Official BIOS release 6A for ST6 / ST6-RAID
Release information:
[ENGLISH]
1. Fix the unbootable issue when installing a hard disk onto IDE-2 and
set the boot sequence by following as HDD_1, HDD_0 then floppy.
2. Support Tualatin Celeron 1.3 GHz.
3. HPT BIOS version: 2.0.1024.
4. BIOS compile date: 11/27/2001
[TRADITIONAL CHINESE]
1. ¸Ñ¨M·í¦w¸Ë¤@ÁûµwºÐ©ó IDE-2 ¤W¡A¨Ã±N¶}¾÷¶¶±Ô³]¬°HDD_1, HDD_0, floppy®É
µLªk¶}¾÷ªº°ÝÃD¡C
2. ¤ä´© Tualatin Celeron 1.3 GHz¡C
3. HPT BIOS ª©¥»: 2.0.1024¡C
4. BIOS ¤é´Á: 11/27/2001¡C
********************************* NOTE *********************************
1. How to upgrade BIOS:
a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
Windows95/98
b. Run "st66a.exe" to extract all files.
c. Run "runme.bat"
*** Please notice that we suggest you flashing the bios with switches
"/py /sn /cd /cp /cc /cks /R" or by "runme.bat".
d. For more detail, please visit:
http://fae.abit.com.tw/cht/download/bioshelp.htm (Chinese)
http://fae.abit.com.tw/eng/download/bioshelp.htm (English)
2.After BIOS updated, pull off the power core and then clear the CMOS data
via jumper before restarting system please.
============================================================================
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.