; SoundMAX device information file for IBM ; Analog Devices, Inc. Copyright(c) 1998 - 2005 ; SoundMAX package [1] [Version] Signature="$CHICAGO$" Class=MEDIA ClassGUID={4d36e96c-e325-11ce-bfc1-08002be10318} provider=%ANLG% DriverVer = 02/03/2005,%DriverBuildID% CatalogFile=smx.cat [ControlFlags] ExcludeFromSelect = * [Manufacturer] %MfgName%=AnalogDevices, NTamd64 [AnalogDevices.NTamd64] %*WDM_AC97AUD.DeviceDesc%=WDM_SHADOW, pci\ven_8086&dev_27DE&subsys_03211014 [DestinationDirs] DefaultDestDir = 10,system32\drivers ; %SystemRoot%\system32\drivers WDM_AC97AUD.CopyList = 10,system32\drivers ; %SystemRoot%\system32\drivers [WDM_AC97AUD.DelReg] HKR, Drivers HKR, Disable HKR, Settings HKR, Sensaura\Configuration [WDM_AC97AUD.AddReg] HKR,,AssociatedFilters,,"wdmaud,swmidi,redbook" HKR,,Driver,,smwdm.sys HKR,,NTMPDriver,,"smwdm.sys,sbemul.sys" HKR,Drivers,SubClasses,,"wave,midi,mixer" HKR,Drivers\wave\wdmaud.drv, Driver,,wdmaud.drv HKR,Drivers\midi\wdmaud.drv, Driver,,wdmaud.drv HKR,Drivers\mixer\wdmaud.drv,Driver,,wdmaud.drv HKR,Drivers\wave\wdmaud.drv, Description,,%*WDM_AC97AUD.DeviceDesc% HKR,Drivers\midi\wdmaud.drv, Description,,%WDM_MIDI% HKR,Drivers\mixer\wdmaud.drv,Description,,%*WDM_AC97AUD.DeviceDesc% ; Establish max/min values for Volume nodes. "xxxxMax" is the setting for ; maximum volume level (minimum attenuation). "xxxxMin" is the setting for ; minimum volume level (maximum attenuation). These values are the Max/Min ; bits written to the register for the Max/Min level. As an example, the ; MicIn maximum volume can be set to 2 which equals a maximum output of +9 db, ; the MicIn minimum is set to 10 which equals a minimum output of - 12 db. ; (All register values are Hex.) HKR, Settings, "HP_VMax", 1, 06 ; Headphone Volume HKR, Settings, "FntVMax", 1, 08 ; Front Volume HKR, Settings, "SurVMax", 1, 08 ; Surround Volume HKR, Settings, "CtrVMax", 1, 08 ; Center Volume HKR, Settings, "LfeVMax", 1, 08 ; Lfe Volume ( sub woofer ) ; Max/Min record levels. xxxRMax is the maximum gain code for that record ; source. xxxRMin is the minimum gain code for that source. ; Default volume / mute settings. These are the initial installation settings. ; The volume default values are tested againts the Max/Min values that may have ; been previously established. The Boolean settings (Mute, 20 db, etc.) are ; set as 0 = FALSE, non-zero = TRUE; ; ; Note that a particular hardware platform may not implement all signal paths. ; ; This is the mixed digital PCM stream (Wave, SW Synth and Digital Redbook) ; This setting is not adjustable from a Mixer control slider. This is ; not adjustable from the Mixer applet. HKR, Settings, "NULL", 1, 00 ; Generic handler for