QLogic 1GB PCI Ethernet NDIS Miniport Driver for Windows
Release Notes
April 17, 2007
This software license applies only to QLogic customers.
QLogic Corporation.
All rights reserved.
Table of Contents
1. Version
2. Changes
3. Bug Fixes
4. Known Issues
5. Additional Information
6. History
7. Trademarks
8. Notices
9. Contacting Support
1. Version
These release notes describe the changes, fixes, known issues, and
release details that apply to 1GB PCI Ethernet NDIS miniport driver,
version 2.0.2.1.
2. Changes
The following changes have been made to the 1GB PCI Ethernet NDIS
miniport driver between versions 2.0.2.0 and 2.0.2.1.
Document
* None
Driver
* Changed Version from 2.0.2.0 to 2.0.2.1.
3. Bug Fixes
The following fixes have been made to the 1GB PCI Ethernet NDIS
miniport driver between versions 2.0.2.0 and 2.0.2.1.
* Fixed the packet drop issue on IPShare mode
4. Known Issues
* None
5. Additional Information
None
6. History
2.0.2.0 - 03/23/07
* Added support for SUBSYS_036D1014
* Added support for SUBSYS_036F1014
* Added support for SUBSYS_03711014
2.0.2.0-B13 - 03/16/07
* Fixed the problem of WHQL 2c_oidsndisrequest.
2.0.2.0-B12 - 02/08/07
* Fixed the problem of WHQL NDISTEST6.0 1c_kernelcalls failture.
* Added support for ISP4032 SUBSYS_01591077
2.0.2.0-B12 - 02/08/07
* Fixed the problem of WHQL NDISTEST6.0 1c_kernelcalls failture.
* Added support for ISP4032 SUBSYS_01591077
2.0.2.0-B11 - 02/05/07
* Changed the ReadmeN.txt and ReleaseN.txt format.
* Added support for Agere PHY.
* Fixed the problem of WHQL NDISTEST6.0 2c_addresschange failture.
2.0.2.0-B10 - 01/03/07
* Signature Release
2.0.2.0-BA - 12/05/06
* Enhancements for NVRam Access for some specific system
2.0.2.0-B9 - 04/25/06
* Added support 16 RX buffer entries
2.0.2.0-B8 - 04/25/06
* Fxied the NetworkAddress issue
2.0.2.0-B7 - 04/21/06
* Added the StopByFatalError
* Added the DEBUG_ID_EN and ID B032
* Added the Fatal Error Reset
2.0.2.0-B6 - 04/11/06
* Fixed the netperf one byte packet issue
2.0.2.0-B5 - 01/13/06
* Implemented VLAN for ISP4032.
2.0.2.0-B4 - 01/05/06
* Added iSCSI function detection with promiscuous mode set
2.0.2.0-B3 - 12/15/05
* Fixed CancelSendPackets issue
2.0.2.0-B2 - 11/28/05
* Added support for ISP4032 SUBSYS_014D1077, SUBSYS_01501077, SUBSYS_01531077, SUBSYS_01551077, SUBSYS_01571077
* Fixed Link detection issue
2.0.1.1 - 10/21/05
* Enhancements
2.0.1.0 - 09/30/05
* Added support for NDIS5.1
* Added support for VLANTag
2.0.0.0 - 06/20/05
* Added support for sharedip.
* Added verification of forced link configuration parameter
* Added support for ISP4022 SUBSYS_02E31014, SUBSYS_03231014
* Delayed reset acknowledgement until pending transmits are completed.
7. Trademarks
QLogic, the QLogic logo, QLA, SANbox, SANsurfer, and SANblade are
registered trademarks of QLogic Corporation.
SANtrack and SAN Express are trademarks of QLogic Corporation.
All other brand and product names are trademarks or registered
trademarks of their respective owners.
8. Notices
Information furnished in this document is believed to be accurate and
reliable. However, QLogic Corporation assumes no responsibility for
its use, nor for any infringements of patents or other rights of
third parties which may result from its use. QLogic Corporation
reserves the right to change product specifications at any time
without notice. Applications described in this document for any of
these products are only for illustrative purposes. QLogic Corporation
makes no representation nor warranty that such applications are
suitable for the specified use without further testing or
modification. QLogic Corporation assumes no responsibility for any
errors that may appear in this document.
9. Contacting Support
Please feel free to contact your QLogic approved reseller or QLogic
Technical Support at any phase of integration for assistance. QLogic
Technical Support can be reached by the following methods:
Web: http://support.qlogic.com
North America Contact Information
Email: support@qlogic.com
Phone: (952) 932-4040
Support contact information for other regions of the world is
available at the QLogic website: http://support.qlogic.com
© Copyright 2007. All rights reserved worldwide. QLogic, the QLogic
logo, and the Powered by QLogic logo are registered trademarks of
QLogic Corporation. All other brand and product names are trademarks
or registered trademarks of their respective owners.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.