1. kd7ec.exe Driver
2. kd7_ec.txt File Contents

kd7_ec.txt Driver File Contents (kd7ec.exe)

                 BIOS release EC for  KD7/KD7-RAID/KD7-E  V1.0


Release information:

[ENGLISH]

1. Change "CPU Disconnect Function" default setting.
2. Add AMD Duron 1400(133)/1600(133)/1800(133) support.
3. Fix the issue that the system occasionally hangs at post code 26
   if the system is using 133/166 FSB CPU and the power was turned off
   during boot up procedure when the post code is AE.
4. Change the BIOS of HPT 372 to version 2.34 for 48-bit LBA support
   (HDD size larger then 137GB). The RAID function is for KD7-RAID only.
   This BIOS version is also for non-RAID boards and HPT BIOS will be
   automatically disabled while RAID controller chip is not detected.
5. BIOS compile date: 08/28/2003.

[¤¤¤å]

1. ­×¥¿ "CPU Disconnect Function" ¿ï¶µ¡A¹w³]¬° Disabled¡C
2. ¼W¥[¤ä´© AMD Duron 1400(133)/1600(133)/1800(133)¡C
3. ­×¥¿¨Ï¥Î 133/166 ¥~ÀWCPU¶}¾÷®É postcode °õ¦æ¨ì AEh ®É¡AÃö±¼¹q·½«á¦A
   ¶}¾÷°¸¦Ó·|·í¦b postcode 26h ªº°ÝÃD¡C
4. §ó´«HightPoint HPT372 BIOS ¬° v2.34¡C¥H¤ä´©48 Bit LBA (¤ä´©®e¶q¶W¹L
   137GªºµwºÐ)¥» BIOS ¦P®É¾A¥Î©ó«D RAID ¤§¥D¾÷ ªO¤W¡C·í BIOS °»´ú¨ì±z
   ¨Ï¥Îªº¥D¾÷ªO¤£§t RAID ®É±N·|¦Û°Ê disable HPT BIOS¡C
5. BIOS ¤é´Á: 8/28/2003¡C


*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "kd7ec.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================