un-named nodes HKR, Settings, "MasM", 1, 00 ; Master Mute HKR, Settings, "LinV", 1, 08 ; LineIn Volume HKR, Settings, "VidV", 1, 08 ; Video Volume HKR, Settings, "VidM", 1, 01 ; Video Volume HKR, Settings, "AuxV", 1, 08 ; Aux Volume HKR, Settings, "MicM", 1, 01 ; Mic In Mute HKR, Settings, "MicS", 1, 00 ; Mic In Select (0 == Mic1, 1 == Mic2) HKR, Settings, "HP_V", 1, 08 ; Headphone Volume HKR, Settings, "HP_M", 1, 00 ; Headphone Mute HKR, Settings, "FntV", 1, 08 ; Surround Volume HKR, Settings, "FntM", 1, 00 ; Surround Mute HKR, Settings, "SurV", 1, 08 ; Surround Volume HKR, Settings, "SurM", 1, 00 ; Surround Mute HKR, Settings, "CtrV", 1, 08 ; Center Volume HKR, Settings, "LfeV", 1, 08 ; Lfe Volume ( sub woofer ) HKR, Settings, "CtrM", 1, 00 ; Center Mute HKR, Settings, "LfeM", 1, 00 ; Lfe Mute ( sub woofer ) HKR, Settings, "JStr", 1, 01 ; Use OEM supplied string HKR, Settings, "AltMicSelect", 1, 01 ; Define MS as an On/Off control HKCU,Software\Microsoft\Multimedia\Audio,DefaultFormat,,"IBM Quality" HKCU,Software\Microsoft\Multimedia\Audio\WaveFormats,"IBM Quality",1,01,00,02,00,22,56,00,00,88,58,01,00,04,00,10,00 ; Record Controls HKR, Settings, "VidR", 1, 01 ; Video HKR, Settings, "AuxR", 1, 01 ; Aux HKR, Settings, "LinR", 1, 01 ; Line In HKR, Settings, "MonR", 1, 01 ; Mono output loopback HKR, Settings, "PhoR", 1, 01 ; Phone ; Enable Interrupt on each processed BDL ; 00 = Interrupt only when KMixer request ; 01 = Interrupt on every BDL HKR, Settings, "SGUpdate", 1, 01 ; Disable Node display on mixer applet. Set to 00 to enable, 01 to disable. HKR, Disable, "NULL", 1, 00 ; Generic handler for un-named nodes HKR, Disable, "20db", 1, 00 ; Mic 20db Gain HKR, Disable, "MicV", 1, 00 ; Mic In Volume HKR, Disable, "MicM", 1, 00 ; Mic In Mute HKR, Disable, "FntV", 1, 00 ; Front Volume HKR, Disable, "FntM", 1, 00 ; Front Mute HKR, Disable, "SurV", 1, 00 ; Surround Volume HKR, Disable, "SurM", 1, 00 ; Surround Mute HKR, Disable, "CtrV", 1, 00 ; Center Volume HKR, Disable, "CtrM", 1, 00 ; Center Mute HKR, Disable, "LfeV", 1, 00 ; Lfe Volume ( sub woofer ) HKR, Disable, "LfeM", 1, 00 ; Lfe Mute ( sub woofer ) ; Record Controls HKR, Disable, "MicR", 1, 00 ; Mic ;If you want the MonoOut to track the Master Volume control, set MonoWithMaster ;to 01. If you want separate Master Volume and MonoOut controls, set ;MonoWithMaster to 00. If MonoWithMaster = 01, the "MonoOut" controls will _not_ ;be present on SndVol32 (the Master Volume control will control the MonoOut ;output) ;If a AD1885/6 is detected and you want the (headphone) amplifier to track the ;Master Volume control, set HPWithMaster to 01 (same code written to Master ;Volume and Headphone volume