1. 2920_INF_XP-Vista.exe Driver
2. ReadMe_XP.txt File Contents

ReadMe_XP.txt Driver File Contents (2920_INF_XP-Vista.exe)

05/09/07  2920/2920A  


----------------------------------------------------------------------
Read Me - Zoom V.90 PCI Plus 2920/2920A 
	  Windows INF Version 2.3.3.7
----------------------------------------------------------------------

(To properly view this document, select Word Wrap from the Format or Edit menu and adjust the length if necessary.)


WINDOWS XP INSTALLATION INSTRUCTIONS

1. Remove any previously installed Zoom PCI modem drivers:
 a.) Click the Start button, then Control Panel, then Add or Remove Programs.
 c.) Select the Zoom V90 PCI Faxmodem and click Remove.
 d.) When the uninstallation is complete, click Finish.
 e.) If the Phone and Modem Options control panel appears, click Cancel. 

2. Shut down your computer and install the modem hardware if you have not done so (refer to the modem manual if necessary). Otherwise, restart your computer.  

3. Click the Start button and then Control Panel.

4. Click Performance and Maintenance and then System (or double-click on System, if you are in Classic view).

5. Click the Hardware tab and then the Device Manager button.

6. Right-click on Actiontec V90 PCI Modem, which should be listed under the Modems category. 

7. Select Update Driver.

8. The Hardware Update Wizard appears:
 a.) If prompted to connect to Windows Update to search for software, select "No, not this time" and click Next.
 b.) Select "Install from a disk or specified location (Advanced)" and click Next. Note: It is not necessary to insert an installation CD or disk.
 c.) Select "Don't search. I will choose the driver to install" and click Next.
 d.) Click Have Disk. The Install From Disk dialog box appears.
 e.) Click Browse, locate and select the file named Zoom_pci (which is inside the Zoom2920_Setup) folder, and click Open.
 f.) Click OK and then Next. 
 g.) You may see a disclaimer box regarding Windows Logo testing. You can safely  disregard this message and click Continue Anyway.
 h.) When the installation is complete, click Finish.

9. To confirm the installation:
 a.) Click the Start button, then Control Panel, then Printers and Other Hardware (or Phone and Modem Options, if you are in Classic view).
 b.) Click Phone and Modem Options and then the Modems tab.
 c.) Select the Zoom modem and click Properties, then Diagnostics.
 d.) Click the Query Modem button. 
 e.) You should see a list of Commands and Responses. Scroll down to ATI3 and check that the response includes "Zoom." 

Congratulations! You have successfully installed your Zoom V.90 PCI Plus faxmodem.