.3.5.1.5.6.9 1000 #Monitoring Stopped .3.5.1.5.6.10 1001 #Monitoring Started .3.5.1.5.6.1 1002 #Communications Established .3.5.1.5.4.2 1003 #Utility Power Restored .3.5.1.5.2.1.1 1004 #UPS Self-Test Passed .3.5.1.4.1 1005 #Administrative Shutdown Scheduled .3.5.1.4.2 1006 #Shutdown Cancelled .3.5.1.5.3.2 1009 #UPS Battery Replaced .3.5.1.5.4.6 1013 #Overload Condition Solved .3.5.1.5.2.2.1 1014 #Runtime Calibration Started .3.5.1.5.2.2.2 1015 #Runtime Calibration Finished .3.5.1.4.3 1016 #System Shutdown Starting .3.5.1.5.5.2 1017 #UPS Returned From Bypass .3.5.1.5.3.7 1020 #Battery Communication Established .3.5.2.3.1 1025 #Shutdown In Progress .3.5.1.4.4 1026 #Administrative Shutdown Pending .3.5.1.4.5 1027 #Administrative Shutdown Cancelled .3.5.1.5.3.8 1033 #Battery Added .3.5.1.5.3.9 1034 #Battery Removed .3.5.1.5.5.4 1040 #Bypass Contactor OK .3.5.1.5.5.6 1041 #Bypass Relay Normal .3.5.1.5.5.10 1042 #Bypass User Initiated .3.5.1.5.3.10 1050 #Battery Disconnected .3.5.1.5.3.11 1051 #Battery Reconnected .3.5.1.5.3.12 1052 #Battery Installed .3.5.1.5.4.10 1060 #AVR Trim No longer Active .3.5.1.5.4.9 1061 #AVR Boost No Longer Active .3.5.1.5.1.2 1102 #UPS Internal Temperature In Bounds .3.5.1.5.7.4 1200 #Base Module Fan Normal .3.5.1.5.7.6 1201 #System Level Fan Normal .3.5.1.5.13.2 1202 #Site Wiring Normal .3.5.1.5.13.4 1203 #Battery Charger Normal .3.5.1.5.13.6 1204 #Main Relay Normal .3.5.1.5.13.8 1205 #Inverter Normal .3.5.1.5.13.10 1206 #Base Power Supply Normal .3.5.1.5.4.8 1207 #Output Load In Range .3.5.1.5.5.9 1350 #Bypass Ended .3.5.1.5.5.1 1366 #Bypass Enabled .3.5.1.7.5 1401 #Contact Normal (Zone 1) .3.5.1.7.6 1402 #Contact Normal (Zone 2) .3.5.1.7.7 1403 #Contact Normal (Zone 3) .3.5.1.7.8 1404 #Contact Normal (Zone 4) .3.5.1.7.13 1453 #Temperature In Range (Probe 1) .3.5.1.7.14 1454 #Temperature In Range (Probe 2) .3.5.1.7.9 1463 #Humidity In Range (Probe 1) .3.5.1.7.10 1464 #Humidity In Range (Probe 2) .3.5.1.5.3.19 1470 #Graceful Shutdown Started .3.5.1.5.4.1 2000 #UPS On Battery .3.5.1.5.4.3 2002 #AVR Boost Active .3.5.1.5.3.3 2003 #Low Battery Condition .3.5.1.5.2.2.3 2004 #Runtime Calibration Aborted .3.5.1.5.4.4 2007 #AVR Trim Active .3.5.1.5.3.14 2030 #Smart Cell Signal Returned .3.5.1.5.5.3 2037 #Bypass Contactor Failed .3.5.1.5.5.5 2040 #Bypass Relay Malfunction .3.5.1.5.5.7 2041 #Bypass Contactor Stuck in Bypass .3.5.1.5.5.8 2042 #Bypass Contactor Stuck in On Position .3.5.1.5.5.11 2043 #Bypass Maintenance .3.5.1.5.5.12 2044 #Bypass Internal Fault .3.5.1.5.15.1 2050 #Invalid Shutdown Delay .3.5.1.5.6.2 3000 #Lost Communication With UPS .3.5.1.5.4.5 3001 #UPS Output Overload .3.5.1.5.2.1.2 3002 #UPS Self-Test Failed .3.5.1.5.3.4 3003 #UPS Battery Is Discharged .3.5.1.5.6.3 3004 #Comm Lost While On Battery .3.5.1.5.6.8 3005 #Communication Not Established .3.5.1.5.3.6 3006 #Battery Communication Lost .3.5.1.5.3.13 3010 #Check Smart Cell Signal .3.5.1.5.7.3 3014 #Base Module Fan Fault .3.5.1.5.13.9 3015 #Base Power Supply Failure .3.5.1.5.3.1 3016 #Battery Needs Replacing .3.5.1.5.7.5 3017 #System Level Fan Fault .3.5.1.5.13.5 3018 #Main Relay Malfunction .3.5.1.5.13.1 3020 #Site Wiring Fault .3.5.1.5.13.3 3021 #Battery Charger Failure .3.5.1.5.13.7 3022 #Inverter Fault .3.5.1.5.3.16 3030 #Insufficient Runtime Available .3.5.1.5.4.7 3031 #Output Load threshold Exceeded .3.5.1.7.1 3103 #Contact Fault (Zone 1) .3.5.1.7.2 3104 #Contact Fault (Zone 2) .3.5.1.7.3 3105 #Contact Fault (Zone 3) .3.5.1.7.4 3106 #Contact Fault (Zone 4) .3.5.1.5.1.1 3107 #Maximum Internal Temperature Exceeded .3.5.1.7.12 3110 #Humidity Out of Range (Probe 1) .3.5.1.7.11 3111 #Humidity Out of Range (Probe 2) .3.5.1.7.15 3120 #Temperature Out Of Range (Probe 1) .3.5.1.7.16 3121 #Temperature Out Of Range (Probe 2)Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.