based upon Master volume settings). If you want ;separate controls for the Master Volume and Headphone, set HPWithMaster to 00. ;If ;HpWithMaster = 01, the "Headphone" controls will _not_ be present on ;SndVol32 (the Master Volume control will control the Headphone amplifier output) ;If HpWithMaster = 01, the following INF settings are ignored, HP_VMax, HP_VMin, ;HP_V, HP_M, HP_P. ;An AD1887 uses the settings for the Master Volume to control the output and ;automatically sets HPWithMaster. ;If a AD1885/6 is detected and the (headphone) amplifier is used, set HP_P to 00. ;If the amplified output is not used, set HP_P to 01. If you selected ;HPWithMaster, this setting is interpreted to be 01 (not active). [SPDIFLAP.AddReg] ; Enable/Disable the S\PDIF channel HKR, Disable, "SPDF", 1, 00 ; 01 = Disabled (default), 00 = Enabled ; S/PDIF channel Data Type HKR, Settings, "CAC3", 1, 01 ; 00 = AC3 not checked (default), 01 = AC3 checked HKR, Settings, "CPCM", 1, 01 ; 00 = PCM not checked (default), 01 = PCM checked [COMMON2.AddReg] HKR, Disable, "PhoM", 1, 01 ; Phone Mute HKR, Disable, "PhoR", 1, 01 ; Phone HKR, Disable, "PhoV", 1, 01 ; Phone Volume HKR, Disable, "VidM", 1, 01 ; Video Mute HKR, Disable, "VidR", 1, 01 ; Video Recording HKR, Disable, "VidV", 1, 01 ; Video Volume HKR, Settings, "PhoM", 1, 01 ; Phone Mute [Zeus.AddReg] HKR, Settings, "20db", 1, 01 ; Mic 20db Gain (enable gain =1) HKR, Settings, "HPWithMaster", 1, 01 ; 00 = Normal, 01 = Amplifier output tracks Master HKR, Settings, "MonoWithMaster", 1, 01 ; 00 = Normal, 01 = MonoOut tracks Master HKR, Settings, "P3DB", 1, 01 ; Use enhancement on digital streams HKR, Settings, "P3DV", 1, 0A ; Stereo Wide (Phat 3D) Volume ( 0 - F ) HKR, Settings, "PCMOutVolume", 1, 07 ; PCM Out volume 8 = 0db gain, 7 = +1.5db [Valentin.AddReg] HKR, Disable, "AuxM", 1, 01 ; Aux Mute HKR, Disable, "AuxR", 1, 01 ; Aux Record HKR, Disable, "AuxV", 1, 01 ; Aux Volume HKR, Disable, "MicS", 1, 01 ; Mic In Select HKR, Disable, "PCBM", 1, 01 ; PCBeep Mute HKR, Disable, "PCBV", 1, 01 ; PCBeep Volume [SteCom.AddReg] HKR, Disable, "MonR", 1, 01 ; Mono output loopback HKR, Settings, "ACDR", 1, 05 ; CD (Analog CD, not Redbook Audio) HKR, Settings, "ACDV", 1, 08 ; Analog CD Volume (not digital redbook !) HKR, Settings, "AnalogEQVolume", 1, 00 ; AD1981A Speaker EQ volume 0.0 dB gain HKR, Settings, "JackSense", 1, 80, 08, 00, 00 ; Configure the 1981(A) Jack Sense Register HKR, Settings, "JackSenseDisable", 1, 00 ; Disable Jack Sense circuitry HKR, Settings, "MicBoostVal", 1, 00 ; AD1981A Microphone Boost. 