>>>>>>>Read me<<<<<<<<<<
^^^Enable/Disable Audio.
1)Run TestPro.exe program
2)Click "Initialize" Button,
3)In "Misc" frame, "Enable Audio" Button will be enable if PCI audio is disable.
4)Press "Enable Audio" Button, after press this button becomes "Disable Audio".
5)Click "Free" button.
6)Click "OK" or "Cancel" to exit.
7)Reboot your computer.
8)System reports a New Hardware is found, then install the attached driver.
^^^Read/Write Eeprom.
1)Run TestPro.exe program
2)Click "Initialize" Button,
3)For read Eeprom,
fill the below content.
Device: a0(Note: eeprom address.)
WriteNum: 01
WriteBuf: 00
ReadNum: 08(Note: read 8 bytes from address 0x00.)
ReadBuf:(Empty)
Click "Read..." button.
The data retrieved from eeprom will be in ReadBuf.
4)For write Eeprom,
fill the below content.
Device: a0
WriteNum: 09(Note: the number of data to be written inlucde the start address.)
WriteBuf: 001122334455667788("1122334455667788" will be written from the start address "00".)
ReadNum: (Empty)
ReadBuf:(Empty)
Click "Write..." button.
5)Click "Free" button.
6)Click "OK" or "Cancel" to exit.
Note:
TestPro.exe and GTVendor.dll should be in the same directory.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.