_OK)
                   goto ShellCodeError
				endif
				set Error = $($R0)
				Goto fatal
			Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
				Goto successful
			Endif
			Set SrcDir = $($R1)
        Endif
	Endif

    ;install "Install-Option"
    ;ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
	;	Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
	;	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	;		goto ShellCodeError
    ;   endif
    ;    Set Error = $($R0)
    ;    Goto fatal
    ;Endif

	Debug-Output "OEMNXP24.INF: call UtilityInf to add TDI component"
	Set OEM_ABANDON_ON = TRUE
    Shell $(UtilityInf), AddSoftwareComponent,	$(Manufacturer), +
												$(ProductSoftwareName), +
												$(ProductSoftwareName), +
												$(ProductSoftwareDisplayName), $(STF_CONTEXTINFNAME), +
												$(ProductSoftwareImagePath), "kernel", "TDI", {}, "",+
												$(NetEventDLL)
    Set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) !=  NO_ERROR
		EndWait
        CloseRegKey $($R1)
        CloseRegKey $($R2)
        CloseRegKey $($R3)
        CloseRegKey $($R4)
        CloseRegKey $($R5)
        goto fatalRegistry
    endif
    Set SoftProductKey      = $($R1)
    Set SoftNetRuleKey      = $($R2)
    Set SoftServiceKey      = $($R3)
    Set KeyParameters       = $($R4)
    Set SoftLinkageKey      = $($R5)
    Set NewValueList		= {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
							   {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                               {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                               {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
                               {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
                               {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                           	   {hidden,$(NoTitle),$(!REG_VT_DWORD),1}, +
                               {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
	Debug-Output "OEMNXP24.INF: call UtilityInf to add Service component"
    Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
    Set RegistryErrorIndex = $($R0)
    Ifstr $(RegistryErrorIndex) != NO_ERROR
		CloseRegKey $(SoftProductKey)
        CloseRegKey $(SoftNetRuleKey)
        CloseRegKey $(SoftServiceKey)
        CloseRegKey $(SoftLinkageKey)
        CloseRegKey $(KeyParameters)
        Goto fatalRegistry
    endif
    Set NewValueList = {{type    ,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)}, +
                        {use     ,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                        {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
						{Infname ,$(NoTitle),$(!REG_VT_SZ),$(InfName)}, +
                        {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
	Debug-Output "OEMNXP24.INF: call UtilityInf to add Transport component"
    Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
    Set RegistryErrorIndex = $($R0)
    Ifstr $(RegistryErrorIndex) != NO_ERROR
		CloseRegKey $(SoftProductKey)
        CloseRegKey $(SoftNetRuleKey)
        CloseRegKey $(SoftServiceKey)
        CloseRegKey $(SoftLinkageKey)
        CloseRegKey $(KeyParameters)
        Goto fatalRegistry
    endif
    Set NewValueList = {{NbProvider,$(NoTitle),$(!REG_VT_SZ),"_nb"}}
    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    Ifstr $(RegistryErrorIndex) != NO_ERROR
		CloseRegKey $(SoftProductKey)
        CloseRegKey $(SoftNetRuleKey)
        CloseRegKey $(SoftServiceKey)
        CloseRegKey $(SoftLinkageKey)
        Goto fatalRegistry
    endif
    CloseRegKey $(SoftProductKey)
    CloseRegKey $(SoftNetRuleKey)
    CloseRegKey $(SoftServiceKey)
    CloseRegKey $(SoftLinkageKey)


	; Install service
;	Set serviceBin = $(!STF_WINDOWSSYSPATH)\S24EvMon.exe
;	Debug-Output "OEMNXP24.INF: call LoadLibrary to get LibHand"
;	LoadLibrary "Setup Disk #1" $(szDLLPath) LibHand
;	Debug-Output "OEMNXP24.INF: call LibraryProcedure to add SERVICE: "$(serviceBin)
;	LibraryProcedure ResultList, $(LibHand), CmdInstallService $(serviceBin)
;	Debug-Output "OEMNXP24.INF: Service Added free library"
    ; Free DLL
;    FreeLibrary $(LibHand)

    goto writeparameters
writeparameters = +
    CloseRegKey $(KeyParameters)
    EndWait
    goto successful
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
        $(ProductSoftwareName)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error"
        goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        goto fatalregistry
    endif
	; Remove service
;	LoadLibrary "x" $(szDLLPath) LibHand
;	LibraryProcedure ResultList, $(LibHand), CmdRemoveService ""
    ; Free DLL
;    FreeLibrary $(LibHand)