00 = +20db, 01 = +10db, 02 = +30db HKR, Settings, "LinM", 1, 01 ; LineIn Mute HKR, Settings, "MagicNumber", 1, 00, 30, 00, 60; Enable Andrea Pure Audio + Superbeam Microphone Node HKR, Settings, "MasV", 1, 04 ; Master Volume HKR, Settings, "MicR", 1, 07 ; Mic Record HKR, Settings, "MicRMax", 1, 0F ; Mic Record Maximum HKR, Settings, "MicV", 1, 0D ; Mic Volume HKR, Settings, "MonM", 1, 01 ; Mono Out Mute HKR, Settings, "OutR", 1, 01 ; Line output loopback HKR, Settings, "PCBM", 1, 01 ; PCBeep Mute HKR, Settings, "StereoMic", 1, 01 ; 00 = mono mic support, 01 = stereo mic support HKR, Settings, "VRefDisable", 1, 00 ; AD1981A VRefDisable. 00 = enable, 01 = disable HKR, Settings, "VRefLevel", 1, 01 ; AD1981A VRefLevel. 00 = 2.25v, 01 = 3.7v [WDM_AC97AUD_GUID.AddReg] HKLM,%MediaCategories%\%ADIGUID.PcBeep%,Name,,%Pin.PcBeep% HKLM,%MediaCategories%\%ADIGUID.PcBeep%,Display,1,00,00,00,00 HKLM,%MediaCategories%\%ADIGUID.Phone%,Name,,%Pin.Phone% HKLM,%MediaCategories%\%ADIGUID.Phone%,Display,1,00,00,00,00 HKLM,%MediaCategories%\%ADIGUID.Video%,Name,,%Pin.Video% HKLM,%MediaCategories%\%ADIGUID.Video%,Display,1,00,00,00,00 HKLM,%MediaCategories%\%ADIGUID.MonoOut%,Name,,%Pin.MonoOut% HKLM,%MediaCategories%\%ADIGUID.MonoOut%,Display,1,00,00,00,00 HKLM,%MediaCategories%\%ADIGUID.PCBeepVol%,Name,,%Control.PCBeepVol% HKLM,%MediaCategories%\%ADIGUID.PCBeepVol%,Display,1,00,00,00,00 HKLM,%MediaCategories%\%ADIGUID.PhoneVol%,Name,,%Control.PhoneVol% HKLM,%MediaCategories%\%ADIGUID.PhoneVol%,Display,1,00,00,00,00 HKLM,%MediaCategories%\%ADIGUID.VIDVol%,Name,,%Control.VIDVol% HKLM,%MediaCategories%\%ADIGUID.VIDVol%,Display,1,00,00,00,00 HKLM,%MediaCategories%\%ADIGUID.20DB%,Name,,%Control.20DB% HKLM,%MediaCategories%\%ADIGUID.20DB%,Display,1,00,00,00,00 HKLM,%MediaCategories%\%ADIGUID.PHATBypass%,Name,,%Control.PHATBypass% HKLM,%MediaCategories%\%ADIGUID.PHATBypass%,Display,1,00,00,00,00 HKLM,%MediaCategories%\%ADIGUID.MonoVol%,Name,,%Control.MonoVol% HKLM,%MediaCategories%\%ADIGUID.MonoVol%,Display,1,00,00,00,00 HKLM,%MediaCategories%\%ADIGUID.MicSelect%,Name,,%Control.MicSelect% HKLM,%MediaCategories%\%ADIGUID.MicSelect%,Display,1,00,00,00,00 HKLM,%MediaCategories%\%ADIGUID.CaptureVid%,Name,,%Control.CaptureVid% HKLM,%MediaCategories%\%ADIGUID.CaptureVid%,Display,1,00,00,00,00 HKLM,%MediaCategories%\%ADIGUID.CaptureMono%,Name,,%Control.CaptureMono% HKLM,%MediaCategories%\%ADIGUID.CaptureMono%,Display,1,00,00,00,00 HKLM,%MediaCategories%\%ADIGUID.CapturePhone%,Name,,%Control.CapturePhone% HKLM,%MediaCategories%\%ADIGUID.CapturePhone%,Display,1,00,00,00,00 HKLM,%MediaCategories%\%ADIGUID.Front%,Name,,%Pin.Front% HKLM,%MediaCategories%\%ADIGUID.Front%,Display,1,00,00,00,00 HKLM,%MediaCategories%\%ADIGUID.Surround%,Name,,%Pin.Surround% HKLM,%MediaCategories%\%ADIGUID.Surround%,Display,1,00,00,00,00 