Ether-FSH2402GT Remote Management Tool 1.04.001
===============================================
Version: 1.04.001
README file updated on: 2003-09-17
(c) Copyright OvisLink Corp. All Rights Reserved.
Table of Contents
-----------------
1. Introduction
2. Requirements
3. Installation procedure
4. History
Introduction
------------
The Remote Management Tool, is a Window-based software package
that implements RRCP functions at the management host side. The Remote
Management Application gives network administrators the ability to configure and
monitor dumb layer 2 switches like intelligent switches.
Requirements
---------------
Hardware
Pentium class processor
32 MB RAM
Software
WindowsR 98 , ME, NT 4.0
Service Pack 6, 2000, XP
WinPCap 3.0
Installation procedure
-------------------------
To install the Remote Management Application, you should follow the following
simple steps:
1. Run the installer program by double-clicking on the
setup.exe icon.
2. Follow the instructions of the installer program to install the
Remote Management Tool.
3. Done! The software should be installed in your Systems directory.
After you install the Remote Management Tool on your computer, an
application folder is placed on the desktop.
To start Management Application, do the following:
„hDouble-click the rmt icon in the folder.
**What files are installed?**: The Remote Management Application installer will
install the following files on your system:
* README.txt (This README file.)
* rmsLib.dll
* rmt.exe (main program)
**Uninstalling Ether-FSH2402GT Remote Management Tool **: To remove the Remote Management Tool from your system, you should use the "Add/Remove Programs" control panel in Windows. In the listbox that is presented to you, choose "Remote Management Tool" and click "remove."
History
--------
**Features of Remote Management Application 1.04.001**
* Show switch status
- Overview
- MIB Counter
- Port status
* Configuration
- Port Configuration
- Global Configuration
- Qos Configuration
- Vlan Configuration
- Vlan Control
- Device Feature
* Security
- Device Security
* Diagnostic
- Fault Information
- Device Reset
* Save setting to a file. Settings can be saved for future reuse.
* Load setting to the switch registers.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.