	; remove installed files
    AddfileToDeleteList $(!STF_WINDOWSSYSPATH)"\drivers\S24Trans.SYS"
	Debug-Output "Remove Adapter file "$(!STF_WINDOWSSYSPATH)"\drivers\S24Trans.SYS"
	AddfileToDeleteList $(!STF_WINDOWSSYSPATH)"\S24Evmon.exe" 
	Debug-Output "Remove Adapter file "$(!STF_WINDOWSSYSPATH)"\S24Evmon.exe"
	AddfileToDeleteList $(!STF_WINDOWSSYSPATH)"\S24MuDll.dll" 
	Debug-Output "Remove Adapter file "$(!STF_WINDOWSSYSPATH)"\S24MuDll.dll"
	AddfileToDeleteList $(!STF_WINDOWSSYSPATH)"\oemnxp24.inf" 
	Debug-Output "Remove Adapter file "$(!STF_WINDOWSSYSPATH)"\oemnxp24.inf"

    goto end
UpgradeSoftware = +
    ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
        OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
        Ifstr $(KeyProduct) != $(KeyNull)
            GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
            set Version = *($(VersionInfo), 4)
            Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error"
                goto ShellCodeError
            endif
            set !UG_Filename = $($R0)
            ifstr(i) $(!UG_Filename) != ""
                install "Install-Update"
                ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
                    goto fatal
                endif
            endif
            SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
            SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
            ifint $(Version) != $(ProductVersion)
            endif
            CloseRegKey $(KeyProduct)
        else
            goto fatalregistry
        endif
    endif
    goto end
successful = +
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
        goto "end"
    endif
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fatal = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText) 
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto removeadapter
    endif
    goto end
end = +
    goto term
term = +
    Return $(CommonStatus)
[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
        AddSectionFilesToCopyList Files-$(Option) $(SrcDir)Protocol\$(!STF_PLATFORM) $(!STF_WINDOWSSYSPATH)\drivers
        AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    ifstr(i) $(DoConfig) == "YES"
    endif
    Exit
[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   exit
[Source Media Descriptions]
;    1  = "Spectrum24 Packet Driver Installation Disk"  , TAGFILE = s24trans

[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386
[Files-Inf]
;1,oemnxp24.inf,	 SIZE=3000

[Files-S24TRANS]
;1,s24trans.sys, SIZE=70000
;1,S24EvMon.exe, OVERWRITE=ALWAYS,  COPY,  DESTINATION=$(!STF_WINDOWSSYSPATH), SIZE=80000 
;1,S24MuDll.dll, OVERWRITE=ALWAYS,  COPY,  DESTINATION=$(!STF_WINDOWSSYSPATH), SIZE=80000 

[LanguagesSupported]
    ENG
[OptionsTextENG]
    NDISPERF     = "Wireless LAN Transport Driver"
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
FunctionTitle   = "Packet Driver"
ProductSoftwareDescription      = "Wireless LAN Transport Driver"
ProductSoftwareDisplayName = "Wireless LAN Transport Driver"
;ProductSoftwareTitle    = "Wireless LAN Transport Driver"
ProductSoftwareTitle    = "WLAN Transport"
ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."
[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"
[FileDependentDlgENG]
GroupLabel = "Optimization:"
Radio1 = "&Minimize Memory Used"
Radio2 = "&Balance"
Radio3 = "M&aximize Throughput && Connections"
DlgType = "Radio"               
DlgTemplate = "NBF"             
Caption = $(FunctionTitle)
OptionsGreyed = {}
HelpContext = $(!IDH_DB_OEMNXP24_INS)
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

Copyright © 1996 - 2024 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web3, load: 3.45