1. P330N_NT.zip Driver
2. Readme.txt File Contents

Readme.txt Driver File Contents (P330N_NT.zip)

OLYMPUS P-330N Printer Driver (Windows NT 4.0 version)
IBM PC/AT compatible personal computer (Windows NT 4.0)
README
Ver. 1.00

* Thank you very much for purchasing this product. This file contains inform
ation about the P-330N Printer Driver for Windows NT 4.0. For more informati
on, refer to the provided installation guide.

* The P-330N Printer Driver (Windows NT 4.0 version) can only be used with t
he P-330N digital color printer. Proper performance with other OLYMPUS digit
al color printers, such as the P-150, P-300 or P-330, or other brands of pri
nters is not guaranteed.

* System requirements
IBM PC/AT compatible personal computer
CPU: i486DX or better (Pentium or later recommended)
OS: Windows NT 4.0 (Service Pack 3 or later recommended)
Memory: 32 MB or more (64 MB or more is recommended)
Hard disk space: 30 MB or more free space (60 MB or more is recommended)
Monitor: Minimum 256 colors  (32,000 colors or more is recommended)

More hard disk space may be required, depending on the application used to o
pen images and the number of images displayed at one time.

* Margins for printing papers(Landscape Orientation)
Top: 7.35 mm
Bottom: 7.35 mm
Left: 13.8 mm
Right: 12.9 mm

Notes
1. Paper
Be sure to use the print paper and ink ribbon cartridge supplied together in
the same carton.

2. Intensity, RGB color adjustment and sharpness
You can easily adjust the intensity, RGB color and sharpness using the print
er driver. If you are using an application which offers the same adjustments
as the P-330N Printer Driver, use the application. If you perform adjustment
s using both, the image may be printed with unexpected results.

3. Split printing
Split images are printed more inside on the sticker compare to the normal pr
int to match the cutting position.

4. Canceling printing
Once printing has started, you cannot cancel it from the print monitor.
When print paper has been fed and printing starts, do not interrupt printing
. If you do so, the paper may be jammed.

5. Selecting [Shared]
If your computer does not have a network service installed, you cannot selec
t [Shared] when configuring the printer.

6. Error message
The printer driver does not support bi-directional printing, so error messag
es cannot be transmitted from the printer to your PC. You may find that the
error message that appears has no relations with the actual error that oc
curred. If an error message appears on the display, please check the following.
(1) Make sure the print paper or ink ribbon have not run out.
(2) Check the connections are correct.
(3) Make sure the printer is on.
(4) Check to see if paper is not jammed in the printer.

7. Print quantity
You can set the print quantity from the printer driver. With some applicatio
ns however, the proper quantity may not be printed.  In this case, set it fr
om the application.

8. Adding print paper or replacing a used ink ribbon cartridge
If the print paper or ink ribbon cartridge runs out, be sure to add paper or
change the cartridge within the transmission retry time of 5 minutes.
To add print paper, pull the automatic feeder out of the printer.
When loading an ink ribbon cartridge, wind the ink ribbon tightly.

* Problems with applications
1. CAMEDIA Master 1.0/1.1 (OLYMPUS)
Transfer speed may be extremely slow after printing is started, depending on
the position of the cursor. If this is occurs, move the cursor to a position
as far as possible from the image being printed.

2. Others
Depending on the application, automatic margins may not be set properly. If
this occurs, set margins manually referring to the [Margin] section in this
file.