HKLM,%MediaCategories%\%ADIGUID.Center%,Name,,%Pin.Center% HKLM,%MediaCategories%\%ADIGUID.Center%,Display,1,00,00,00,00 HKLM,%MediaCategories%\%ADIGUID.Lfe%,Name,,%Pin.Lfe% HKLM,%MediaCategories%\%ADIGUID.Lfe%,Display,1,00,00,00,00 HKLM,%MediaCategories%\%ADIGUID.FrontVol%,Name,,%Control.FrontVol% HKLM,%MediaCategories%\%ADIGUID.FrontVol%,Display,1,00,00,00,00 HKLM,%MediaCategories%\%ADIGUID.SurroundVol%,Name,,%Control.SurroundVol% HKLM,%MediaCategories%\%ADIGUID.SurroundVol%,Display,1,00,00,00,00 HKLM,%MediaCategories%\%ADIGUID.CenterVol%,Name,,%Control.CenterVol% HKLM,%MediaCategories%\%ADIGUID.CenterVol%,Display,1,00,00,00,00 HKLM,%MediaCategories%\%ADIGUID.LfeVol%,Name,,%Control.LfeVol% HKLM,%MediaCategories%\%ADIGUID.LfeVol%,Display,1,00,00,00,00 HKLM,%MediaCategories%\%ADIGUID.SwapC%,Name,,%Control.SwapC% HKLM,%MediaCategories%\%ADIGUID.SwapC%,Display,1,00,00,00,00 HKLM,%MediaCategories%\%ADIGUID.SwapD%,Name,,%Control.SwapD% HKLM,%MediaCategories%\%ADIGUID.SwapD%,Display,1,00,00,00,00 HKLM,%MediaCategories%\%ADIGUID.CaptureWOMix%,Name,,%Control.CaptureWOMix% HKLM,%MediaCategories%\%ADIGUID.CaptureWOMix%,Display,1,00,00,00,00 HKLM,%MediaCategories%\%ADIGUID.CAC3%,Name,,%Control.CAC3% HKLM,%MediaCategories%\%ADIGUID.CAC3%,Display,1,00,00,00,00 HKLM,%MediaCategories%\%ADIGUID.CPCM%,Name,,%Control.CPCM% HKLM,%MediaCategories%\%ADIGUID.CPCM%,Display,1,00,00,00,00 [DriverInfo.DelReg] HKLM,Software\InstalledOptions\%DriverOEM%\%DriverFamily%\%DriverMfgr%\%DriverProduct% [DriverInfo.AddReg] ; This section is added to all INFs to add registry entries for Driver Information. HKLM,Software\InstalledOptions\%DriverOEM%\%DriverFamily%\%DriverMfgr%\%DriverProduct%,Description,,%DriverDescription% HKLM,Software\InstalledOptions\%DriverOEM%\%DriverFamily%\%DriverMfgr%\%DriverProduct%,CurrentVer,,%DriverOEMVersion% HKLM,Software\InstalledOptions\%DriverOEM%\%DriverFamily%\%DriverMfgr%\%DriverProduct%,Ver_%DriverOEMVersion%,,%DriverVersionID% HKLM,Software\InstalledOptions\%DriverOEM%\%DriverFamily%\%DriverMfgr%\%DriverProduct%, DriverBuildDate,,%DriverBuildDate% HKLM,Software\InstalledOptions\%DriverOEM%\%DriverFamily%\%DriverMfgr%\%DriverProduct%, BaseDriverFileName,,"smwdm.sys" HKLM,Software\InstalledOptions\%DriverOEM%\%DriverFamily%\%DriverMfgr%\%DriverProduct%, BaseDriverFileVersion,,"5.12.5280" HKLM,Software\InstalledOptions\%DriverOEM%\%DriverFamily%\%DriverMfgr%\%DriverProduct%, INFVersion,,%INFVersionID% [SourceDisksNames] 222=%Empty%,,, [SourceDisksFiles] smwdm.sys=222 smwdmCH7.inf=222 ;; copy these files into the ;; system32\drivers directory [WDM_AC97AUD.CopyList] smwdm.sys ;;**************** AMD64 NT Install **************** [WDM_SHADOW.NTAMD64] Include=ks.inf,wdmaudio.inf Needs=Ks.Registration,WDMAUDIO.Registration DelReg=WDM_AC97AUD.DelReg, DriverInfo.DelReg CopyFiles=WDM_AC97AUD.CopyList AddReg=WDM_AC97AUD.AddReg, WDM_AC97AUD_GUID.AddReg, DriverInfo.AddReg, Zeus.AddReg, Valentin.AddReg, SteCom.AddReg,COMMON2.AddReg, SPDIFLAP.AddReg [WDM_SHADOW.NTAMD64.Interfaces] AddInterface=%KSCATEGORY_AUDIO%,%KSNAME_Wave%, AC97Aud.Interface.Wave AddInterface=%KSCATEGORY_RENDER%,%KSNAME_Wave%, AC97Aud.Interface.Wave AddInterface=%KSCATEGORY_CAPTURE%,%KSNAME_Wave%, AC97Aud.Interface.Wave AddInterface=%KSCATEGORY_AUDIO%,%KSNAME_Topology%, AC97Aud.Interface.Topology [AC97Aud.Interface.Wave] AddReg=AC97Aud.Interface.Wave.AddReg [AC97Aud.Interface.Wave.AddReg] HKR,,FriendlyName,,%AC97Aud.Wave.szPname% HKR,,CLSID,,%Proxy.CLSID% [AC97Aud.Interface.Topology] AddReg=AC97Aud.Interface.Topo.AddReg ;;must use topo because topology is too long [AC97Aud.Interface.Topo.AddReg] HKR,,FriendlyName,,%AC97Aud.Topology.szPname% [WDM_SHADOW.NTAMD64.Services] AddService = smwdm, 0x00000002, WDM_AC97AUD_Service_Inst [WDM_AC97AUD_Service_Inst] ;DisplayName = %WDM_AC97AUD.SvcDesc% ServiceType = 1 ; SERVICE_KERNEL_DRIVER StartType = 3 ; SERVICE_DEMAND_START ErrorControl = 1 ; SERVICE_ERROR_NORMAL ServiceBinary = %10%\system32\drivers\smwdm.sys [Strings] ;; AC'97 Device friendly names (GUIDS non-localizeable) ADIGUID.PcBeep ="{992C6360-643D-11D2-9BDC-00A0C9696B7D}" ADIGUID.MonoOut ="{992C6361-643D-11D2-9BDC-00A0C9696B7D}" ADIGUID.Phone ="{992C6362-643D-11D2-9BDC-00A0C9696B7D}" ADIGUID.Video ="{992C6366-643D-11D2-9BDC-00A0C9696B7D}" ADIGUID.PCBeepVol ="{992C6372-643D-11D2-9BDC-00A0C9696B7D}" ADIGUID.MonoVol ="{992C6374-643D-11D2-9BDC-00A0C9696B7D}" ADIGUID.PhoneVol ="{992C6376-643D-11D2-9BDC-00A0C9696B7D}" ADIGUID.VIDVol ="{992C637A-643D-11D2-9BDC-00A0C9696B7D}" ADIGUID.20DB ="{992C6380-643D-11D2-9BDC-00A0C9696B7D}" ADIGUID.PHATBypass ="{992C6387-643D-11D2-9BDC-00A0C9696B7D}" ADIGUID.MicSelect ="{992C638D-643D-11D2-9BDC-00A0C9696B7D}" ADIGUID.CaptureVid ="{992C6392-643D-11D2-9BDC-00A0C9696B7D}" ADIGUID.CaptureMono ="{992C6396-643D-11D2-9BDC-00A0C9696B7D}" ADIGUID.CapturePhone ="{992C6397-643D-11D2-9BDC-00A0C9696B7D}" ADIGUID.Front ="{992C636A-643D-11D2-9BDC-00A0C9696B7D}" ADIGUID.Surround ="{992C6365-643D-11D2-9BDC-00A0C9696B7D}" ADIGUID.Center ="{992C6364-643D-11D2-9BDC-00A0C9696B7D}" ADIGUID.Lfe ="{992C6363-643D-11D2-9BDC-00A0C9696B7D}" ADIGUID.FrontVol ="{992C6370-643D-11D2-9BDC-00A0C9696B7D}" ADIGUID.SurroundVol ="{992C6381-643D-11D2-9BDC-00A0C9696B7D}" ADIGUID.CenterVol ="{992C6382-643D-11D2-9BDC-00A0C9696B7D}" ADIGUID.LfeVol ="{992C6383-643D-11D2-9BDC-00A0C9696B7D}" ADIGUID.SwapC ="{A3156CDD-A925-4A37-BD1F-BC9D627F3F06}" ADIGUID.SwapD ="{A3156CDE-A925-4A37-BD1F-BC9D627F3F06}" ADIGUID.CaptureWOMix ="{992C636C-643D-11D2-9BDC-00A0C9696B7D}" ADIGUID.CAC3 ="{A3156CD9-A925-4A37-BD1F-BC9D627F3F06}" ADIGUID.CPCM ="{A3156CDA-A925-4A37-BD1F-BC9D627F3F06}" ;; Analog Devices friendly names (localizeable) ;Sources (Pins) Pin.PcBeep ="PC Beep" ; PC Beep Input Pin.MonoOut ="Mono Out" ; Mono line output Pin.Phone ="Phone" ; Phone Input Pin.Video ="Video" ; Video Input Pin.Front ="Front" ; Front Output Pin.Surround ="Rear" ; Surround Output Pin.Center ="Center" ; Center Channel Output Pin.Lfe ="Subwoofer" ; Sub woofer ( Lfe ) ;Controls (Controls as related to Sources) Control.PCBeepVol ="PCBeep Volume" ; PC Beep volume control name Control.PhoneVol ="Phone Volume" ; Phone volume control name Control.VIDVol ="Video Volume" ; Video volume control name Control.20DB ="MIC Boost" ; Microphone advanced control Control.PHATBypass ="Apply 3D effect to digital audio" ; 3D bypass control string (bypass ; spatialization on digital streams) Control.MonoVol ="Mono Volume" ; Monoaural Output volume control name Control.MicSelect ="Front Panel Microphone" ; Microphone advanced control Control.CaptureVid ="Video" ; Video Record Control.CaptureMono ="Mono Out" ; Mono Mix Record Control.CapturePhone ="Phone" ; Phone Record Control.FrontVol ="Front Volume" ; Front Output Control.SurroundVol ="Rear Volume" ; Surround Output Control.CenterVol ="Center Volume" ; Center Channel Output Control.LfeVol ="Subwoofer Volume" ; Sub woofer ( Lfe ) Control.SwapC ="Swap Center/Subwoofer" Control.SwapD ="Swap Center/Subwoofer Data" Control.CaptureWOMix ="WAVEoÍMIX" ; Wave Out Mix Record Control.CAC3 ="AC3 SPDIF" ; AC3 Select Control.CPCM ="PCM SPDIF" ; PCM Select MediaCategories="SYSTEM\CurrentControlSet\Control\MediaCategories" WDM_MIDI="WDM-based Device" Proxy.CLSID="{17CCA71B-ECD7-11D0-B908-00A0C9223196}" KSCATEGORY_AUDIO="{6994AD04-93EF-11D0-A3CC-00A0C9223196}" KSCATEGORY_RENDER="{65E8773E-8F56-11D0-A3B9-00A0C9223196}" KSCATEGORY_CAPTURE="{65E8773D-8F56-11D0-A3B9-00A0C9223196}" KSNAME_Wave="Wave" KSNAME_Topology="Topology" ANLG="Analog Devices" MfgName="Analog Devices, Inc." Empty="Install disk" *WDM_AC97AUD.DeviceDesc="SoundMAX Integrated Digital Audio" AC97Aud.Wave.szPname="SoundMAX Digital Audio" AC97Aud.Topology.szPname="SoundMAX Digital Audio" ; History Information DriverMfgr="AnalogDevices" DriverVersionID="5.12.5280" DriverBuildDate="02/03/2005" DriverBuildID="5.12.02.5280" INFVersionID="5.12.02.5280-0012" DriverOEM="AnalogDevices" DriverFamily="Audio" DriverProduct="SoundMAX" DriverDescription="Audio Driver" DriverOEMVersion="x00"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.