1. apc_sw_ups_705_windows_noarch.zip Driver
2. EventMappings.ini File Contents

EventMappings.ini Driver File Contents (apc_sw_ups_705_windows_noarch.zip)

.3.5.1.5.6.9   1000 #Monitoring Stopped
.3.5.1.5.6.10  1001 #Monitoring Started
.3.5.1.5.6.1   1002 #Communications Established
.3.5.1.5.4.2   1003 #Utility Power Restored
.3.5.1.5.2.1.1 1004 #UPS Self-Test Passed
.3.5.1.4.1     1005 #Administrative Shutdown Scheduled
.3.5.1.4.2     1006 #Shutdown Cancelled
.3.5.1.5.3.2   1009 #UPS Battery Replaced
.3.5.1.5.4.6   1013 #Overload Condition Solved
.3.5.1.5.2.2.1 1014 #Runtime Calibration Started
.3.5.1.5.2.2.2 1015 #Runtime Calibration Finished
.3.5.1.4.3     1016 #System Shutdown Starting
.3.5.1.5.5.2   1017 #UPS Returned From Bypass
.3.5.1.5.3.7   1020 #Battery Communication Established
.3.5.2.3.1     1025 #Shutdown In Progress
.3.5.1.4.4     1026 #Administrative Shutdown Pending
.3.5.1.4.5     1027 #Administrative Shutdown Cancelled
.3.5.1.5.3.8   1033 #Battery Added
.3.5.1.5.3.9   1034 #Battery Removed
.3.5.1.5.5.4   1040 #Bypass Contactor OK
.3.5.1.5.5.6   1041 #Bypass Relay Normal
.3.5.1.5.5.10  1042 #Bypass User Initiated
.3.5.1.5.3.10  1050 #Battery Disconnected
.3.5.1.5.3.11  1051 #Battery Reconnected
.3.5.1.5.3.12  1052 #Battery Installed
.3.5.1.5.4.10  1060 #AVR Trim No longer Active
.3.5.1.5.4.9   1061 #AVR Boost No Longer Active
.3.5.1.5.1.2   1102 #UPS Internal Temperature In Bounds
.3.5.1.5.7.4   1200 #Base Module Fan Normal
.3.5.1.5.7.6   1201 #System Level Fan Normal
.3.5.1.5.13.2  1202 #Site Wiring Normal
.3.5.1.5.13.4  1203 #Battery Charger Normal
.3.5.1.5.13.6  1204 #Main Relay Normal
.3.5.1.5.13.8  1205 #Inverter Normal
.3.5.1.5.13.10 1206 #Base Power Supply Normal
.3.5.1.5.4.8   1207 #Output Load In Range
.3.5.1.5.5.9   1350 #Bypass Ended
.3.5.1.5.5.1   1366 #Bypass Enabled
.3.5.1.7.5     1401 #Contact Normal (Zone 1)
.3.5.1.7.6     1402 #Contact Normal (Zone 2)
.3.5.1.7.7     1403 #Contact Normal (Zone 3)
.3.5.1.7.8     1404 #Contact Normal (Zone 4)
.3.5.1.7.13    1453 #Temperature In Range (Probe 1)
.3.5.1.7.14    1454 #Temperature In Range (Probe 2)
.3.5.1.7.9     1463 #Humidity In Range (Probe 1)
.3.5.1.7.10    1464 #Humidity In Range (Probe 2)
.3.5.1.5.3.19  1470 #Graceful Shutdown Started
.3.5.1.5.4.1   2000 #UPS On Battery
.3.5.1.5.4.3   2002 #AVR Boost Active
.3.5.1.5.3.3   2003 #Low Battery Condition
.3.5.1.5.2.2.3 2004 #Runtime Calibration Aborted
.3.5.1.5.4.4   2007 #AVR Trim Active
.3.5.1.5.3.14  2030 #Smart Cell Signal Returned
.3.5.1.5.5.3   2037 #Bypass Contactor Failed
.3.5.1.5.5.5   2040 #Bypass Relay Malfunction
.3.5.1.5.5.7   2041 #Bypass Contactor Stuck in Bypass
.3.5.1.5.5.8   2042 #Bypass Contactor Stuck in On Position
.3.5.1.5.5.11  2043 #Bypass Maintenance
.3.5.1.5.5.12  2044 #Bypass Internal Fault
.3.5.1.5.15.1  2050 #Invalid Shutdown Delay
.3.5.1.5.6.2   3000 #Lost Communication With UPS
.3.5.1.5.4.5   3001 #UPS Output Overload
.3.5.1.5.2.1.2 3002 #UPS Self-Test Failed
.3.5.1.5.3.4   3003 #UPS Battery Is Discharged
.3.5.1.5.6.3   3004 #Comm Lost While On Battery
.3.5.1.5.6.8   3005 #Communication Not Established
.3.5.1.5.3.6   3006 #Battery Communication Lost
.3.5.1.5.3.13  3010 #Check Smart Cell Signal
.3.5.1.5.7.3   3014 #Base Module Fan Fault
.3.5.1.5.13.9  3015 #Base Power Supply Failure
.3.5.1.5.3.1   3016 #Battery Needs Replacing
.3.5.1.5.7.5   3017 #System Level Fan Fault
.3.5.1.5.13.5  3018 #Main Relay Malfunction
.3.5.1.5.13.1  3020 #Site Wiring Fault
.3.5.1.5.13.3  3021 #Battery Charger Failure
.3.5.1.5.13.7  3022 #Inverter Fault
.3.5.1.5.3.16  3030 #Insufficient Runtime Available
.3.5.1.5.4.7   3031 #Output Load threshold Exceeded
.3.5.1.7.1     3103 #Contact Fault (Zone 1)
.3.5.1.7.2     3104 #Contact Fault (Zone 2)
.3.5.1.7.3     3105 #Contact Fault (Zone 3)
.3.5.1.7.4     3106 #Contact Fault (Zone 4)
.3.5.1.5.1.1   3107 #Maximum Internal Temperature Exceeded
.3.5.1.7.12    3110 #Humidity Out of Range (Probe 1)
.3.5.1.7.11    3111 #Humidity Out of Range (Probe 2)
.3.5.1.7.15    3120 #Temperature Out Of Range (Probe 1)
.3.5.1.7.16    3121 #Temperature Out Of Range (Probe 2)